Air & Climate Equipment in Illinois

1714 Results found

Current filtering criteria

You can remove a filter by clicking on the x

212˚F Steam Condensate Return Stations

by Roth Pump Company     based in Rock Island, ILLINOIS (USA)

Roth 212 ° F (100 ° C) Steam Condensate Return Stations are designed to handle water near or at the boiling point. Low NPSH submerged pumps provide full capacity at any liquid temperature up to 212 ° F (100 ° C). These units will deliver hot water at temperatures up to 212 ° F (100 ° C) and will not vapor bind at 212 ° ...

Model BA 8000 - Diode Laser In-Situ Gas Analyzer

by Bühler Technologies GmbH     Office in Frankfort, ILLINOIS (USA)

When sampling reactive or highly corrosive gases, the in-situ measurement technique is the preferred approach. It solves many sampling and analytical problems inherent in difficult applications. The BA 8000 In-situ Gas Analyzer, is designed to meet the most difficult gas measurement challenges.

Flexi-Sorb - Noise Control Curtain System

by Industrial Noise Control, A Division of Sound Seal, Inc. (INC)     based in North Aurora, ILLINOIS (USA)

Industrial Noise Control, Inc. Flexi-Sorb™ noise control curtain product line consists of flexible, durable acoustical curtain panels with pre-engineered support track and framework components … flexible building blocks  …  that can be configured into a wide variety of full & partial enclosures, barriers and ...

EAF Off-Gas/Dust Radiation Detection System

by RadComm Systems     Office in Valparaiso, ILLINOIS (USA)

INTRODUCTION (Why radioactivity has become such a problem in the Metals Industry?): To date there have been 65 reported incidents of SEALED radioactive sources being smelted in ferrous and non-ferrous operations. Smelting a sealed source in a furnace causes serious plant contamination and costs millions of dollars in plant decontamination ...

Mass Flowmeters for Installed Industrial Applications

by TSI Incorporated     Distributor in ILLINOIS (USA)

TSI Series 4200 mass flow sensors are specifically designed to measure gas flow rates in embedded applications. The rugged housing with sealed electronics and locking connector make them highly reliable in more demanding environments. They feature a very low pressure drop, wide flow rate range and 20 millisecond response time. Series 4200 mass ...

Manning - Model EC-F2 - Ammonia Sensor

by Honeywell Analytics     based in Hegnau, SWITZERLAND

An Ammonia sensor that exhibits excellent accuracy and precision. The Manning EC-F2 Sensor is a three-wire, 4/20 mA sensor for Ammonia available in ranges of 0-100 ppm, 0-250 ppm, 0-500 ppm and 0-1,000 ppm.

Nederman - Model FX - Solder Fume Extraction Arms

by Nederman     Distributor in ILLINOIS (USA)

For extraction of solder fumes and capturing of odors when gluing, or working with solvents, The Bench Top FX fume and odor extraction arms are made of light-weight anodized aluminium sections, with two or three adjustable, plastic friction joints. For extraction of solder fumes when soldering and for capturing odors from gluing, or working with ...

Sweetfilter II - Model SF-220 - XPellet Commercial Sewer Odor Refills

by Pennington Equipment Company     based in Springfield, ILLINOIS (USA)

3.5 gal. pail, tan granules, -3, +5 Mesh impregnated with chlorine dioxide;. 50 lbs/cuft, on average) Can be supplied with sock size refill bags as specified above.

Cool-Ox - In-Situ (and Ex-Situ) Remediation Technology

by DeepEarth Technologies, Inc     based in Alsip, ILLINOIS (USA)

The patented Cool-Ox process is an in-situ (and ex-situ) remediation technology that combines controlled chemical oxidation with accelerated biodegradation subsequent to the oxidation phase. The process is based upon using hydrogen peroxide as the generator of the oxidizing radicals. However, unlike the Fenton or Fenton-like processes that use ...

Model A-151 - Solvent Degreaser

by LPS Laboratories     Distributor in Wheeling, ILLINOIS (USA)

NSF Certified: C1 Registration # 059811 (Aerosol); # 059812 (Bulk). Controlled evaporation. Ideal for parts washers, dip tanks, and ultrasonic cleaners. Contains no chlorinated solvents. Removes oil, grease and other contaminants. Non-conductive, low odor. VOC compliant in all 50 states. High flash point 158°F (70°C)

Jerome - Model 431 - Gold Film Mercury Vapor Analyzer

by Arizona Instrument LLC     Distributor in Bensenville, ILLINOIS (USA)

The Jerome 431 mercury vapor analyzer uses a patented gold film sensor for accurate detection and measurement of toxic mercury concerns for applications such as industrial hygiene monitoring, mercury spill clean up and mercury exclusion testing. Simple push-button operation allows users to measure mercury levels from 0.003 to 0.999 mg/m3 in just ...

