Particulate Filtration Equipment For Air And Climate Available In Alabama
-
ShowcaseManufactured by atech innovations gmbhbased in GERMANY
atech innovations produces ceramic membranes for crossflow filtration suitable for many industries globally. The advantage of a crossflow filter is that it can operate continuously. The fluid moves over the membrane in a tangential direction so that particles on the filter surface are washed off. Even with high solids loads, the filter will not be ...
-
ShowcaseManufactured by Quantek Instruments, Inc.based in USA
The Quantek Model 902D is a benchtop oxygen and CO2 headspace analyzer, primarily used for gas flushed food packages. Achieve accurate oxygen and carbon dioxide measurements in 20-25 seconds. This headspace analyzer contains an internal pump to draw in sample from your package and display O2 and CO2 concentration results in 30 seconds. The expected oxygen sensor life is typically 5 years, unlike ...
-
ShowcaseManufactured by Labconco Corporationbased in USA
FlaskScrubber Glassware Washers are designed to wash and dry a wide variety of narrow-neck and general purpose labware. Utilizing a brilliant 5” touch screen display featuring CleanWorks OS, users have full control of wash parameters and washer settings. The included lower spindle rack consists of 36 spindles, and 18 glassware holders for narrow-neck glassware such as volumetric and ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Excalibur Water Systems Industrial Cooling Tower Side Stream Filters offer turbidity filtration in simplex, or multi-tank models and designs utilizing PLC controls with touch screen HMI and renowned industry components and medias for trouble-free ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF28BMHT heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with digital flowmeter and an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model DF28BMHT contains state of the art microprocessor electronics, which provides for corrected flow rate ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model DF-14MHT heavy duty hand truck mounted mobile low volume air sampler with digital flowmeter and an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model DF-14MHT contains state of the art microprocessor electronics, which provides for corrected flow rate measurements, volume totalizations, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model LV-14ME is a cart mounted low volume air sampler with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 122 cm - 213 cm (4' to 7') above floor level. The LV-14ME air sampler includes a 1/4 HP oil-less, carbon vane vacuum pump with a constant airflow regulator for use where a nearly constant airflow is desirable. The regulator holds ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400 (120VAC) and the T8400E (230VAC) Series Air Samplers are high volume air samplers with a two stage, thermally protected electric motor driven vacuum blower and a 7-foot long electrical cord. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. In addition, the measuring ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model GAS-28B Global Air Sampling System is a microprocessor controlled low volume air sampler consisting of an ¼ H.P. oil-less carbon vane vacuum pump with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line venturi by varying the flow through a bypass valve into the pump. This system ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model LV34ME consists of a 3/4 HP oil-less vacuum pump with an airflow regulator for use where a nearly constant airflow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying a bypass valve into the ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Pro 25% Oxygen Sampling Data Logger (CM-1000-00-00-52-00) is designed to measure oxygen levels over time in enclosed environments, used primarily in life sciences, incubation, and scientific and medical ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF8400E Digital Flowmeter Series air samplers are high volume air samplers with a two stage, thermally protected electric motor driven vacuum blower and a 7-foot long electrical cord. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. The flow rate is adjustable by use of a motor speed ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
Hydrophobic filters cover the inside vents of all our portable ambient air CO2 meters to allow airflow in while keeping out water droplets, dirt, dust, or mold spores that can affect the sensors. This makes our data logger suitable for extreme environment applications ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
This sensor pump kit contains all the accessories you need to draw samples using our SenseAir or GSS sensors, including our sensor SDKs. For sensors utilizing a tube cap, install the pump after the sensor allowing the sample to be pulled over the sensor membrane/chamber for accurate ...
-
PremiumManufactured by Powder Systems Limited (PSL)based in UNITED KINGDOM
The SimpleFilter is a cost-effective and user-friendly solution allowing efficient Nutsche filtration and drying of small and pilot scale batches. It is a compact and mobile system that can be easily moved throughout different production areas within the same ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model GAS-28BE Global Air Sampling System is a microprocessor controlled low volume air sampler consisting of an ¼ H.P. oil-less carbon vane vacuum pump with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400M (100-120VAC) and the T8400ME (200-240VAC) Series Air Samplers are high volume air samplers with two stage, thermally protected electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
Synspec supplies the NITROSTATION50RC product line of Ultra High Purity Nitrogen Generator with integrated Air compressor, to fit almost any type of application which needs independent supply of pure Nitrogen close to the consumer in an elegant 19” casing with full color display and touchpad. Compressed Air is first filtered from particulates down to 5µm and dried by a static dryer. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model FJ-28B is counter-top cabinet model, low-volume air sampler with a 1/4 HP oil-less carbon vane vacuum pump, and a constant air flow regulator for use where a near constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum head drop at all ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you