PM10 (Particulate) Equipment Available In Saskatchewan
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM10 monitor version of OPSIS’ SM200 particulate monitor provides accurate and reliable automatic measurements of PM10 particulate fraction concentrations in ambient air, as well as sampling of the PM10 particulate fraction for subsequent manual ...
-
PremiumManufactured by ENVEAbased in FRANCE
The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site ...
-
Manufactured by Everise Technology Ltd.based in CHINA
Adopting βray method, EVPM200 is characteristic of good performance when running independently. The radiation source is well sealed, with very low ...
-
Manufactured by Thermo Scientific - Air Quality Instrumentsbased in USA
The manual dichotomous sampler is used for routine compliance montoring for PM10 and PM2.5. The Dichotomous sampler operates at a flow rate of 1 CHM (16.7 LPM) and is available with built-in mechanical 6-day or 7-day times, or an electronic digital programmable ...
-
Manufactured by Tisch Environmental Incbased in USA
PM-10 High Volume Monitor: Complete with Size selective inlet, outdoor anodized aluminum shelter, aluminum blower motor assembly, 8' x 10' stainless steel filter holder, mass flow controller with 20/60 scfm flow probe,7-day mechanical timer, elapsed time indicator, continuous flow/pressure recorder, and filter media holder/filter paper cartridge (110v/60hz or ...
-
Manufactured by PM Aware- GlobeOwl Incbased in CANADA
Emissions Monitoring: PM 1.0 PM 2.5, PM 10 or Gas Monitoring: H2S, NH3, VOC, CO, Ethylene, Mercaptan, Select any Gas to monitor. One per system included. More available on request. Hardware is fully guaranteed and replaced every 3 years at no charge. Multiple Monitoring Units May Operate ...
-
Manufactured by Environmental Solutionsbased in INDIA
This sampler technology is developed, patented & tested by CSIR-National Physical Laboratory, New ...
-
Manufactured by BLATN Science & Technology (Beijing) Co., Ltdbased in CHINA
. The advanced core technology adopts high precision import sensor, the sensor drift error is the lowest in the industry, through the patented algorithm can eventually accurately distinguish virus-level particulate matter. SMART series can detect a variety of pollutants, including PM2.5, PM10, formaldehyde, VOCS , CO2 etc. More set up a professional ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified ...
-
Manufactured by Tisch Environmental Incbased in USA
Volumetric Flow Controlled Total Suspended Particulate TSP High Volume Air Sampling System. Includes anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous/flow pressure recorder, elapsed time indicator, 30' manometer, volumetric flow controller with look up table,7 day timer. 110v/60 hz or 220 ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled Total Suspended Particulate TSP High Volume Air Sampling System. Includes anodized aluminum shelter, 8" x 10" stainless steel filter holder with probe hole, aluminum blower motor assembly, continuous/flow pressure recorder, elapsed time indicator, mass flow controller w/20-60 SCFM air flow probe, and 7-day mechanical ...
-
Manufactured by Tisch Environmental Incbased in USA
The series TE-230 provides a simple, accurate, and yet low-cost means of obtaining the particle size distribution and respirable mass fraction of suspended particulates in outdoor and occupational environments. The unique slotted impactor design features the ultimate in precision, predictability, and sharpness of cut-off, combined with compactness, ease-of-use, and the lowest internal ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled Total Suspended Particulate High Volume Air Sampling System Includes: Anodized aluminum shelter, 8' x 10' stainless steel filter holder with probe hole, aluminum blower motor assembly, continuous flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow probe and digital timer with digital elapsed time indicator (110V/50hz ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM 10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47-mm ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5 air quality continuous online automatic monitoring system can real-time monitor concentration changes of SO2, NOx, O3, CO, particulate matter(PM2.5,PM10) and other conventional pollution factor. It can be integrated with serosols, VOCs, NH3, and halide(HF/HCL) according to customer's needs. Combined with the five-parameter ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical ...
-
PremiumManufactured by Ecomesurebased in FRANCE
Ambient air quality is one of the major environmental and health challenges facing our communities. Regulatory limits for nitrogen dioxide (NO2) and particulate matter (PM2.5, PM10) are frequently exceeded in urban areas. Vehicle emissions are the biggest culprit, but there are plenty of other sources. Heating systems, production ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you