Process Emissions Equipment For Air And Climate Available In El Salvador
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000DN is based on a tunable semiconductor laser absorption spectroscopy (TDLAS) technology principle, including three parts: pretreatment, gas analysis module and data processing and display. After dedusting by sampling probe, tracing by heating pipe, the measured gas is analyzed by the hot gas analysis module (TDLAS technique). It is an effective solution to the technical problem that ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
Hygronom is the professional humidity meter used to measure the humidity of flue gas emitted by pollution sources. According to measured humidity, it converts wet gas concentration into dry gas concentration. In addition, the HM-200 precision humidity meter also can be used in industrial online humidity ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GA-5000nao (NH3, NO, O2) is based on a tunable semiconductor laser absorption spectroscopy (TDLAS) and ultraviolet difference absorption spectroscopy (DOAS) technology principle, including three parts: pretreatment, gas analysis module and data processing and display. After dusting by the sampling probe, sampling by heating pipe, the measured gas is analyzed by the hot gas analysis module ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control, and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a particular occasion. After dedusting by sampling probe, tracing by ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Temperature ELPI+ (Electrical Low Pressure Impactor, HT-ELPI+) is a unique version of the Dekati ELPI+ that enables real-time measurement of particle size distribution from 6 nm up to 10 μm with 10 Hz sampling rate. The High Temperature ELPI+ allows direct measurement of up to 180 °C high temperature aerosol samples without the need to cool the sample, which makes the ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Principle : ESE-LASER-HCL-200P Portable laser gas analyzer using a Tunable Diode Laser Absorption Spectroscopy (TDLAS), the realization of the non-contact measurement in high temperature, high pressure, high dust and other harsh test conditions. High selective laser based on frequency, analyzer has good performance of anti interference. compared to the traditional analysis method, reducing the ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
ESE-LASER-100P The portable laser gas analyzer is composed of a gas analyzer main unit, an integrated heat tracing line, and an extendable probe. The sample gas is sampled and analyzed by a high-temperature heat extraction technique. Under the action of the sampling pump, the gas to be tested enters the gas analyzer main unit to analyze the gas chamber through the front-end filter element and the ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
High-temperature hygronom is also called high-temperature moisture meter or high-temperature dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration, widely applied in industrial online humidity ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-100/MS-1000 is a self-developed online dust analysis product and a dust particle measuring device, adopting laser backward scattering measuring technology with imported core components. The DMS-100/MS-1000 dust particle measuring device is mainly used for continuous monitoring of PM emission concentrations of various pollution sources. The DMS-100/MS-1000 dust particle measuring device can be ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-200 dust monitor is a self-developed probe-in monitor, based on years of research on dust detection technology. Different from traditional back scattering dust monitor (such as DMS-100/MS-1000), DMS-200 installs a dust measurement module at the top of the probe, which directly stretches into the stack for dust measurement in close distance and it adopts laser forward scattering method to ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DMS-300 I dust monitor is a self-developed extraction dust monitor, based on years of technology research and development for dust monitoring. It uses laser forward scattering prnciple to monitor the dust concentration. It owns features of low detection limit(as low as 0.05mg/m3), no interference by moisture with full process high temperature heat tracing for measurment. It can be widely applied ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: Extractive gas analysis. Emission and process monitoring. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For mobile or stationary extractive gas analysis. For emission and process monitoring. Continuous sample gas conditioning of humid process gases. Continuous drying of sample gas to a precise low and constant outlet dew point. Minimises water vapour cross sensitivities and volumetric ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you