F&J Air And Climate Equipment Available In South Korea
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-AB-20L-BL-AC is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) line power or (2) an external 12-15 VDC power ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Applications / Characteristics: Increased chemical resistance used to monitor airborne particulates. Does not adsorb acid ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-60810DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-60810DT Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flow rate range attainable through the filter media is dependent upon the air porosity of the filter media. Flow rates as high as 200 ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethylene glycol, which retain the HTO component. The sample gas, now less the tritiated water vapor, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. The oxidized sample gas flows through two (2) more vials with ethylene glycol that retain the ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Filter Holder Aluminum Combination, Model C, In-Line, 47 mm particulate – 3/8″ FNPT. ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-HKUPG-BL series upgrade kits are designed to upgrade existing analog high volume brushless air sampling stations currently utilizing chart recorders and electromechanical timers. The DF-HKUPG-BL up-grade kit eliminates the need to purchase an entirely new air sampling ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
This laminated glass product is a high efficiency multi-purpose filter medium with good heat resistance. It is particularly recommended for both gas and liquid filtration in the medical field and for monitoring ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-5L-BL-8 is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAH NiMH batteries, (2) line power, or (3) automobile cigarette lighter ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “B” Series. Plastic Cased. Dimensions:. Diameter = 2.53” ± 0.01 (64.3mm ± 0.25mm). Height = 0.98” ± 0.01 (24.4mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-ABM50-40L-20Li is a military grade lightweight, small footprint, DC voltage powered air sampling system operable from (1) line power, (2) an on-board 20 Ah Lithium ion battery, (3) an external 12-15 VDC power source, or (4) from the F&J LIBATBANK-12V external DC power ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “M” Series. Metal Cased. Dimensions:. Diameter = 2.51” ± 0.01 (63.8mm ± 0.25mm). Height = 1.01” ± 0.01 (25.7mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model FJ-28B is counter-top cabinet model, low-volume air sampler with a 1/4 HP oil-less carbon vane vacuum pump, and a constant air flow regulator for use where a near constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass valve into the pump. This system allows the pump to work at a minimum head drop at all ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Plastic Combination. Open-Face, 2.0″ Particulate. Model B 3/8″ ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “3.1” Series. Plastic Cased. Dimensions:. Diameter = 3.44” ± 0.02 (87.4mm ± 0.51mm). Height = 1.24” ± 0.02 (31.5mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHTE heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHTE contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model: CSM” Series. Plastic Cased. Dimensions:. Diameter = 2.25” ± 0.01 (57.2mm ± 0.25mm). Height = 1.02” ± 0.01 (25.9mm ± ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DFHV-200 (120VAC) and the DFHV-200E (230VAC) Digital Flow Meter Series air samplers are high volume air samplers with a two stage, thermally protected electric motor driven vacuum blower and a 7-foot long electrical cord. The motor driven blower is contained in a very durable lightweight plastic polycarbonate housing with a sturdy stable base, having non-skid rubber feet. The flow rate is ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model GAS-28B Global Air Sampling System is a microprocessor controlled low volume air sampler consisting of an ¼ H.P. oil-less carbon vane vacuum pump with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line venturi by varying the flow through a bypass valve into the pump. This system ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The H8400 (100-120VAC) and the H8400E (200-240VAC) Series Air Samplers are high volume air samplers with a two stage, electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated in cubic feet per minute (CFM) ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model “3.2” Series. Plastic Cased. Dimensions:. Diameter = 3.21” ± 0.01 (81.5mm ± 0.25mm). Height = 2.32” ± 0.01 (58.9mm ± ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you