Air & Climate Equipment available in Swaziland

Available in Swaziland| Near Swaziland
15075 Results found

We couldn't find any results in Swaziland

Here is a list of results available in Swaziland

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • Available in: Africa ×

  • Available in: Swaziland ×

MercSampler - Model XC-6000EPC-W - Automated Sorbent Trap Monitoring System

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The automated XC-6000 EPC MercSampler for Sorbent Trap Monitoring Systems is designed for continuous dual sampling of vapor-phase mercury emissions from stationary combustion sources, in accordance with the U.S. EPA MATS published in 40 CFR, Part 60-63, Appendix A, Subpart UUUUU and is MATS compliant. Performance Specification 12B: Specifications ...

Aqua Bailers - VOC Tips

by Aqua Bailers, Inc.     based in Knoxville, TENNESSEE (USA)

The Aqua Bailers VOC Tips, also known as Slow-Emptying Devices, are constructed of polyethylene or FEP and sized to fit any of our standard or mini bailers. These tips reduce water flow from the bailer, minimizing agitation and allowing a more accurate measurement of VOCs.

Ferrator - Fe50 -- On-Site Ferrate Reactor For Municipal And Industrial Applications (Treats 12 MGD of water at 1 ppm dose of Ferrate)

by Ferrate Treatment Technologies, LLC     based in Orlando, FLORIDA (USA)

The Ferrator is the first patented, on-site Ferrate reactor for municipal and industrial applications. With this breakthrough of small, inexpensive, transportable on-site synthesis reactors, Ferrate can now be delivered continuously for chemical, industrial, and environmental treatment processes in commercially significant quantities. The Ferrator ...

LANDTEC - Model DAQ - Universal

by LANDTEC     based in Colton, CALIFORNIA (USA)

Cost effective stationary monitoring in the LANDTEC System is easily accomplished using the Universal DAQ. This streamlined platform, enables monitoring, data collection and reporting of stored data from a wide variety of devices and manufacturers at remote locations. Ideal for monitoring continuous operation as well as periodic flare shutdowns ...

Model ACCU-FLO - Wellhead

by LANDTEC     based in Colton, CALIFORNIA (USA)

Prefabricated flow control devices specifically developed for installation on LFG extraction system wells. These easily-installed wellheads incorporate a built-in gas flow measurement device, gas temperature port, quick-connect gas sample and pressure ports, flow control gate valve and flex-hose. Both horizontal and vertical configurations are ...

Training Network - Model 2706-DV - Compressed Gas Cylinders in the Laboratory

by The Training Network     based in Durham, NORTH CAROLINA (USA)

The energy possessed by a compressed gas cylinder can make it a virtual missile if it is not handled with the utmost care. And a leaking cylinder or fitting can lead to asphyxiation, a fire or even an explosion. Since compressed gas cylinders are frequently used in many laboratories, employees need to be familiar with the precautions that should ...

Model BAS003 - Directional Sound Source

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The BAS003 Source is designed to generate homogeneous sound fields using random noise in compliance with the following standards: Building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-3, ASTM E90, ISO 140-5, ASTM E966). The BAS003 is typically used to generate a noise in a free-field for the evaluation of the transmission loss ...

SONOSCAN - Model RD - Ultrasonic Detector

by SONOTEC Ultraschallsensorik Halle GmbH     based in Halle (Saale), GERMANY

The SONAPHONE RD ultrasonic detector provides quick and easy detection of minor leaks and seal failures. The mobile handheld device locates leaks incompressed air linesand insteam, gas and vacuum systemsboth safely and precisely. The SONAPHONE RD can also be used to inspect tanks, pipes, valves, gates and steam traps.

Hamm - Model 3307 HT P - Padfoot Compactor with Hammtronic

by Hamm AG     based in Tirschenreuth, GERMANY

Spring-mounted driver seat, Double-sided access, Seat console, can be moved and swivelled laterally, Continuously variable hydrostatic all-wheel drive, Excellent engine power with traction control, Automatic traction and slip control, Engine management, Speed pre-selection, Automatic frequency control with digital display, Swivelling steering and ...

