PM10 Particulate Monitoring Equipment For Air And Climate Available In Kuwait
-
Showcasebased in USA
Clarity’s flagship particulate matter (PM) and nitrogen dioxide (NO2) monitor is self-powered, FCC/CE certified, UV-resistant, and weatherproof. A truly self-sufficient IoT air quality monitoring system with solar harvesting, internal battery, and global cellular communications, the Clarity Node-S accommodates site-specific requirements according to the customer’s needs, not the other ...
-
ShowcaseManufactured by Cloud Tech Pvt. Ltd.based in INDIA
Cloud Tech Dust Suppression System brings state-of-the-art technology to the difficult and costly task of controlling dust at manufacturing, industrial and agricultural sites. It produces a ultra-fine water fog that effectively attracts and holds dust particles so that they can be more readily removed from the work place and other environmentally sensitive ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 pm 2.5 measurement device with high accuracy, reliability, stability and economy. Our PM monitor can measure PM10, ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The new XC-53 from Apex Instruments is designed as a cost-effective entry-level metering console for isokinetic sampling. The console features our advanced Peak 32 microcontroller module (MCM) for measuring and displaying stable pressures and temperatures. The transflective LCD screen displays the elapsed time, the pitot velocity pressure (?P), the venturi sample flow pressure (?H) and the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-6 Micro Air Monitoring System is a small online environmental monitoring system based on high precision(ppb level) gas sensor. It provides flexiable sensor combination scheme and modular design, as well as online monitoring of PM10,PM2.5,SO2,NO2,O3,CO,VOCs,temperature, humidity and other factors in the atmosphere. Special factors can also be qulckly configured according to the actual ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
A two liter per minute inlet allows you to push your PM2.5 limits of detection lower with a higher flow ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Enables heating of the Dekat® PM10 Impactor up to 200 ...
-
PremiumManufactured by Environmental Products & Applications, Inc.based in USA
Envirotac All Weather (AW) survives the elements. Envirotac AW consists of environmentally safe chemicals which work on principles of nano technology. The acrylic co-polymer creates nano composites within the soil fabrics and modifies the soils micro-structures. This increases the interconnection between the soil particles producing a homogenous and isotropic material. Increasing load bearing ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
These High Volume Air Samplers are housed in a clear-anodized aluminum outdoor shelter. The Brushless, two or three stage centrifugal fan blower can be used for particulate sampling with either a 4” diameter or 8” x 10” filter paper holder. The blower motor has a variable speed control feature which allows the operator to select a flow rate up to the capacity of the pump. Select ...
-
PremiumManufactured by ENVEAbased in FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible physicochemical laboratory ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-5000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a maintenance free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed maintenance-free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm ac. to EN ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The PM2.5 monitor version of OPSIS’ SM200 particulate monitor offers accurate and reliable automatic measurements of PM2.5 particulate fraction concentrations in ambient air, and sampling of the PM2.5 particulate fraction for later manual ...
-
PremiumManufactured by Innovation nilu ASbased in NORWAY
NDL4 is the fourth generation of NILU data loggers and the accumulation of 35 years of experience in data logger development. NDL4 communicates digitally with the analyzer which makes it possible to collect both measurement data and status parameters. The status parameters give important information about the condition of the analyzer, such as gas flow rates, pump vacuum, etc. A number of ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Temperature controller for operating the heating jacket (PH-2023 or ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
To remove humidity from the sample. 120 cm, 120 + 60 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dedicated to the measurement of regulated pollutants such as ozone (O3), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen oxides (NO- NO2 and NOx), and particulates PM10 and PM2.5, the e-Series of analysers, has been designed with a special consideration to the environmental impacts of the product during its whole ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company’s High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot negotiate the air stream turn, thereby colliding ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
PM2.5 is monitored worldwide for ambient and personal exposure to harmful ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you