Particulate Equipment available in Saskatchewan

Available in Saskatchewan| Near Saskatchewan
416 Results found

We couldn't find any results in Saskatchewan

Here is a list of results available in Saskatchewan

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Particulate ×

  • Available in: Canada ×

  • Available in: Saskatchewan ×

Sentry Air Systems - Model 300-RND-PFS - Model 300 Roundaire

by Sentry Air Systems, Inc.     based in Cypress, TEXAS (USA)

The Model 300 Roundaire cleanable mobile fume extractor is designed to protect the operator’s breathing zone from harmful airborne fumes and particulates found in many industrial settings. Capable of providing up to 400 CFM of air volume this system ensures pollutants are arrested at the source. This system is equipped with a round, cleanable and ...

ESP to Fabric Filter Conversion System

by Marsulex Environmental Technologies (MET)     based in Lebanon, PENNSYLVANIA (USA)

Buell APC and MET together form one of the strongest ESP-to-FF conversion teams in the industry. Not only can we design a Fabric Filter system that will increase your plant's particulate control, but we can help you determine if your casing is a good candidate for conversion by verifying :

Lundberg E-Tube - Wet Electrostatic Precipitators (ESP)

by A. H. LUNDBERG ASSOCIATES, INC.     based in Bellevue, WASHINGTON (USA)

The collection of fine particulate emissions is often one of the most difficult environmental control problems faced by industry. These sub-micron particles present a significant threat to human health and are one of the leading causes of visibility degradation. A Lundberg Geoenergy Wet Electrostatic Precipitator can be a cost effective way ...

Model ABT-2001 - Laser Particle Size Analyzer

by Angstrom Advanced Inc.     based in Braintree, MASSACHUSETTS (USA)

ABT-2001 Laser Particle Size Analyzer is a high-performance particle size analysis system incorporating modes for measuring both dry and liquid samples. This unit features easy operation, fast testing speeds, high accuracy and excellent repeatability. ABT-2001 is widely applicable for particle size analysis in production industries such as cement ...

LaserHawk - Model 360 Series - Particulate Matter Monitor

by Teledyne Monitor Labs, Inc.     based in Englewood, COLORADO (USA)

For continuous particulate monitors. A complete system includes an optical head, purge system, enhanced remote panel fulfilling all QA/QC requirements. The optical head is built of heavy gauge aluminum parts and finished with acid-resistant enamel paint. All exposed hardware is stainless steel. The rugged design and extremely low heat generation ...

Sterlitech - Silver Membranes Filters

by Sterlitech Corporation     based in Kent, WASHINGTON (USA)

Sterlitech Silver Metal Filter Membranes are pure metallic silver (99.97% pure silver) and are available with particle retention ratings of 0.2 to 5.0 microns. Silver metal membrane cells are used in a variety of filtration applications, and their ability to withstand extreme chemical and thermal stress makes them ideal for applications involving ...

Model DC2000CE - Compact Real-Time Monitor for Particulate Matter

by EcoChem Analytics     based in League City, TEXAS (USA)

The calibration of the compact Diffusion Charger can be done by simultaneous measurements with other particle-measuring instruments (e.g. the SMPS). The calibration is site-specific.

Ahlstrom - Model XAIR - Automotive and Heavy Duty Air Filter Media

by Ahlstrom Filtration     based in Tampere, FINLAND

Ahlstrom XAIR is a new portfolio of Automotive and Heavy Duty Air Filter media.  Product is achieving exceptional performances in soot filtration and dust holding capacity when compared to standard proudcts.

Dry Electrostatic Precipitator for Particulate Control

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

B&W MEGTEC’s dry electrostatic precipitator (ESP) combines the advantages of maximum particulate control and collection efficiency with low operating and maintenance costs. In addition to a proven record of performance and reliability, our dry ESP offers many distinct advantages.

Ecotech - Model MegaVol 3000 - Dust Sampler

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The MegaVol 3000 particulate sampler performs remote unattended sampling of particulates and is ideal for heavy metal and radiation exposure monitoring.

