particulate monitoring equipment Articles

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...

  • Chemical characterization and preliminary source contribution of fine particulate matter in the Mexicali/Imperial valley border area

    ABSTRACTThe airshed shared by the Valley of Mexicali in Mexico and Imperial Valley in the United States frequently experiences high levels of particulate matter (PM) less than 10 #1;m (PM10). However, very little information exists on the concentration  and composition of fine PM (PM #2;2.5 #1;m, or PM2.5) in the region, particularly on the Mexican side of the border. This paper  ...

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By SIGRIST - PHOTOMETER AG

  • High resolution environmental monitoring to support the development of water quality legislation - Case Study

    Aquaread Ltd, an award winning British manufacturer of multi-parameter water quality test equipment, are supplying monitoring equipment and research funding to support the development of improved water quality guidelines across Europe. The research is being conducted in collaboration with scientists at the Aquatic Research Centre at the University of Brighton, and is already influencing ...


    By Aquaread Limited

  • A Method of Assessing Air Toxics Concentrations in Urban Areas Using Mobile Platform Measurements

    ABSTRACTThe objective of this paper is to demonstrate an approach to characterize the spatial variability in ambient air concentrations using mobile platform measurements. This approach may be useful for air toxics assessments in Environmental Justice applications, epidemiological studies, and environmental health risk assessments. In this study, we developed and applied a method to characterize ...

  • Biodiesel versus diesel: a pilot study comparing exhaust exposures for employees at a rural municipal facility

    Many organizations interested in renewable, domestic energy have switched from petroleum diesel to biodiesel blends for use in transportation and heavy-duty equipment. Although considerable evidence exists on the negative health effects of petroleum diesel exhaust exposures in occupational settings, there has been little research examining biodiesel exposures. Working collaboratively with a local ...

  • Minimising Risks to Air Quality and Regulatory Compliance With Total Filter Management

    It has been shown in recent studies that as much as 25% of the total site operating budget (excluding raw material costs) for a typical medium-large dosage-form manufacturing facility will be spent on compliance measures for internal quality systems and external regulatory activities. (1) Market realities indicate that the pharmaceutical companies will need to address the overall cost of ...


    By GVS Filter Technology

  • Office Printers Emit Ultra fine particle pollution

    We’ve heard quite a bit about particulate matter PM10s and PM2.5s as components of air pollution that we are exposed to on a daily basis. Recent research papers are highlighting the dangers of ultra fine particles (UFPs), which have a diameter of less than 0.1 micrometres (or 100 nanometres). By contrast, the diameters of particulate pollution from PM10s and ...


    By Commercial Air Filtration

  • Least-Cost Approaches to Reducing Acid Emissions

    ' The costs of meeting sulfur emission targets can be high. It is essential, therefore, that countries adopt policies which (a) minimize the net economic and social costs of reducing emissions to the agreed target levels, and (b) maximize the overlap between measures designed to reduce acidifying emissions and those addressing other forms of air pollution. This note discusses alternative ...


    By The World Bank

  • Controlling Dust and Bioaerosols at a Biosolids Composting Faclity

    Studies at enclosed Longmont, Colorado project evaluate exposure level of employees. Operational changes reduce dust, endotoxin and A. Fumigatus by 90 percent. WHEN dealing with public health issues and composting, attention has been predominantly focused on potential exposure from the release of Aspergillus fumigatus (A. fumigatus) from composting facilities. Numerous studies were conducted to ...


  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • CEMS: An Overview

    We've written an overview to where CEMS are required, types of site that require CEMS and future requirements. Continuous Emissions Monitoring Systems are used to continuously collect, record and report data from industrial process operators that produce emissions to air. CEMS are used as a means to comply with ...


    By a1-cbiss

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you