Air And Climate Equipment With Dry Bulk Material Processing For The Mining & Minerals Industry Applications Available In Arkansas
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The Klean-In-Place II rotary airlock valve is specially designed for applications where frequent cleaning, sanitizing or inspection of the bulk handling system is required and minimum downtime is critical. The Klean-In-Place II has uniquely designed features making it compliant for FDA, USDA, 3A dairy and NFPA standards for materials used in food, dairy, chemical, and pharmaceutical applications. ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The F-Series Double-Flapgate Airlock Valves are designed for low-pressure basic dust collection applications with maximum 30″ WC pressure differentials, where low cost is critical and a rotary airlock or slide gate is unnecessary. Operating temperatures for the F-Series are normally in the 250°F range. Used under cyclones, baghouses and collection hoppers, these double flap valves are a ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The HDAR Heavy Duty Abrasion-Resistant Drop-Thru rotary airlock valves are designed for severe applications where highly abrasive conditions exist. Offered in a choice of ceramic lined or DuraKast, both can significantly improve the wear factor on the valve and reduce the pre-mature equipment failure often associated with such ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The HDPV Heavy Duty Pellet rotary airlock valves are specially designed with offset inlet and discharge openings to reduce product shearing while permitting an even flow of pellets and chip materials into each rotor pocket. The design uses a slide gate to control the flow of pellets through the side inlet and into the rotor. The HDPV eliminates serious jamming problems experienced with standard ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
Meyer FV Fabricated rotary airlock valves are especially suited to handle large volumes of light to medium density products including large irregular material typically found in dust collection and low pressure pneumatic systems. These valves are available in carbon steel, stainless steel or abrasion resistant steel as an economical solution. The precision cut and welded valves feature flange ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The CD Custom Design Series rotary airlock valves are a culmination of three generations of Meyer application expertise. These valves are designed to handle extreme operating conditions, unique customer needs or unusual installation requirements. Meyer sales engineers work directly with the customer to tailor a custom solution to their ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The Meyer W.E.A.R. (Wear Elimination & Abrasion Reduction) Valve provides the ultimate package for your abrasive material build up applications. The valve internals are coated with a variety of wear resistant coatings specifically matched for the materials conveyed. Housing coating options include Heavy Chrome, Diamond Chrome, Ceramic and Chrome Carbide along with all White Iron cast designs. ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The DDV Dust Duty Valves are designed to provide a low cost airlock solution for simple dust collection under baghouses and cyclones. This design is uniquely suited for a low pressure application where a quality air seal is necessary in light duty non-abrasive dust collection applications. The DDV valves are available in sizes 6 through 14 with square or round housings to match most collector ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The HDBT Heavy Duty Blow-Thru rotary airlock valves are ideal for the Pneumatic Conveying of free-flowing material in food, grain, chemical, milling, baking, plastics and pharmaceutical applications. These units are uniquely designed to handle non-abrasive powders and where the product requires an assist in clearing the rotor vane pockets. The HDBT design is especially suited for low headroom ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The HDSE Heavy Duty Side Entry Drop-Thru rotary airlock valves are designed for applications involving relatively large particles that cannot be reduced by the shearing action between the rotor blades and the housing at the inlet. They are also suitable for applications where small fines produced by the shearing action could cause damage to the system or create hazards. The built-in ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The A-Series Cast Double Flapgate Airlock Valves are designed for medium-pressure applications and standard temperatures to 650°F. Their cast iron housing, White Iron/Ni-Hard seats and flaps make them an economical alternative to rotary ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The Kwik-Klean rotary airlock valves are designed for fast and simple disassembly and re-assembly, allowing for quick inspection, clean-up and maintenance without the use of tools or removal of the valve from service. The valves use hand-tightened fasteners to secure the headplate to the housing. With the headplate and rotor conveniently removed, the entire housing interior is accessible. ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The Meyer HDXP Heavy-Duty, NFPA design valves are custom applied units to your specific application. Meyer engineers review the application and evaluate the design based on KST values for the material, temperature, pressure and ambient conditions. Units can be built in cast iron, stainless and cast steel to match the specific NFPA requirements. Special XP switches, controls and motors are also ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The Klean-In-Place rotary airlock valves are specially designed for applications where frequent cleaning, sanitizing or inspection of the bulk handling system is required and minimum downtime is critical. They are also ideal for batch systems where regular cleaning between cycles is required. The valves need no tools to unscrew the release handles and remove the headplate. Four slide bars with ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
The HDX Heavy Duty Extra-Tough Drop-Thru rotary airlock valves are designed to withstand high temperatures and pressure differentials up to 22 psi. This legendary design sets the standard by which all others in the industry are measured. It offers the heaviest gauge rotor vane stock of any competing product, extra thick endplates, flanges and housing walls, along with outboard mounted oversized ...
-
Manufactured by Wm. W. Meyer & Sons, Inc.based in USA
Ideal for pollution control across many industries. The UDV Universal Duty Valve is designed for economical and reliable material metering and airlock ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you