Particulate Applications available in Azerbaijan
-
Premium
Water and Wastewater Treatment Systems for Laundry and Dry Cleaning
In this period when people work intensively, there is always an increase in laundry and dry cleaning services. Laundry and Dry Cleaning Systems, which will enable you to reach the required capacity and serve people in a cleaner, higher quality and faster way, will help you to ensure that the water you need to draw into your machines is always clean and does not damage the clothes. ...
By ZetaÅŸ Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Premium
Emissions Monitoring for Cement Plants
Opsis provides state-of-the-art monitoring equipment, fully meeting the high standards of monitoring performance and reliability that the cement industry requires. The Opsis in situ systems are designed to withstand environments with high particulate levels and high ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air Quality and Noise Monitoring for Roadside Traffic
Vehicular emissions are the major sources of urban pollution and also affect about 55% of the total human population. The emissions from motor vehicles contribute to hazardous pollutants like nitrogen dioxide, carbon monoxide, and suspended particulate matter. These pollutants cause respiratory diseases and increase the chances of life-threatening diseases amongst the ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
By ENVEA based in Poissy, FRANCE.
-
Premium
Emission control solutions for biomass and coal combustion sector
Burning biomass and or coal releases particulate matter (PM) to the atmosphere, polluting the surroundings and harming the human health. PM emissions is a common problem in industries that operate furnaces or boilers to generate heat or steam for their processes or for electricity generation to be sold to the grid. The general arrangement of a biomass or coal combustion plant includes a cyclone pre-separator to reduce the concentration of particles after the boiler and a final dedusting ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Process Flue Gas Monitoring for Combustion Optimization Application
Combustion in boilers, gas turbines, waste to energy, paper-mills, minerals, etc. | MIR 9000e Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Air pollution, emission and process monitoring systems for CEM solutions
With decades of industrial experience, our systems are designed and developed as a complete turnkey solution. From sample extraction, through analysis, data acquisition and report management, each system is configured to comply with the normative demands and technical constraints of our clients, specific to their ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Emission control solutions for pyrolisis, incineration and gasification sector
Thermal decomposition processes (TD Processes), such as Pyrolisis, Incineration and Gasification are increasingly related with carbon capture, originated from several sources, from RDF to Biomass. CO2 is not solid and thereby it is impossible for it to be captured or filtered. However, several technologies are emerging for the conversion of biomass to fuels and thereby storing CO2 on a solid form. Bioenergy with carbon capture and storage (so called BECCS) is the process of using biomass, such as trees, crops, or ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Particulate Monitoring
The Opsis SM200 is a combined particulate monitor that can be used for both automatic measurement and filter sampling. It uses 47 mm filters for sampling and beta attenuation of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air pollution control for the composite & carbon fiber industry
Ensure Worker Safety and Reduce Production Costs. Anguil’s engineering expertise and reliable environmental solutions can reduce the cost of manufacturing and keep pollutants from reaching workers or the community. ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
On-line gas, particulate analyzers, flow monitors, data acquisition for chemical industry
Our innovative measuring technology makes your plant even more competitive! The aim is to ensure quality during the manufacturing process, to improve the safety of the plant and to increase environmental protection. In the last years, we have been able to improve the processes with our technologies in a wide range of chemical applications with our experience. Our online operating systems are maintenance-free and operate reliably with almost all bulk solids. No matter whether abrasive, corrosive or otherwise ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Monitors, gas analyzers solutions for ISO 22716 solutions for cosmetics & personal care
Providing you with a complete spectrum of contamination monitoring solutions. The Cosmetics and Personal Care manufacturing industry is required to meet ISO 22716:2007 and worldwide GMP Standards for hygienic production and contamination control. This includes monitoring viable and non viable contamination that could impact the safety and quality of your products. Particle Measuring Systems brings in-depth knowledge of manufacturing processes and regulatory codes, such as ISO 22716, to Cosmetics and Personal Care ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Particulate matter monitoring at CHPG in Monaco
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Waste Incineration Application Note
Waste incineration is commonly used to dispose of the organic components of both domestic refuse and hazardous waste by burning it under controlled conditions. The heat generated in this process can be used to generate electricity, a process known as Waste-To-Energy (WTE). Because they have the potential to release highly toxic chemicals, such as polyaromatic hydrocarbons (PAH) and heavy metals, waste incinerators are subject to stringent environmental regulations.Temperature and emissions monitoring equipment ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Erosion and dust control solutions for mine tailings dust control sector
Envirotac line of polymers have been assisting mines reduce airborne particulate matter for over 25 years. Used on tailings, Envirotac will create a tough layer of protection that will laminate soil particles in place. We have had singular applications that have been effective for over 5 ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
By ENVEA based in Poissy, FRANCE.
-
Premium
Ambient air quality monitoring solutions for PM2.5/PM10 particulate monitoring
OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time. The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH and ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air pollution monitoring solutions for communities sector
Monitoring PM and NO2 for communities. Data-driven, people-Powered: Air pollution monitoring should be accessible to whoever needs it. Clarity supports community groups and researchers with the technology and expertise necessary to deploy citizen monitoring networks representative of the air people are breathing: Designated air quality expert supports design and deployment. Remote data accuracy calibration when colocations are available. Academic and community discount ...
By Clarity Movement Co. based in Berkeley, CALIFORNIA (USA).
-
Premium
Continuous Emissions Monitoring System (CEMS) for Determination of a Gas
Continuous emission monitoring system (CEMS) is the total equipment necessary for the determination of a gas or particulate matter concentration or emission rate using pollutant analyzer measurements and a conversion equation, graph, or computer program to produce results in units of the applicable emission and transmit the information to the Continuous Emission Monitoring system. ...
By Enviro Solutions Technology Co.,Ltd based in Wuhan, CHINA.
-
Premium
EHS Air Quality Monitoring for Industrial Compliances
Today, many industrial activities have significant environmental aspects. These aspects have environmental impacts that seldom create irreversible damage to mother nature. Lack of process control, irregular maintenance, or over-burdened design considerations give rise to many environmental violations. Air pollution is one key element that is often challenging for the organization to deal with. The absence of real-time air monitoring delays corrective actions and hence, affects the industry’s vision of ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you