Air & Climate Equipment in North Carolina

752 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Air & Climate ×

  • In: USA ×

  • In: North Carolina ×

Training Network - Model 2706-DV - Compressed Gas Cylinders in the Laboratory

by The Training Network     based in Durham, NORTH CAROLINA (USA)

The energy possessed by a compressed gas cylinder can make it a virtual missile if it is not handled with the utmost care. And a leaking cylinder or fitting can lead to asphyxiation, a fire or even an explosion. Since compressed gas cylinders are frequently used in many laboratories, employees need to be familiar with the precautions that should ...

Double Membrane-Gas Storage On Tanks

by SATTLER AG     Office in Hudson, NORTH CAROLINA (USA)

Tank covering with integrated gas storage for high pressures and large volumes. Outer shell protecting against climatic conditions – spherical or cylindrical is external loads such as wind, snow and climatic conditions. With the help of clamping rails the outer and inner membranes are clamped to the tank in such a way that they are leak-proof and ...

Gas Storage Membranes

by SATTLER AG     Office in Hudson, NORTH CAROLINA (USA)

SATTLER gas membranes are used in different blank cuts and shapes for different special solutions. Guided internal membranes clamped in the centre of the container are a typical example. Membranes can be adjusted to a variety of container geometries and clamping conditions.

PULSCO - Vent Silencer

by PULSCO Inc.     Distributor in Charlotte, NORTH CAROLINA (USA)

PULSCO’s Vent Silencers provide the solution to high intensity, broadband noise associated with pressure relief systems. At a given set of operating conditions, each silencer is designed to meet the required noise level criteria specific to customer application.

Donaldson Torit PowerCore - Model TG Series - Dust Collectors

by Donaldson Torit     Distributor in Clemmons, NORTH CAROLINA (USA)

Just how small is the Torit PowerCore TG Series collector? This collector, designed for thermally generated dust, is in a category by itself with a footprint up to 65% smaller than most cartridge collectors and smarter technology housed in the widest range of completely packaged and assembled units available up to 10,000 cfm.

3M - Model 8511Pro, N95 40/Case - Particulate Respirator

by 3M Detection Solutions     Distributor in NORTH CAROLINA (USA)

This disposable N95 particulate respirator features 3M Cool Flow Valve and braided headbands. Ideally suited for hot/dusty work settings that require long periods of wear. Packaged for store front sales. 3M CoolFlow Valve and adjustable M nose clip, Braided head bands and soft inner materials, Spacious and is durable, Design to increase comfort ...

MIDAC - Model Titan-OL - Turnkey, Process-Ready Gas Analysis System

by MIDAC Corporation     Office in NORTH CAROLINA (USA)

The Titan-OL is a turnkey, process-ready gas analysis system. The analyzer and sample handling hardware can be wall or frame mounted in a NEMA enclosure suitable for use in production environments, including Class I, Div. 1. The integrated sampling system is fully purgeable and can handle multiple sample and reference lines. The Titan-OL is ...

Buck Scientific - Model 410 - Mercury Analyzer

by Buck Scientific Inc     Distributor in NORTH CAROLINA (USA)

The Model 410 Mercury Analyzer incorporates the Hatch & Ott Cold Vapor Technique for the analysis of trace levels of mercury in drinking, surface and saline waters, as well as domestic and industrial wastes.  Perfect for EPA Method 245.1.

Nederman - Model FX - Solder Fume Extraction Arms

by Nederman     Office in Thomasville, NORTH CAROLINA (USA)

For extraction of solder fumes and capturing of odors when gluing, or working with solvents, The Bench Top FX fume and odor extraction arms are made of light-weight anodized aluminium sections, with two or three adjustable, plastic friction joints. For extraction of solder fumes when soldering and for capturing odors from gluing, or working with ...

Wager - Model 1600 - Sewer Vent Valve

by Robert H. Wager Company, Inc.     based in Rural Hall, NORTH CAROLINA (USA)

The 1600 Series Sewer Vent is cast from 356-T6 aluminum alloy for light weight construction. The valve is then powder coated the a green epoxy that is highly resistant to sewer acids and gases. It is finished with a green coating that blends in nicely with the existing environment. A 1/4' x 1/4' protective mesh screen keeps debris and insects form ...

