PM10 Particulate Monitoring Equipment For Air And Climate In North Carolina
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PTFE-coated glass fiber filters are constructed from borosilicate microfibers and bonded with PTFE. The filters can be folded and handled without loss of fibers. Specifically recommended for Method 26, PM10, and PM2.5 sampling. Great for especially low loading rates and low absorption of acid gases such as SOx or NOx with at least 99.95% retention efficiency (0.3 μm DOP). ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The XC-502 is an all-in-one digital isokinetic source sampler that offers numerous features to increase convenience and efficiency for stack testers. The latest installation in the Apex Instruments Peak 32 series, the XD-502 is powered by the PIC32 microcontroller module and features a sunlight-readable backlit ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM 10/PM2.5 Set combines the in-stack measurement of particulate matter (PM) equal to or less than an aerodynamic diameter of nominally 10 (PM10) and 2.5 (PM2.5 ) microns from stationary sources. The sampling train and operation are identical to Method 201A except that the PM2.5 cyclone is inserted between the PM10 cyclone and the 47-mm filter. The PM10 cyclone collects particulate matter ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The new XC-53 from Apex Instruments is designed as a cost-effective entry-level metering console for isokinetic sampling. The console features our advanced Peak 32 microcontroller module (MCM) for measuring and displaying stable pressures and temperatures. The transflective LCD screen displays the elapsed time, the pitot velocity pressure (?P), the venturi sample flow pressure (?H) and the ...
-
Manufactured by Bucher Municipal AGbased in SWITZERLAND
The heavy-duty cleaning powerhouse thas has been continuously improved to meet customer requirements. With sweepers tailored to operate in many specific environments, Bucher offers a wide choice of products and options, which ensures maximum performance is always achieved. Through years of experience in sweeper design, Bucher has developed a unique system that creates a cyclone effect within the ...
-
Manufactured by Nedermanbased in SWEDEN
The NOM series filters are designed for lathing and milling applications, for machines stamping and pressing steel plates, industrial washing machines, abrasive water jets etc. In all metal fabrication with oil mist troubles, these filters will fit into a ducting system, connected to each machine. All units are equipped with pressure gauge for control of filters as well as an indication for need ...
-
Manufactured by Bucher Municipal AGbased in SWITZERLAND
Mounted to the sub frame, the hydraulically operated sweeping system is designed to prolong brush life and reduce the cost of ownership. Both channel and wide-sweep brush installations feature quick-change mechanisms which reduce downtime between changeovers. All twin-engine VT Range sweepers are powered by a dedicated high performance auxiliary engine. With a heavy-duty, corrosion-resistant ...
-
Manufactured by URG Corporationbased in USA
Anodized Aluminum. 16.7Lpm Flow Rate, 2.5µm Cutpoint. Removable Top for Easy Cleaning. Dimensions: 4.8" x 6.6" x 2.3" (12.2 x 16.8 x 5.8 cm). Weight: 2.1 lb (1 ...
-
Manufactured by URG Corporationbased in USA
Specifications: Operating Flow Rate of 32Lpm. Available Teflon Coated or Anodized. New USEPA Designed Louvered ...
-
Manufactured by Nedermanbased in SWEDEN
The NOM series filters are designed for lathing and milling applications, for machines stamping and pressing steel plates, industrial washing machines, abrasive water jets etc. In all metal fabrication with oil mist troubles, these filters will fit into a ducting system, connected to each machine. All units are equipped with pressure gauge for control of filters as well as an indication for need ...
-
Manufactured by Bucher Municipal AGbased in SWITZERLAND
Power and performance packaged for the city. The V series Truck Mounted Road Sweeper has established itself as one of the most reliable and dependable truck mounted sweeper. The latest V series sweepers have been developed from over 50 years of evolution and continuous improvement to meet customer requirements. With sweepers tailored to operate in many specific environments, we can offer a wide ...
-
Manufactured by American Ecotech LLCbased in USA
The HiVol 3000 particulate sampler performs remote unattended sampling of PM2.5, PM10 or TSP along with basic meteorological parameters. The HiVol 3000 incorporates advanced programming functions and electronic volumetric flow control to maintain a consistent flow and collect a truly representative sample of particulate matter. Optional attachments allow the sampler to measure wind speed and ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled Total Suspended Particulate TSP High Volume Air Sampling System. Includes anodized aluminum shelter, 8" x 10" stainless steel filter holder with probe hole, aluminum blower motor assembly, continuous/flow pressure recorder, elapsed time indicator, mass flow controller w/20-60 SCFM air flow probe, and 7-day mechanical ...
-
Manufactured by Turnkey Instruments Ltdbased in UNITED KINGDOM
DustMate is a hand-held instrument with a very fast response which has been designed to locate sources of workplace airborne dust and fumes even at very low concentrations. Highly effective for checking air quality within buildings. Its one second time resolution also allows it to be used as a road-side indicator to identify high pollution vehicles as they ...
-
Manufactured by American Ecotech LLCbased in USA
At Ambilabs®, we have been designing and installing full turn-key monitoring systems for many years, including equipment deployed throughout the United States and Canada. We have extensive experience working on both small and large ambient air monitoring projects. Starting with the basic addition of an ozone monitor through to a turn-key air quality monitoring station, Ambilabs® has the ...
-
Manufactured by American Ecotech LLCbased in USA
The Airpointer® is a revolutionary, compact, and modular system for air quality monitoring. It is easy to install, cost effective to operate and easy to maintain. Its compact design enables it to be installed almost everywhere. The Airpointer® offers a choice of U.S. EPA Federal Equivalent Method (FEM) analysis modules for monitoring the classic airborne pollutants (SO2, NO2/NOX, CO, O3, ...
-
Manufactured by Tisch Environmental Incbased in USA
DeltaCal is the first and only continuous volumetric flow calibration/audit device which gives a direct indication of volumetric flow rate, standard flow rate, barometric pressure (both mm/Hg & mb), ambient temperature and filter temperature in one instrument. It was developed for use with U.S. EPA PM2.5 designated samplers and their PM10 derivatives. With an accessory adapter it is usable ...
-
Manufactured by Tisch Environmental Incbased in USA
Includes size selective inlet (<10 micron cut size), anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous flow/pressure recorder, solid state digital timer programmer with digital elapsed time indicator, 30' water manometer, volumetric flow controller with look up ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you