PM10 Particulate Monitoring Equipment For Air And Climate Available In Laos
-
ShowcaseManufactured by Cloud Tech Pvt. Ltd.based in INDIA
Cloud Tech Dust Suppression System brings state-of-the-art technology to the difficult and costly task of controlling dust at manufacturing, industrial and agricultural sites. It produces a ultra-fine water fog that effectively attracts and holds dust particles so that they can be more readily removed from the work place and other environmentally sensitive ...
-
Showcasebased in USA
Clarity’s flagship particulate matter (PM) and nitrogen dioxide (NO2) monitor is self-powered, FCC/CE certified, UV-resistant, and weatherproof. A truly self-sufficient IoT air quality monitoring system with solar harvesting, internal battery, and global cellular communications, the Clarity Node-S accommodates site-specific requirements according to the customer’s needs, not the other ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
The sampler that started it all. This lightweight, nearly silent, 240 gram sampler collects airborne particulate matter on a 37 mm filter with continuously monitored volumetric flow. Each sampling run is accompanied by a log file that reports hardware performance and environmental information. With millions of hours sampled on these devices they have become the favorite of exposure scientists, ...
-
PremiumManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm in acc. with EN 12341. Automatic switching to sequentially admit up to 16 ...
-
PremiumManufactured by ENVEAbased in FRANCE
The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace exposure monitoring, utilizing the high range and low range sensors to detect and track particulate exposure limits and limit violations. Health and safety personnel can use the measurement data to provide a safe working environment and report site ...
-
PremiumManufactured by Elvatech Ltd.based in UKRAINE
PmX-5050 is a fully stand-alone device for continuous analysis of particulate matter (PM) elemental composition, intended for online elemental analysis of heavy metals in the ambient air. Particulate matter’s presence in the air and its overall accumulation in the environment are the subjects of growing public concern, especially in the manufacturing facilities, plants, and factories ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Inhalable particle content is one of the most important indexes for measuring air quality. Combining years of experience in developing environment and safety monitoring instruments as well as the latest demand at home and abroad, our company has launched a new generation DPM-6000 pm 2.5 measurement device with high accuracy, reliability, stability and economy. Our PM monitor can measure PM10, ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Temperature controller for operating the heating jacket (PH-2023 or ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The GasLab Plus CM-510 is a Multi-Gas Meter designed to measure multiple gas concentrations in a wide range of industries and applications. With long-term data storage, the user can measure ambient gas levels by data displayed and gain indication by visual and audible alarm settings. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
PM10 inlet for ambient air measurements. EN 12341 PM10 inlet downscaled to 10 ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company’s High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot negotiate the air stream turn, thereby colliding ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
A two liter per minute inlet allows you to push your PM2.5 limits of detection lower with a higher flow ...
-
PremiumManufactured by Environmental Products & Applications, Inc.based in USA
Earth Glue is an environmentally friendly acrylic polymer. It is added to water and when applied it will penetrate the soils and bond them together creating a tough layer of protection. Earth Glue is a recycled product from the polymer industry that has been reworked to serve the dust control and soil stabilization sectors. It will outperform salt based and lignin products traditionally used for ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
PremiumManufactured by ENVEAbased in FRANCE
PM10, PM2.5 and PM1 fine dust concentration measurement in the range 0-10,000 μg/m3 using the Standard Reference Method. The MP101M particulate analyzer uses the standard ISO 10473 beta gauge measurement method for the continuous measurement of the concentration of fine dust in ambient air. The instrument is certified equivalent to the reference method in accordance with the EN12341 European ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
According to US EPA IO - 3.3 standard method of heavy metals, PMMS – 5000 uses XRF nondestructive testing technology and atmospheric automatic enrichment technology to realize the accurate measurementof atmosphere heavy metals such as lead, mercury, cadmium, chromium, arsenic, etc. It is widely used in environmental air quality monitoring place such as industrial pollution area, residential ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI’s Xact® 625i is designed for high time resolution multi-metals monitoring of ambient air, with detection limits that rival those of laboratory analysis. The Xact® 625i comes standard with a solid-state meteorological sensor and SCI’s proprietary ADAPT analysis package, making the instrument one of the most powerful air pollution source detection offerings in the ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
PM2.5 is monitored worldwide for ambient and personal exposure to harmful ...
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. Thanks to its robust and miniature design, it is fully ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you