painting booth Articles

  • Lumen Recommendations for Common and Industrial Work Spaces

    Lumen Recommendations for Common and Industrial Work Spaces Light brightness requirements for common and industrial spaces differ greatly. To achieve consistent, bright environments, the fixture’s luminous flux (or lumen [lm], which is the SI unit of luminous flux) must be taken into consideration. By definition, the term “luminous flux” (lx) refers to ...


    By Larson Electronics LLC

  • Case study - Paint booth over spray

    OVERVIEW A major automotive component supplier needed to control the emissions from its paint spray process. The plant emissions had characteristics common to many paint spray plants: high air flow, low volatile organic compound (VOC) concentration and particulate. The company needed an emission control solution that had low operating costs and that could also fit in their limited ...

  • Explosion Proof vs Intrinsically Safe Gas Detectors

    It only takes a spark to start a fire or cause an explosion, especially when flammable gases or vapours are present under the right conditions. There are industries that operate in these types of hazardous environments where the potential for explosions is extremely high, such as chemical plants, oil refineries, paint shops, cleaning facilities, tanks and loading facilities for flammable gases, ...

  • Automobile Paint

    Problem: A car manufacturing plant were experiencing difficulties in removing painting sludge from their spray booth wastewater. The original vacuum filters had never achieved the performance required for the spray booths, which contained "robotic" spray ...


    By HydroCal Inc.

  • Small Area Paint Removal Possible Only With Wet Sandblaster Pressure Washers

    Paint removal has always been a difficult task for cleaning workers and requires the use of robust machines that can remove paint from both large and small areas. Pressure washers are the ideal machines that can handle tasks like small area paint removal efficiently. The exceptional versatility and power of regular pressure washers has always been appreciated by professional cleaning experts. ...


    By Daimer Industries Inc.

  • LATEST TECHNOLOGY: Low NOx PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Small PAINT BOOTH OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low Cost PAINT BOOTH VOC OXIDIZERS

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • LATEST TECHNOLOGY: Low Fuel Cost PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Gas Pressure Washers with Combination of Power, Mobility and Versatility

    Power cleaning machines are now popularly used to manage a wide range of maintenance applications. Whether you need to clean your car, spot clean paint or degrease industrial machinery, cleaning professionals will recommend using power cleaners. To meet the demands of different cleaning tasks, suppliers now offer pressure cleaners with varying pressure levels and flow rates. Pressure cleaning ...


    By Daimer Industries Inc.

  • Exhaust Gas Treatment in Paint Shops: Volkswagen chooses catalytic afterburning

    Paint shops are an energy-intensive step in the automotive manufacturing process. One of the world´s largest paint-shop complexes is operated by the Volkswagen Group at its main plant in Wolfsburg. In the past VW used hot air from thermal afterburners to heat its paint dryers. Following a detailed review, the company was one of the first to decide to ...


    By Clariant International Ltd.

  • Optimal vehicle batching and sequencing to reduce energy consumption and atmospheric emissions in automotive paint shops

    Reducing energy consumption and carbon emissions is an important issue to achieve sustainable manufacturing. In automotive assembly plants, the largest amount of energy consumption and atmospheric emissions is in paint shop. Optimising the energy usage to pursue maximum energy savings, and reducing carbon dioxide equivalent emissions are of significant importance in automotive paint shops. ...


    By Inderscience Publishers

  • Organotin compounds in sediments of three coastal environments from the Patagonian shore, Argentina

    One of the most toxic compounds that have been introduced into the marine environment is Tributyltin (TBT) used as a biocide in antifouling paints. The aim of this study was to obtain the first information of TBT pollution in sediments of three environments of the Argentinean coastline. Sediments from the Bahia Blanca estuary, San Antonio Bay and Ushuaia Bay were sampled to determine TBT and ...


    By Inderscience Publishers

  • Asian Paints minimizes environmental impact and maximizes new operational efficiencies

    Asian Paints Ltd. operates in 22 countries around the world. It maintains 27 paint manufacturing facilities and serves consumers in 65 countries. As a truly global enterprise, Asian Paints is aware of the impact its operations have on the environment and is strongly committed to following the latest best practices for “green productivity.” Specifically, the company is working to ...


    By IHS

  • Very large waste gas volumes with low contaminant concentration - Case Study

    Example: Electronics industry Similar tasks: Paint shops, spectacle coating, coating on the inside of cans The electronic industry produces semiconductors that generate very large waste gas streams that are only slightly contaminated. These waste gas streams are purified in rotary adsorbers. The continuous regeneration of the adsorbers generates highly contaminated ...

  • Case study - Plastic components painting

    Overview A plastic injection molding company in Wisconsin is known as a world-class leader in the industry for their secondary decorating and assembly capabilities. One of their eleven facilities not only performs plastic injection molding but also provides the organization with decorating capabilities such as painting, laser etching, laser marking, pad printing and assembly of ...

  • Case study - Paint spray

    Problem A major automotive component supplier needed to control the emissions from its paint spray process. The plant emissions had characteristics common to many paint spray plants: high air flow, low volatile organic compound (VOC) concentration and particulate. The company needed an emission control solution that had low operating costs and that could also fit in their limited space. ...

  • Chemical Plant Desulfurization

    KRONOS’ facility in Leverkusen, Germany produces titanium dioxide, the most important material used by the paints and plastics industry for whiteness and opacity. When new German guidelines set maximum emission limits for SO2 in 1989, KRONOS was required to eliminate the COS from the off-gas at their titanium dioxide production facility to meet the new requirements.Complicating this application, ...


    By Merichem Company

  • Asahi/America Application Story – Water / Waste Treatment

    The City of Valdosta, GA need to upgrade their Wastewater treatment plants Chemical & Scrubber Systems Their OLD LEAKING CAUSTIC SYSTEM was Piped in CPVC and painted Red color. The entire piping system from the Chemical Room to point of use was to be replaced due to multiple failures both above and below ground. The OLD CPVC carrier; clear PVC 'Clam Shell' containment D/C System had failed ...


    By Asahi/America, Inc.

  • Air Emissions from the automobile manufacturing industry: a bio-oxidation pilot study of paint emissions control

    Bio•Reaction Industries (BRI) was contacted by Toyota to assess the abatement potential of an engineered bio-oxidation system (biofilter). The proposed intent of the pilot was to evaluate the effectiveness of biofiltration as available alternative to traditional VOC removal technology on an existing 3 stage wheel paint booth. A pilot unit consisting of a biotrickling filter and a separate ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you