particulate analyzer Equipment available in Zambia

Available in Zambia| Near Zambia
30 Results found

We couldn't find any particulate analyzer equipment in Zambia

Here is a list of results available in Zambia

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Subcategory: Particulate ×

  • Keyword: particulate analyzer ×

  • Available in: Africa ×

  • Available in: Zambia ×

Model SM 500 - Suspended Particulate Analyzer

by Wöhler     based in Bad Wünnenberg, GERMANY

The world's first multi-functional analyzer for onsite mass concentration measurements of total suspended particulate matter in flue gas, O2 and CO, draft and stack temperature. The Wöhler SM 500 analyzer will give you immediate readings. Laboratory based analysis becomes superfluous.  The all new TUV certified technology allows onsite ...

Model KSP-I-2000 - Wall Mount Particulate Analyzer

by Beijing Care Corporation Ltd.     based in Beijing, CHINA

Considering of the customer’s requirements and all kinds of working conditions, BCC developed KSP-I-2000 continuous wall mount particle analyser with the method of light fluctuation. A clean, low pressure, high volume gas source are fitted to the heads of the purge air system. The gas can pass through the outermost optical surfaces of each ...

Environnement S.A. - Model QAL 181 - Dust Analyzer

by Environnement S.A     based in Poissy, FRANCE

The QAL 181 dust analyzer is suitable for measuring particle emissions after both bagfilter and electrostatic precipitator arrestment plant. The monitor is suitable for measuring both low (0.1mg/m3) and high particulate concentration levels (300mg/m3). TÜV and MCERTS certified.

Environnement S.A. - Model MP101M - Real Time Particulate Monitor

by Environnement S.A     based in Poissy, FRANCE

The standard Beta gauge measurement Method ISO 10473 of the MP101M dust monitor allows, when used with the patented optical technology of the CPM module, the continuous and simultaneous measurement of fine particulates. A unique combination, providing exclusive benefits: Precise beta attenuation monitoring of PM10, PM2.5, PM1 or TSP mass ...

Model PAIS200 - Particulate and Iodine Sampler

by Saphymo     based in Montigny Le Bretonneux, FRANCE

The PAIS 200 is designed to continuously collect Particulates  and Iodines contained in all gaseous effluents. A sample is extracted either in a static atmosphere of a work area, either in a flow of a stack  or a ventilation duct by means of an isokinetic sampling probe. The samples are to be analyzed  in the laboratory.

TA - Model FM-9MA-2 - Alpha & Beta Particulate Air Monitor

by Technical Associates     based in Canoga Park, CALIFORNIA (USA)

The FM-9-MA2 and FM-9-MAB2 Air Monitors utilize a solid state detector and two coordinated single channel analyzer windows. Utilizing two coordinated single channel analyzers the electronics will reject Radon pulses. The sample window (PHA allows the user to preset specific energy level for sample (eg. The “Radium A” peak), measuring ...

THERMOX - Model CEM O2 /TM - Trace Oxygen Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

Flow-insensitive sample design, suitable for sample streams with condensables and particulate.

Model FH 62 C14 - Continuous Particulate Monitor

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

Advanced FH62 systems provide continuous automatic, real-time ambinet particulate measurement and are ideal for air quality measurement and for air quality networks. They can be configured for TSP, PM10, and PM2.5 sampling. Extremely accurate and insensitive to vibration, they are the only beta gauges with a truely continuous 60-minute to ...

Dichotomous - Model PM10/2.5 - Sampler

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

The manual dichotomous sampler is used for routine compliance montoring for PM10 and PM2.5. The Dichotomous sampler operates at a flow rate of 1 CHM (16.7 LPM) and is available with built-in mechanical 6-day or 7-day times, or an electronic digital programmable timer.

Model 5012 - Multi Angle Absorption Photometer

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

The Model 5012 MAAP measures the aerosol-related absorption of light and the corresponding atmospheric black carbon mass concentration. Continuous data is provided by a multiple detector setup to simultaneously measure the transmitted and the scattered light from a particle-loaded filter. Typical applications include determining ambient ...