Model QX Series - Fully Automated Gravimetric Sample Preparation

by Mettler - Toledo Int. Inc     Distributor in ILLINOIS (USA)

The ultimate in high quality batch sample preparation. Reduce Errors with Perfect Concentration. To prepare a solution, powder and liquids are dispensed automatically. Gravimetric sample preparation ensures the highest level of reproducibility; errors are reduced  by up to 60 %.

Lyssy - Model L100-5000 - Manometric Gas Permeation Analyzer

by Systech Instruments Ltd     Office in Johnsburg, ILLINOIS (USA)

A versatile gas analyzer for measuring the permeability of any common gas or gas mixture through films and foils. Typical gases measured include air, oxygen, nitrogen, carbon dioxide, hydrogen and helium.  This instrument utilizes the manometric principle one of the most recognised gas permeability testing methods - pressure change via gas ...

Portamap - Portable Oxygen and Carbon Dioxide Headspace Analyzer

by Systech Instruments Ltd     Office in Johnsburg, ILLINOIS (USA)

Portable oxygen analyzer for measuring headspace gas of modified atmosphere food packaging. The Portamap portable gas headspace analyzer is specifically designed to test for the presence of oxygen and carbon dioxide in food packaged under modified and controlled atmospheres. The portable oxygen and carbon dioxide analyzer is simple to use and is ...

Shand & Jurs Biogas - Model 97130 - Thermal Valve

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97130 Thermal Valve is a thermally operated shut-off valve typically located in low pressure biogas lines such as downstream of anaerobic digesters, landfills and lagoons, or upstream of flares and waste gas burners.

Model BA 5000 - Gas Analyser For IR-Sensitive Oxygen and H2S

by Bühler Technologies GmbH     Office in Frankfort, ILLINOIS (USA)

The BA 5000 gas analyser can measure up to 4 gas components. The instrument can be configured a maximum of three infrared gases such as CO, C02, NO, S02, or CH4 plus the measurement of 02 with an electrochemical fuel cell. For oxygen analysis, the BA5000 can be equipped with either electrochemical or paramagnetic measuring cell.

Jerome - Model 631 - Gold Film Hydrogen Sulfide Analyzer

by Arizona Instrument LLC     Distributor in Bensenville, ILLINOIS (USA)

The portable Jerome 631 Hydrogen Sulfide Analyzer displays low-level concentrations in just seconds. It offers an analysis range of 0.003-50 ppm for odor and corrosion control, safety, and leak detection in such industries as wastewater treatment, oil and gas, pulp and paper, and farming. This simple-to-use instrument utilizes an internal ...

Gasmet - Model FCX-Series - FTIR Process Gas Analyzer

by Gasmet Technologies Oy     Distributor in Bensenville, ILLINOIS (USA)

The Gasmet FCX-Series features a comprehensive range of high performance FTIR process gas analyzers. The wall mounted Gasmet FCX process gas analyzers offer reliable results even when analyzing complex gas mixtures. The Gasmet FCX process gas analyzers incorporates a Fourier Transform Infrared spectrometer, gas cell, and signal processing ...

HORIBA - Model APSA-370 - Ambient Sulfur Dioxide Monitor

by HORIBA Europe GmbH     Distributor in ILLINOIS (USA)

The APSA-370 is a device for the continuous monitoring of atmospheric SO2 using UV fluorescence. The APSA-370 employs an proprietary, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry-method, due to its minimal maintenance requirements capability of continuous monitoring and instantaneous ...

HORIBA - Total System Integration / Multiple Pollutants Monitoring

by HORIBA Europe GmbH     Distributor in ILLINOIS (USA)

HORIBA designs, assembles, calibrates and tests complete integrated systems for simultaneously measuring multiple pollutants. A system for monitoring five pollutants can typically fit into one 19-inch rack. Rack-mounted systems can be installed in equipment rooms, stand-alone shelters, trailers, vans, large trucks, or aboard vessels. HORIBA can ...

Need help finding the right suppliers?

Let the XPRTs do the work for you