Indigo - Bio-Degradation Accelerator

by Agri-Gro Marketing, Inc.     based in Doniphan, MISSOURI (USA)

The “Natural Solution” to Wastewater Treatment and Odor Control for the treatment of Municipal, Industrial, Agricutural, Residential and Recreational Wastewater.

Pall Ring - Packing Support Plates

by The Pall Ring Company     based in Kings Lynn, UNITED KINGDOM

A random packed bed is held on a Packing Support Plate, whose essential attributes are to have a high percentage of open area so as to not inhibit the capacity of the tower and to allow the unrestricted counter-current flow of both liquid and vapour through it. This is achieved by providing separate passageways for the gas and the liquid. A series ...

Scintec - Model BLS450 Series - Large Aperture Scintillometer

by Scintec AG     based in Rottenburg, GERMANY

The Scintec BLS450 Large Aperture Scintillometer measures atmospheric turbulence and heat flux over path lengths between 250 m (with Path Reduction Aperture, otherwise 500 m) and 6000 m. As part of a meteorological station it can also be used to determine the evapotranspiration over extended areas.

Plastic Raschig Rings

by Naturegreen Exports     based in Rajkot, INDIA

Available in MOC : Polypropylene , PPH etc.

Model WMP Series - Large Capacity Wall Mount Combination Systems

by Shield Air Solutions Inc.     based in Houston, TEXAS (USA)

Factory certified for compliance to applicable codes and standards. Spark resistant fan and blower construction. EPA approved, HFC type refrigerants. Single cut-out requirement for building wall. Supply and return air registers for ductless air handling. Through-the-wall controls section for indoor access to operating controls. Built-in, automatic ...

Model WCP Series - Wall Mount Combination Systems

by Shield Air Solutions Inc.     based in Houston, TEXAS (USA)

Certified by CSA (bearing the CSA mark) for compliance to applicable codes and standards. Spark resistant fan and blower construction. EPA approved, HFC type, R-410a refrigerant. Single cut-out requirement for building wall. Supply and return air registers for ductless air handling. Through-the-wall controls section for indoor access to operating ...

Vehicle Mass Analysis System (VMAS)

by Sensors, Inc.     based in Saline, MICHIGAN (USA)

The Vehicle Mass Analysis System (VMAS) measures exhaust mass using a reliable, accurate and low cost method in both centralized and de-centralized inspection and maintenance programs. The VMAS uses an innovative technique for measuring exhaust volume. This technique, coupled with current low cost NDIR gas analyzers, provides for a highly accurate ...

VeGA - Model 1-6940 - Control Valve

by Parcol S.p.A.     based in Canegrate (MI), ITALY

VeGA Cryo 1-6940 control valves are designed for very low temperatures (up to -196°C) encountered in the cryogenic industry and in natural gas liquefying plants (NGL).Made with materials selected specifically for this type of service, Vega Cryo valves are normally tested immersed in liquid nitrogen, using helium as the test fluid in accordance ...

Model Spiromatic 90USA - Self-Contained Breathing Apparatus

by INTERSPIRO, Inc.     based in Pleasant Prairie, WISCONSIN (USA)

SPIROMATIC 90USA is a simple but effective breathing apparatus (SCBA) for industrial and maritime environments. Spiromatic 90USA is built upon proven and reliable components, with decades of solid performance and reliability. The Spiromatic facemask, breathing valve and regulator deliver real performance at a competitive price. The facemask ...

Model CE351 - Atmospheric Multi-Band Imager

by Cimel Electronique S.A.S (Cimel)     based in Paris, FRANCE

CE351 imager measures the sky radiance in 6 bandwidths from 406 nm to 628 nm. Its original patented design of its telecentric optics (Fish-eye +/- 92°) ensures an absolute measure with high angular resolution The instant measure of sky radiance brings complementary information in observation networks for the optical properties of the ...

TECHNO - Self-Supporting, Articulated Arm

by FILCAR S.p.A.     based in Cella Reggio Emilia, ITALY

Self-supporting, articulated arm for extracting welding fumes. Supplied with wall mounting bracket and hood complete with positioning handle and damper. The externally mounted support system guarantees low noise levels, eliminates turbulence andprolongs the working lifeof the joints. Available with a 'flag-type' extension tor lengths exceeding 5 ...

Need help finding the right suppliers?

Let the XPRTs do the work for you