Oil Mist Applications available in Vanuatu
-
Premium
Particle Measurement Instruments for Particle Filtration Research
Different types of filters such as fiber filters, membrane filters and fabric filters can be used to remove particles from air flow. The removal of the particles by the filter happens via different mechanism including interception, impaction, diffusion and electrostatic attraction. Typically, the effectiveness of the filter is described with a filtration efficiency value, which is the efficiency of the filter to remove particles from the air flow in percentage (0–100 %). The amount of removed particles by ...
By Dekati Ltd. based in Kangasala, FINLAND.
-
Premium
Smoke generator device for oil mist generation
Concept’s OMG is used by many of the worlds leading specialists in Oil Mist Detection including Specs, Dr Horn , Honeywell, Kidde, Valcom, Daihatsu, Schaller and ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Applications and Air Pollutants Removed in the Textile Industry
Remove oil mists and blue haze from tenter frame ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Solid/liquid separation for food & beverages
Everything from presses and centrifuges to filters, screens, and drying systems for food and beverage producers worldwide. The right ingredients for your success in the food industry: Want to get more from less? Purer products? Better taste? With more than 100 years’ experience in the food industry, serving everyone from multinationals to smaller family operations, we can promise you one thing: your goals come ...
By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.
-
Air pollution control solution for plastics industry
For processes where plastics are molded or extruded (as evidenced by a “hazy” exhaust plume at the stack) scrubbers are used to treat the sub-micron particulates and oil mists generated. Certain other processes (e.g. Fiberglass Reinforced Plastic equipment fabrication) emit VOCs that can be captured with ...
By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).
-
Air pollution control solution for textile/carpet industry
The textile industry typically produces an oil mist haze that creates a visible plume from the stack. The haze comes from the oils, surfactants, and chemicals used in the manufacturing process as well as from machinery oil. Many facilities employ a scrubber or an oxidizer to remove the ...
By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).
-
Mixers - Industrial Agitators for Wastewater Treatment
WATER TREATMENT IS A COMPLEX SEQUENCE OF PROCESSES AND REACTIONS. Each stage of the wastewater process is dependent on the previous. This interdependency is critical to our approach to designing mixers for you. The quality and control of the overall wastewater process depends on it. We have decades of experience designing mixers for wastewater treatment. As a result, our mixers are designed for the intricate needs of your wastewater treatment processes. ...
By Dynamix Agitators Inc. based in Richmond, BRITISH COLUMBIA (CANADA).
-
Solid/liquid separation for mining & minerals industry
Our capabilities for the minerals and mining industry. Need to boost ore throughput? Improve your separation of precious minerals? Whatever your mineral processing needs, we help you reduce operating costs and improve ...
By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.
-
Mist eliminator application as separation in gas and liquid
Mist eliminator also named misting elimination is used as the mechanical separation of liquids from gases. It is also used in liquid-liquid separation. ...
By Boegger Industrial Limited based in Anping, CHINA.
-
Oil Mist and VOC Collection
Oil Mist is Unbreathable. Oil based cutting fluids are often used in CNC milling, machining and metalworking. During production, these processes can produce a mist that can threaten sensitive electronic circuitry and presents serious physical risks to employees (accidents from slipping, breathing hazards).? What are the risks in a workshop with oil mist? Exposure to oil mist for a prolonged period of time can cause a number of health issues. Dermatitis Eye, nose and throat irritation Damage to the respiratory ...
By Diversitech based in Montreal, QUEBEC (CANADA).
-
Hydrogen sulfide removal in sludge management
In the treatment of sanitary sewage, bio-solids are separated from the liquid. These bio-solids are concentrated and dewatered using filter presses, centrifuges, or other devices. Hydrogen sulfide and mercaptans are released during the dewatering operation. Carus permanganates react quickly and produce immediate results for hydrogen sulfide removal in order to provide a safe, odor free environment and minimize corrosion due to ...
By Carus Corporation based in Peru, ILLINOIS (USA).
-
Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries
From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing ...
By Bionomic Industries Inc based in Mahwah, NEW JERSEY (USA).
-
Fire and explosion protection solutions for the wood and paper industry
We provide explosion protection for wood processing factories where wood waste and dust pose a hazard. Various wood processing technologies show that flammable wood waste or dust accumulates in these facilities. In terms of evaluating the risk of explosion, finely sedimented dust is hazardous and in the event that this finely sedimented dust suspends and is connected to an ignition source, and explosion will ...
By RSBP spol. s r. o. based in Ostrava, CZECH REPUBLIC.
-
Sludge transfer and sludge feed applications
Bredel hose pumps reduce overall operating costs from reduced downtime and the elimination of ancillary costs when feeding primary or thickened sludge to digesters or dewatering devices like centrifuges & filter ...
By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.
-
Depuration of oil and emulsion mists
In machine shops, where the production is centered on the use of machine tools, one of the most common problems is the restoration intervention aimed at limiting the presence of oil or emulsion fogs. As a matter of fact, since machine tools work at very quick production rhythms, they widely use lubricating fluids such as oil or oil emulsions and ...
By GGE srl based in Rio Saliceto (Reggio Emilia), ITALY.
-
Membrane filtration systems for biotechnology and pharmaceutical industry
GEA Filtration is experienced in processing a wide range of products on a commercial basis and by testing products at the plant site or in our pilot plant testing facility. Definition of the Industrial Biotech and Environmental Biotech Sector. This sector uses living organisms to manufacture a variety of products that result in the reduction of pollution, resource consumption and waste. Typical products include bioethanol, industrial enzymes, biological fuel cells, enzymes for bioremediation, biodegradable ...
By GEA based in Hudson, WISCONSIN (USA).
-
Oil Mist Separators for Shipbuilding
A Contec oil mist separator (COMS), type 9.200/762, with special frame construction for the lubrication system of the energy supply is being used on the latest cruise ship of the Celebrity Cruises shipping line. The energy requirements of the cruise ship - built by Meyer Werft Papenburg - is covered by four MAN Diesel & Turbo SE, type 14V48/60CR, diesel engines. The Contec oil mist separator, type 9.200/762, with upstream demister and M6 filter cartridge ensures the reduction of particle contamination. ...
By Contec GmbH based in Bad Honnef, GERMANY.
-
Chemical solutions for water treatment industry
We have a wide range of products for water treatment, highlighting organic coagulants and, especially, the exclusive flocculants from our HIMOLOC thecnology. Water is the most precious natural resource. Its scarcity and contamination is becoming an increasingly serious problem. The major source of this contamination comes from domestic and industrial use and its discharge as waste. Being water an indispensable staple for an advanced society and necessary for economic and industrial development, the availability ...
By Derypol, S.A. based in Barcelona, SPAIN.
-
Hydrocyclones for chemical plants applications
KREBS® hydrocyclones, including Krebs gMAX hydrocyclones, are simple, yet highly effective equipment for removing and / or concentrating solids in chemical ...
By FLSmidth based in Tucson, ARIZONA (USA).
-
Industrial Meshes for Solid-Liquid-Filtration
SolidWEAVE stainless steel filter media for solid-liquid-filtration are the basis for a wide range of industrial process steps. They are used successfully in various filtration devices like cartridge filters, drum filters, vertical pressure leaf filters or ...
By GKD - Gebr. Kufferath AG based in Düren, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you