Air and Climate Equipment in Nebraska

  • Premium

    ProPak - Sample Bags

    These convenient, single-use sample bags bring a new dimension of productivity to your water and wastewater sampling. Using the patented Teledyne ISCO ProPak sample bag will reduce your sampling costs by eliminating the expense of washing and storing conventional bottles while, at the same time, eliminating worries about contamination from ...

    By Teledyne ISCO based in Lincoln, NEBRASKA (USA). from Sample Bags Product line

  • Model CB Series - Blend-Veyor

    The CB Series Blend-Veyor is a vacuum-loaded, semi-dense phase blender and conveyor with a capacity of up to 80 TPH. It is best suited for multiple sourced, powdered, granular or pelletized abrasive materials that are friable. Medium pressure blower air is used to venturi-vacuum load and convey two or more materials at lower line velocities and ...

    By Cyclonaire Corporation based in York, NEBRASKA (USA). from Blend-Veyor Product line

  • Ambient - Industrial Air Cleaners

    Aztech T-Series Industrial Air Purifiers are designed for fume extraction, welding smoke collection, industrial dust extraction, oil mist filtration and the capture of most airborne nuisance dusts, mist and vapors. The simple yet effective units have a two stage filtration system; Merv 7 pre-filters and Merv 15 multi-pocket main bag filters. ...

    By Industrial Maid LLC based in Cortland, NEBRASKA (USA).

  • IndMaid - Model EB80-1 - Dust Control Booths

    Industrial Maid Dust Control Booths provide unrivaled solutions for all types of industrial air filtration challenges.

    By Industrial Maid LLC based in Cortland, NEBRASKA (USA).

  • OmniPure - Sub-Boiling Distillation System

    The OmniPure Sub-Boiling Distillation System is a fully automated unit with all wetted parts composed of inert, high-purity Teflon PFA and FEP. The distillation assembly consists of a directly heated distillation container and an air-cooled condensation bottle. No external cooling system is required. The OmniPure uses a closed design with a ...

    By Teledyne CETAC Technologies based in Omaha, NEBRASKA (USA). from Sub-Boiling Distillation System Product line

  • Sukup - Axial Fans & Grain Heaters

    Sukup manufactures a full line of axial fans and heaters for aerating and drying grain. Sukup Axial Fans provide maximum airflow at lower static pressures found in aeration or in-bin drying. Sukup also offers 38” and 44” low speed axial fans for roof dryers and other shallow grain depth applications.

    By Sukup Manufacturing Co. Office in Aurora, NEBRASKA (USA). from Axial Fans & Grain Heaters Product line

  • Low Static Pressures Axial Fan

    PAG composite impellers for Faster startup, Long-term balance on 16” to 28” Fans. 24” & 28” equipped with cable brackets for hanging installations. Agriculture-duty motor. Models available from 12” to 28”. Low horsepower

    By Nebraska Engineering Company (NECO) based in Omaha, NEBRASKA (USA). from Low Static Pressures Axial Fan Product line

  • AIRLANCO - AVR & ART Receivers

    AIRLANCO Receivers are available in AVR Side Bag Removal or ART Top Bag Removal models. Both are robustly built for high pressure/vacuum operation and feature tangential inlets, hopper segments designed specifically to handle your bulk materials, and compressed-air pulse jet cleaning of filter media.

    By AIRLANCO based in Falls City, NEBRASKA (USA). from AVR & ART Receivers Product line

  • AIRLANCO - Tapered Roof Exhausters

    Our Universal Tapered Roof Exhausters are designed to fit any sloped-roof or round metal bins without the need for special adapters. The removable top cover allows you to position and bolt the units in place before cutting holes and permits easy service access.They come in 24-inch, 2hp models rated at 10,200 cfm.

    By AIRLANCO based in Falls City, NEBRASKA (USA). from Tapered Roof Exhausters Product line

  • Twin - Model AP101 - Big Volume Guns

    Nozzle range 7 nozzles, 0 14.0-26.0 mm, 0 0.55'-1.02'. Flow range 13.0- 73.5 ms/h 62-332gpm. Throw range G 29.5-54.0 m 0 98-180 ft

    By Komet Austria GmbH based in Lienz, AUSTRIA. from Big Volume Guns Product line

  • Cyclonaire - Model DPG-B Series - Dense Phase Conveyor

    Efficiently and effortlessly convey fluidizable materials, such as plastics, detergents, food and more, with Cyclonaire’s DPG-B Series dense phase conveyor. Our DPG-B Series conveyor features a gravity-loaded, bottom-discharge transfer with a 400+ TPH capacity for high-demand jobs. It provides a high material-to-air ratio and intermediate ...