Condensate Polishers

by Hungerford & Terry, Inc.     Distributor in NORTH CAROLINA (USA)

High-Rate, Deep-Bed Polishers for Boiler Protection: Deep-bed condensate polishing is an ion exchange process which is used to remove trace contaminants, both dissolved and suspended, from high-purity water. The reason for deep-bed polishing is to purify the same water which is recycled over and over again down to the parts per billion level of ...

Industrial Noise Control Products

by NEVA Associates     Office in NORTH CAROLINA (USA)

NEVA Associates has extensive experience in mitigating noise from a specific source as well as using engineered noise control systems to permit companies to eliminate 'Hearing Conservation Programs'. Acoustic materials suitable for all environments are available, from clean rooms to offices to manufacturing plant environments. NEVA will visit your ...

HORIBA - Model APSA-370 - Ambient Sulfur Dioxide Monitor

by HORIBA Europe GmbH     Distributor in NORTH CAROLINA (USA)

The APSA-370 is a device for the continuous monitoring of atmospheric SO2 using UV fluorescence. The APSA-370 employs an proprietary, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry-method, due to its minimal maintenance requirements capability of continuous monitoring and instantaneous ...

DryCat - System for Odour Control

by ERG (Air Pollution Control) Ltd     Distributor in NORTH CAROLINA (USA)

ERG's designers can match the air extraction rate and odour loading of each part of a sewage treatment plant to the odour control required for that area. Combining the basic building blocks of CIFs (catalytic iron filters), biofilters/bioscrubbers and dry media filters, and using intelligent design to look at the site as a whole, ERG's DryCat ...

HORIBA - Total System Integration / Multiple Pollutants Monitoring

by HORIBA Europe GmbH     Distributor in NORTH CAROLINA (USA)

HORIBA designs, assembles, calibrates and tests complete integrated systems for simultaneously measuring multiple pollutants. A system for monitoring five pollutants can typically fit into one 19-inch rack. Rack-mounted systems can be installed in equipment rooms, stand-alone shelters, trailers, vans, large trucks, or aboard vessels. HORIBA can ...

V-Centrif - Multistage Centrifugal Variable Speed Blower Package

by Ingersoll-Rand Air Solutions Hibon     Distributor in NORTH CAROLINA (USA)

The new Ingersoll Rand HIBON V-CENTRIF model combined with the synchronous motor technology and variable speed drive have significantly better efficiencies throughout the speed range for quantifiable energy savings. 

Airborne Particle Counter - Model LAP 340 - Clean Room Particle Counter

by Topas GmbH     Distributor in NORTH CAROLINA (USA)

The particle counter LAP 340 is an device for measuring the number and size of particles in air streams and gaseous media. It is identical in construction with Abacus mobil air and is built by Klotz GmbH on behalf of Topas. The measuring system is suitable for stationary as well as mobile use. The device is especially suitable for clean room ...

Model AC600 - Chemical Fume Hoods

by AirClean Systems     based in Creedmoor, NORTH CAROLINA (USA)

Designed to provide a low cost chemical hood solution for protection of the operator and environment from toxic vapors, gases, fumes, and particulate. The AC600 Series ductless chemical workstation features the use of molded thermoplastics configured for a variety of common applications.

MercSampler - Model XC-6000EM - Automated Console for Paired Hg Sorbent Sampling

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

XC-6000EM Automated Console for Paired Hg Sorbent Sampling. Features Proportional Valves w/Mass Flow Sensors, Pressure Transducers, DGMs w/Optical Encoders, Diaphragm Pumps. Ethernet/Modbus for DAS Interface and/or other Ethernet devices, USB Interface, 120VAC With Wired Router. (Laptop sold separately).

MercSampler - Model XC-6000EM-V - Automated Console for Paired Hg Sorbent Sampling

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

XC-6000EM-V Automated for Paired Mercury (Hg) Sorbent Sampling. Proportional Valves w/Mass Flow Sensors, Pressure Transducers, DGMs w/Optical Encoders, Diaphragm Pumps. Ethernet/Modbus for DAS Interface and/or other Ethernet devices, USB Interface, 220VAC With Wired Router. (Laptop sold separately).

Need help finding the right suppliers?

Let the XPRTs do the work for you