Better Weigh - Continuous Weigh Feeders

by Metalfab, Inc.     based in Vernon, NEW JERSEY (USA)

Continuous Weigh Feeders For highly accurate, gravimetric feeding of dry bulk materials in batch or continuous operation. Better-Weigh®' Batch/Continuous Weigh Feeders are designed to provide feeding in either batch or continuous mode depending upon the arrangement of the feeder's control electronics. In batch mode, the batch controller is ...

Aurora - Model 1000 - Integrating Nephelometer

by American Ecotech LLC     based in Warren, RHODE ISLAND (USA)

User friendly, easy to use and maintain, the Aurora 1000 lowers the cost of ownership for aerosol light scattering, visibility and particulate monitoring instrumentation. The Aurora 1000 uses a single wavelength for scattering coefficient visibility measurements at one of three user specified wavelengths. Ecotech, through collaboration with ...

Model SM 500 - Suspended Particulate Analyzer

by Wöhler     based in Bad Wünnenberg, GERMANY

The world's first multi-functional analyzer for onsite mass concentration measurements of total suspended particulate matter in flue gas, O2 and CO, draft and stack temperature. The Wöhler SM 500 analyzer will give you immediate readings. Laboratory based analysis becomes superfluous.  The all new TUV certified technology allows onsite ...

Moisture Particulate Removal Vessel

by Unison Solutions, Inc.     based in Dubuque, IOWA (USA)

Unison’s moisture/particulate removal vessels are built to last.  The vessels are all 304L stainless steel and designed per ASME Section VIII, DIV. 1.  The 3 micron particulate system is our standard, but we have multiple sizes available to match your specifications.

Westech - Model M9096 - Particulate Sampling Train

by Westech Scientific Instruments (Westech)     based in Upper Stondon, UNITED KINGDOM

The M9096 In-Stack Manual Method Particulate Sampler for ISO9096, EN13284-1, US EPA Method 17

Model CMS2000 Mk6 - Alpha/Beta Particulate Monitoring System

by Lab Impex Systems     based in Poole, UNITED KINGDOM

The CMS 2000AB Mk6 is an advanced aerosol monitoring system offering unprecedented performance in terms of alarm response, detectable limits and result quality. Using solid state detector technology, the CMS 2000 provides optimised radon/thoron rejection via spectrometric techniques and gamma rejection. The stainless steel air inlet combined with ...

Ecotech - Model ACS1000 - Aerosol Conditioning System

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Studying the hygroscopic properties of aerosol particles offers insights into their effect on the earth’s radiative balance. By simultaneously exposing aerosol particles to different relative humidity, Ecotech’s Aerosol Conditioning System (ACS 1000) enables the effect of water uptake on the particles’ physical properties to be ...

DURAG - Model F-701-20 - Ambient Air Particulate Monitor

by DURAG GmbH     based in Hamburg, GERMANY

Ambient air particulate monitor to detect TSP, PM10 or PM2.5 in ambient air for use in industrial or governmental ambient air monitoring networks.

PCME - Model STACK 980 - Particulate Continuous Emission Monitor

by PCME Ltd     based in St Ives, UNITED KINGDOM

The PCME STACK 980 is an approved Particulate Continuous Emission Monitor suited to industrial applications in stacks after bag filters, cartridge filters, cyclones and process driers. The instrument combines the latest regulatory approvals (MCERTS Performance Standards for Automated Dust Arrestment-Plant Monitors, version 1 (August 2010), class 2 ...

Bekaert - Closed Diesel Particulate Filter for Passive Regeneration

by Bekaert Group     based in Zwevegem, BELGIUM

Efficient, tunable, adaptable, metal filter medium for Diesel Particulate Filter. A low weight solution. A plug and play solution standing for lower assembly costs. The closed filter concept guarantees compatibility with current and future legislation. Reference tests prove: at FEV and at Flanders Drive. This means time and costs reduction of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you