    By Cyclonaire Corporation based in York, NEBRASKA (USA). from Dense Phase Conveyor Product line

  • Cyclonaire - Model C Series - Vacuum Loaded Semi-Dense Phase Conveyor

    The C Series is a vacuum loaded semi-dense phase conveyor with a capacity of 5-50+ TPH. It is best suited for powdered, granular or pellet abrasive materials that are friable. Medium pressure blower air is used to venturi-vacuum load and convey material at intermediate line velocities and material-to-air ratios for less abrasive wear and particle ...

    By Cyclonaire Corporation based in York, NEBRASKA (USA). from Vacuum Loaded Semi-Dense Phase Conveyor Product line

  • Dress & Seal - Model WB & WB 30 - Water-Based, Acrylic Copolymer Cure, Sealer and Dustproofer

    DRESS & SEAL WB formulations are water-based, low VOC, acrylic copolymer solutions that cure, seal and dustproof concrete without yellowing. The tough film locks in moisture, curing the concrete for maximum hardness. These clear, fast drying, sprayable liquids are equally effective on interior as well as exterior surfaces. DRESS & SEAL WB ...

  • LI-COR - Model LI-820 - CO2 Gas Analyzer

    The LI-820 CO2 Analyzer is a low cost, low maintenance CO2 analyzer designed for continuous monitoring applications. It is an absolute, non-dispersive infrared (NDIR) gas analyzer based upon a single path, dual wavelength, infrared detection system. It can be used in a wide range of environmental conditions.

    By LI-COR based in Lincoln, NEBRASKA (USA).

  • Bulk Bag Unloader

    Cyclonaire’s quality built bulk bag unloading station is the most flexible and most customizable choice for your demanding needs and cost conscious budget. Start with our basic heavy duty, carbon steel box tubing frame, custom built to handle any weight or size of bulk bags. Add custom features for your needs— electric hoist, bag ...

    By Cyclonaire Corporation based in York, NEBRASKA (USA). from Bulk Bag Unloader Product line

  • IndMaid - Model DS Series - Diesel Smoke & Fumes

    The DS Series Air Cleaning Systems are designed specifically for the removal of exhaust emissions, fugitive dusts and other airborne contaminants commonly found in firehouses and other municipalities.The system is simple to install, offers automatic starts activated by sensor controls and is a very cost effective solution for the control of diesel ...

    By Industrial Maid LLC based in Cortland, NEBRASKA (USA).

  • Model ENC-500 - Anti-Contamination Enclosures

    The ENC-500 Enclosure is all about protection. It protects samples from environmental dust and impurities, mantaining sample integrity and ensuring reliable results. It vents noxious and corrosive gases away from the work environment protecting personnel and equipment. The ENC-500 protects the bottom line.

    By Teledyne CETAC Technologies based in Omaha, NEBRASKA (USA). from Anti-Contamination Enclosures Product line

  • AIRLANCO - Axial Fans

    AIRLANCO Axial Fans are engineered for efficient, high-volume air delivery where storage depth is low to medium. Axial airfoil propellers are cast of shatter-resistant aluminum alloy. They are statically and dynamically balanced and secured to the motor shaft with a self-locking mechanism. Housings are constructed of heavy-gauge steel to exacting ...

    By AIRLANCO based in Falls City, NEBRASKA (USA). from Axial Fans Product line

  • AIRLANCO - Bin Vents

    AVS Bin Vents utilize pulse jet action to keep pneumatic systems running clean and in compliance with local air quality regulations. They filter out the product dust and debris captured in conveying air before it is vented from storage bins.

    By AIRLANCO based in Falls City, NEBRASKA (USA). from Bin Vents Product line

  • KroyInd - Model SDR81 - Metal Heat and Air Duct System

    In 1967, building contractors and installers of sheet metal heat and air duct systems approached Kroy Industries to develop a product for heat and air installation to eliminate the corrosive problems occurring from water infiltration and leaks in metal ducts under the slab.

    By Kroy Industries, Inc. based in York, NEBRASKA (USA). from Metal Heat and Air Duct System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you