Particulate Monitoring Equipment For Air And Climate Available In South Korea
-
ShowcaseManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Polludrone is a fully integrated outdoor air quality monitoring system that delivers reference equivalent performance. Polludrone is a sensor-based air quality monitoring system for all the critical ambient environmental parameters related to air quality, noise, odour, weather, radiation. In addition, meteorological parameters like wind speed, wind direction, rainfall, flood levels, and ...
-
Showcasebased in USA
Clarity’s flagship particulate matter (PM) and nitrogen dioxide (NO2) monitor is self-powered, FCC/CE certified, UV-resistant, and weatherproof. A truly self-sufficient IoT air quality monitoring system with solar harvesting, internal battery, and global cellular communications, the Clarity Node-S accommodates site-specific requirements according to the customer’s needs, not the other ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The IsoAir® 310P Air Particle Sensor makes it easy to monitor air in remote locations or in areas with process restraints. Real-time particle monitoring gives quick notification of particle anomalies, detecting 0.5 and 5.0 µm for GMP and FDA compliance. A central vacuum is not needed to operate the particle sensor, and it features a built in “low noise” blower together with ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The Ultra DI 20 Plus liquid particle counter from Particle Measuring Systems (PMS) provides groundbreaking capabilities for monitoring of the most demanding ultrapure water systems. Counting and sizing contaminants as small as 20 nm in combination with real-time statistical analysis enables efficient characterization of filtration systems and optimum process control. The thermal stabilization ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
LiQuilaz II optical liquid particle counters are volumetric monitors with a variety of sizing sensitivities as low as 0.2 µm. They provide high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). LiQuilaz II sensors provide the same levels of accuracy, reliability and repeatability that customers have trusted ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
A compact, VHP resistant remote particle counter. As part of a facility monitoring solution, the IsoAir® Pro-E Remote Particle Counter from Particle Measuring Systems (PMS) is an effective piece of a Contamination Control Strategy using the latest technologies to streamline cleanroom monitoring while meeting global regulations including EU GMP Annex 1, ISO 14644-2, and part of a 21CFR Part 11 ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-3000C environmental quality monitoring system can continuously online monitor related parameters, including particulate matter concentration, temperature, pressure, humidity, wind direction, wind speed, noise and calculate air quality as well as total particulate matter for effective management of measured data. The system is an online particulate matter TSP monitor system, realizing ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5 series is a simple modularization system and auxiliary system of air quality continuous monitoring based on compact outdoor temperature control system. The temperature control is designed for the entire monitoring system. It can be configured with a variety of monitoring factors which is in accordance with Chinese and USA EPA standard measurement principle including 03, 802, NOx, CO and voe, ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Most sensitive model: This unit offers our lowest detection limits with a standard 17 meter sample path. Depending on your application, the path length may be increased up to 22 meters for a 20% improvement in detection ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This extremely popular, outdoor rated continuous duty air sampling system is intended for secure outdoor ambient particulate and/or gaseous air sampling. The pump, control valve, and control panel are all hard mounted in a heavy gauge TIG welded aluminum, fully lockable, fan cooled, weather proof enclosure. The control panel houses the power switch, fuse protection, resettable electronic timer ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-507 is a CO2, PM2.5, PM10 and Ammonia multi-gas detector designed for indoor agriculture applications like poultry farms. Large easy-to-read display and audible alarm for high CO2 levels included. Built-in data logging allows all information to be recorded on a removeable SD card for data analysis. ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
According to US EPA IO - 3.3 standard method of heavy metals, PMMS – 5000 uses XRF nondestructive testing technology and atmospheric automatic enrichment technology to realize the accurate measurementof atmosphere heavy metals such as lead, mercury, cadmium, chromium, arsenic, etc. It is widely used in environmental air quality monitoring place such as industrial pollution area, residential ...
-
PremiumManufactured by Cloud Tech Pvt. Ltd.based in INDIA
Cloudtech is one of the renowned Mist Gun and Anti Smog Gun Manufacturers & Suppliers. The world of big and large cities seems glamorous from outside but however the sight you have within might be so hazy and obscure that you can’t even see the horizon. This might be because of the smoke or the fog which is nonetheless called as ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model 108 dilutes an introduced sample gas in a 1:10 (standard), or a 1:100 (optional) dilution rate to allow the linear measurement of hydrocarbon concentrations above several thousand ppm up to 10% and above. The sample injection method is used in this 190 deg.C heated sample diluter for fast response and improved zero and span stability of a hydrocarbon measurements. The Model 108 is also ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
To remove humidity from the sample. 120 cm, 120 + 60 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
For fast greasing of the collection substrates. Stencil not included. Hazardous material, needs special ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
A two liter per minute inlet allows you to push your PM2.5 limits of detection lower with a higher flow ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you