Paint Booth Applications available in Manitoba
-
Premium
Gas detection in the transportation industry
The manufacture and use of motor vehicles is always associated with gas and fire hazards and other risks. This applies to the production facilities in which individual components are manufactured or the vehicles are assembled, as well as tunnels and parking garages in which exhaust gases can accumulate. The type of gas hazard differs in the areas of application, but the goal to be achieved remains the same everywhere - the safety of people and the infrastructure. With its wide range of gas monitoring products, ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Air pollution control for the composite & carbon fiber industry
Ensure Worker Safety and Reduce Production Costs. Anguil’s engineering expertise and reliable environmental solutions can reduce the cost of manufacturing and keep pollutants from reaching workers or the community. ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Water treatment chemicals solutions for automobile manufacturing industry
When automobiles are manufactured, each vehicle is painted by spraying a mist (paint mist) onto the car body and other parts. This process is referred to as the paint booth, and it ensures the beautiful finishing of car bodies and components and rust proofing. The excess paint that does not to cling to the car body and parts in the paint booth falls to the floor and is collected by water. This water is used as recycling water after removing the paint with water treatment ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Smoke generator devices for lev testing, spray booth clearance testing & air tracing
For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of 'clearance times' for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Air pollution control for the paint & painted products industry
Anguil’s engineering expertise and flexible solutions guarantee destruction efficiency and optimized performance so your plant can focus on producing quality painted ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Air pollution control for the automotive manufacturing industry
Anguil’s Engineering expertise and flexible solutions guarantee compliance and optimized performance so your automotive plant can focus on production and avoid supply chain ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Ice blasting technology for building restoration and remediation
Applications of Coulson Ice Blast for Building Restoration and Remediation sector: Ice Fire and Smoke Damage Water and Flood Damage Asbestos Removal (Negligible Airborne @ 0.035 mg/m3) Mold Remediation Adhesive removal Reversal of corrosive contaminates Wood Resurfacing General cleaning Brick Stone Concrete Tile Wood Metal Tank cleaning Tar removal Vintage aircraft cleaning Enhanced Ice Soot Lead Paint abatement ...
By Coulson Ice Blast based in IRELAND.
-
Dustless Lead Paint Removal & Nuclear Decon Tools for Lead Paint Removal
No respirator required. No containment structures. Osha, epa, rcra & sspc compliance. Combine removal, containment and final packaging into a one-step process using Pentek’s complete lead paint abatement system. The fully integrated process reduces or eliminates the need for worker respiratory protection by reliably reducing hazardous dust emissions far below regulatory ...
By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).
-
Engineered clean air solutions for lean manufacturing applications
Whether you call it lean manufacturing or Just-in-Time (JIT) manufacturing, eliminating waste isn’t a new concept for bottom-line minded manufacturers. But, it isn’t easy to reduce operating costs while creating more value for your customers. This is especially the case for welding, sanding, painting, or other processes that produce harmful air contaminants and create production bottlenecks for larger construction projects. What if you had a portable, clean air solution to protect your employees from ...
By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).
-
Air purification / filtration systems for painting & coating
Do you require painting or coating applications as part of the manufacturing or service process in your workplace? Industrial painting & coating are known to produce dangerous by-products such as VOCs (volatile organic compounds) and dust. Proper ventilation and filtration is a must, as working in close proximity to the fumes and particles created by the painting and coating process cause devastating health ...
By Diversitech based in Montreal, QUEBEC (CANADA).
-
Engineered clean air solutions for marine applications
You already know there’s no such thing as simple one-piece flow when it comes to boat building and repair. Larger pieces must be built in place and smaller subsystems, pipelines, and foundations are usually brought to the site. For smaller crafts, hulls and decks must be moved between workstations, usually via overhead ...
By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).
-
Odor control for composite
A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air ...
By OMI Industries (OMI) based in Palatine, ILLINOIS (USA).
-
Blastox for One Step Lead Paint Abatement
Lead paint abatement is the process of abrasive blasting lead paint and encapsulating the lead particles rendering them non-hazardous. Blastox® has been used to successfully stabilize over 150,000,000 square feet of lead based paint. This success is owed to the One Step application of Blastox®. Since its available pre-blended with various media throughout North America, it is ready for application once the blended media reach your job-site for lead paint ...
By The TDJ Group, Inc based in Barrington, ILLINOIS (USA).
-
Engineered clean air solutions for metal fabrication applications
Whether you’re cutting, welding, coating, grinding, or sanding, every metal fabrication task produces dust and fumes that can threaten your employees’ safety, derail productivity, increase maintenance costs, and place you in directly in the EPA’s crosshairs. Oil mist and dust particles can settle into every crack and crevice of your machinery, electronics, and cooling fans, eventually causing equipment failure and downtime. Who has the time and resources to redesign an entire facility around a ...
By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).
-
Engineered clean air solutions for transportation applications
From alternating between initial paint sprays and repairs with finishing and coating applications, you’re too busy to worry if your shop floor air is OSHA or EPA compliant. You want to protect your employees against sanding dust and spray fumes, but facility-wide HVAC systems can suck the air out of your bottom line. What if you had a cost-effective, clean air solution that could protect your employees from airborne hazards and even speed up drying times for a more efficient work ...
By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).
-
Air Pollution Control Solution for Paint Spray Industry
Spray booths in automotive, golf ball, and parts applications generally require particle control from over-spray as well as VOC control. Wet scrubbers are effective in controlling the droplets and protecting the down-stream thermal oxidizers from fouling with the non-combustible inorganic ...
By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).
-
Evaporators and concentrators for painting
Wastewater from painting booths, pre-washing waste stream, washing ...
By Eco-Techno SRL. based in Busnago MB, ITALY.
-
Engineered clean air flexibility solutions for alternative energy applications
Environmental control is easier said than done when you’re manufacturing alternative energy solutions. Humidity, temperature fluctuations, and dust can corrode your copper solar panel or battery components. Metal finishing, coating, or painting containment is a daunting task when working with behemoth turbine bases and blades. But, how do you isolate your critical processes in a controlled clean air environment without breaking your material handling budget? The answer is a flexible indoor air filtration ...
By Duroair Technologies Inc. based in Niagara Falls, ONTARIO (CANADA).
-
Air pollution control catalyst solutions for industrial air pollution control sector
There are many options when choosing a type of system to control Industrial Air Pollution, in particular VOC (volatile organic compound emissions). While thermal oxidation is a method used quite often, catalytic oxidation remains amongst the lowest total cost of ownership methodology for abating VOC’s. Applied Catalysts manufactures a full portfolio of catalysts, trademarked Abate VOC, on varied supports. Depending on the application or style of catalytic oxidizer to be employed, ceramic or metal monolith, ...
By Applied Catalysts based in Doraville, GEORGIA (US) (USA).
-
HS PROTECT Paint Booth Protection
HS PROTECT – BOOTH PROTECTION Designed to protect spray cabin walls and floors against accumulated deposits of paint and over spray. ° Build up of paint and over spray can reduce the lighting that is crucial for quality painting. ° Repeated washing ...
By HS Protect based in Stekene, BELGIUM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you