Gas Monitoring (Particulate) Equipment
-
Manufactured by RTS Instruments Srlbased in ITALY
Usually this refers to radioactive isotopes of noble gases, but may also concern radioactive isotopes of other gases. This is another type of radioactive contamination of air, not due to particulates. The task is to detect and measure this contamination and, eventually, identify the ...
-
Manufactured by Xian Juneng Instrument Co., LTDbased in CHINA
TR-9300 flue gas continuous monitoring system is a combination of on-line analysis technology and China environmental protection monitoring technology, and is elaborately built through our company's rich experience in the field of industrial process for many years. The system conforms to the environmental protection industry standard HJ / ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Flue gas emissions should be monitored on a continuous basis to ensure that final emissions constantly comply with the applicable regulations. A Continuous Emission Monitoring System (CEMS) permanently measures typical emission parameters e.g. SO2, HCl, NOx, HF, CO, O2, H2O, CO2, TOC, particulate matter, opacity and more components. ...
-
Manufactured by Shanghai Chunye Instrument Technology Co., Ltd.based in CHINA
The ag-cems07 flue gas emission continuous monitoring system (CEMS) can monitor the parameters such as SO2, NOx, O2, particulate matter, humidity, pressure, velocity and temperature in the gas.In addition, DAS software (data acquisition and processing system) is used to generate charts, hourly duty reports, daily mean monthly reports, monthly ...
-
Manufactured by Jay Enterprisebased in INDIA
VAYUBODHAN VSS1 Stack Monitoring Kit use for Iso-kinetic Sampling with digital display to monitor stack gas temperature, pressure, stack Velocity, Volumetric flow & particulate sampling under Isokinetic condition. Monitoring of gaseous pollutants such as Sulfur Dioxide (SO2), Nitrogen Dioxide (NO2) & ...
-
Manufactured by Technical Associatesbased in USA
be extended to allow monitoring of hoods, glove boxes, stacks, etc. Time is recorded by an odometer type timer wired into the pump circuit. Portable PET, Iodine, or Tc-99M DTPA Air Monitor for Gas & Particulates. Use in Hospitals, Research Labs, Power Plants, National Labs. High Sensitivity, Constant Check with Alarm and Record capability. ...
-
Manufactured by Qingdao Yingying Environmental Technology Co., Ltd.based in CHINA
The instrument uses the parallel-speed isochronous sampling method of the pitot tube to collect the particulate matter in the exhaust gas of the fixed pollution source, measures the dust quality by the filtration weighing method, and quantitatively measures the smoke component by the fixed potential electrolysis. It can be ...
-
Manufactured by Qingdao Yingying Environmental Technology Co., Ltd.based in CHINA
This instrument is an indispensable instrument carefully developed by our company for collecting pollution sources or samples of harmful gases in the atmosphere. During the development process, the opinions of experts and users were extensively consulted, and the high-tech in the fields of computers, sensors and new materials was applied, which made the sampler small and portable, stable in flow ...
-
Manufactured by Comde-Derenda GmbHbased in GERMANY
The method applied by the APM-2 uses the light scattered by tiny particles (nephelometry) to determine the PM10 or PM2.5 concentration in the ambient air directly and continuously. After performing a qualification test, TÜV Rheinland certified the procedure as equivalent to the customary gravimetric method. The system features an impactor inlet for fractionating the particulate matter, and a ...
-
Manufactured by VF, a.s.based in CZECH REPUBLIC
The CPM-300 monitor is designed to continuously measure the alpha and beta particulates concentration in the air. It displays and archives the measured values and activates the alarm if the pre-set threshold level values are ...
-
Manufactured by VF, a.s.based in CZECH REPUBLIC
The CPM-310 aerosol monitor is intended for collection and measurement of radioactive alpha and beta aerosols on fixed filter. This monitor can be used as a part of large monitoring system as well as an autonomous ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
This out of stack sampler provides reliable sample stability and reduces moisture in the sample. Well suited for high particulate and wet samples, promotes long filter life and can withstand contant exposure in the harshest stack environments, Usable with a wide range of ambient air analyzers, this sampler provides a strong single mounting point adaptable to a variety of port ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
Manufactured by PM Aware- GlobeOwl Incbased in CANADA
Emissions Monitoring: PM 1.0 PM 2.5, PM 10 or Gas Monitoring: H2S, NH3, VOC, CO, Ethylene, Mercaptan, Select any Gas to monitor. One per system included. More available on request. Hardware is fully guaranteed and replaced every 3 years at no charge. Multiple Monitoring Units May Operate ...
-
Manufactured by FEP Technology Limitedbased in CHINA
be used with a continuous flue gas monitoring system (CEMS), or it can be connected to a soot monitoring network individually or multiple units, sharing a set of data collection and processing background. FEP-204 dust meter is an self-developed on-line dust monitoring device, which uses the mainstream technology of laser back ...
-
Manufactured by Nanjing Kelisaike Safety Equipment Co., Ltd.based in CHINA
with a continuous flue gas monitoring system (CEMS), or it can be connected to a soot monitoring network individually or multiple units, sharing a set of data collection and processing background. This product is widely used in thermal power generation, iron and steel metallurgy, petrochemical industry, cement production, ceramics, waste ...
-
Manufactured by Nanjing Zuoyeal Technology Co,.Ltdbased in CHINA
This system consists of a gaseous pollutant monitoring subsystem, a particulate matter monitoring subsystem, a flue gas parameter monitoring subsystem, and a data acquisition and processing subsystem. It can continuously monitor many related parameters such as the flow rate of dense flue gas, ...
-
by ESC Spectrumbased in USA
Process Monitoring Systems bring unique challenges as monitoring locations can be located upstream of control devices in stratified and heavy particulate laden gas streams. Monitoring approaches specifically tailored to meet these challenges must be designed into the system from the outset. Integration of real time ...
-
Manufactured by TSI Incorporatedbased in USA
AirAssure™ IAQ Monitor in combination with TSI Link Solutions™ software are essential to creating, managing, and deploying your IAQ program. The 2-gas AirAssure™ IAQ Monitor measures carbon dioxide (CO2), total volatile organic compounds (tVOC), particulate matter (PM), barometric pressure, temperature and relative humidity. Every ...
-
based in USA
The Emission Monitoring System (EMS-10™) is a fully automated FTIR-based gas and emission monitoring system. The EMS-10 is capable of accurately analyzing many compounds simultaneously at high spectral resolution. The elegant integrated design incorporates complete control of all gases including the sample stream, zero gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you