Model 2000 - Partisol FRM

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

The Partisol-FRM Model 2000 Air Sampler is USEPA reference method designated for both PM-2.5 and PM-10. It is the proven manual sampling platform for the USEPA PM-2.5 standard. It is based upon the original Partisol Air Sampler, which received the USEPA reference designation for PM-10 measurements in June 1994.

Palas - Model 2050 / 2100 / 2200 - Universal Scanning Mobility Particle Sizer (U-SMPS) / Particulate Monitoring

by Palas GmbH     based in Karlsruhe, GERMANY

The Palas universal scanning mobility particle sizer (U-SMPS) is available in two versions. The long classifying column (2050/2100/2200 model) is able to reliably determine particle size distributions of 8 to 1,400 nm. The Palas U-SMPS system includes a classifier [defined in ISO 15900 as a differential electrical mobility ...

TA - Model RAWA-GP & RAWA-BGP - Gamma, Silt & Particulate Monitor for Raw Water & Waste Water

by Technical Associates     based in Canoga Park, CALIFORNIA (USA)

Model RAWA-GP is a single detector water monitor /controller for measuring Gamma emitting radionuclides in RAW WATER. Model RAWA-BGP is a dual detector water monitor measuring both Beta and Gamma contamination in RAW WATER. The electronics are microprocessor with a full color monitor. The system is modular allowing changes or additions of ...

Model DMS-200 - Particulate Matter Monitoring, Dust Monitor

by HANGZHOU ZETIAN TECHNOLOGY CO., LTD     based in Hangzhou, CHINA

Different from DMS-100, DMS-200 is installed on the probe, access to the flue pipe through the probe directly to realize flue dust measurement, so it is possible to achieve very low detection limits. It is widely used in dust monitor of thermal power generation and other ultra-low emissions industries.Features- 0.1mg/m3 low detection limit meets ...

Model LSPM10 - Airborne Particulate Continuous Monitor and Sampler

by UniTec Srl     based in Ferrara, ITALY

Model LSPM10 is an instrument designed for the continuous monitoring of particulate, using the principle of orthogonal nephelometry. A constant flow controlled pump draws ambient air through the size selective sampling head of choice (PM10 or PM2.5) into the instrument, where particle concentration is derived by measuring the light scattered from ...

Model 300 - Diluting Stack Sampler

by Thermo Scientific - Air Quality Instruments     based in Franklin, MASSACHUSETTS (USA)

Diluting Stack Probe Model EPM.300 Series performs four critical functions to prepare a sample from the stack (sample delivery, course filtering, fine filtering, and sample dilution).Dilution Probes are proven performers with low maintenance requirements in the field and a long life on the stack.The system uses an air driven aspirator which ...

Model 1143 - Micro Filter Analyzer

by Emcee Electronics Inc     based in Venice, FLORIDA (USA)

This test method is intended for use in the laboratory or field in evaluating distillate fuel cleanliness.  A change in filtration performance after storage, pretreatment, or commingling can be indicative of changes in fuel condition. Causes of poor filterability in industrial/refinery filters include fuel degradation products, contaminants ...

Mastersizer - Model 2000 - Particle Size Analyzer

by Malvern Instruments Ltd.     based in Worcestershire, UNITED KINGDOM

The Mastersizer 2000 particle size analyzer has set the standard for simple, straightforward operation. Modular in design, it has a wide range of automated sample dispersion units for the measurement of wet and dry samples. These are controlled through SOPs, providing ease of method development and transfer.

Malvern Instruments - Model 2000 - Particle Size Analyzer

by Akribis Scientific Ltd     based in Pickmere, UNITED KINGDOM

The Mastersizer 2000 particle size analyzer has set the standard for simple, straightforward operation. Modular in design, it has a wide range of automated sample dispersion units for the measurement of wet and dry samples. These are controlled through SOPs, providing ease of method development and transfer.

Mastersizer - Model 3000 - Laser Diffraction Particle Size Analyzer

by Malvern Instruments Ltd.     based in Worcestershire, UNITED KINGDOM

The Mastersizer 3000 laser diffraction particle size analyzer delivers rapid, accurate particle size distributions for both wet and dry dispersions with the minimum of effort. Measuring over the nanometer to millimeter particle size ranges, it packs exceptional performance into the smallest of footprints, bringing operator-independent measurements ...

Need help finding the right suppliers?

Let the XPRTs do the work for you