Radiello Air And Climate Equipment In Pennsylvania
-
Manufactured by Sigma-Aldrichbased in USA
A polypropylene protective outdoor shelter is available for housing up to four Radiello samplers during outdoor/ambient air sampling. The shelter allows for adequate ventilation while simultaneously protecting the samplers from harsh weather conditions. The shelter can be mounted to a variety of fixtures including lamp posts, traffic lights, and telephone poles of various diameters. The shelter ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Cartridge Adsorbents for sampling anaesthetic gases/vapors, matrix SS net with mix of mol sieve and activated charcoal (30-50 mesh), pk of ...
-
Manufactured by Sigma-Aldrichbased in USA
Includes one standard Radiello vertical adapter (RAD122) for each thermometer, configured for standard use, pk of 3. Uptake rates are dependent on temperature; therefore, concentration values obrtained during samplng will be more accurate if precise temperatures are recorded during sampling. Note that temperature variations of up to 4-5 °C can be observed from one area of an urban population ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Sigma-Aldrichbased in USA
Uptake rates are dependent on temperature; therefore, concentration values obrtained during samplng will be more accurate if precise temperatures are recorded during sampling. Note that temperature variations of up to 4-5 °C can be observed from one area of an urban population to ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Filtration Kit pk of 20. The filtration kit consists of graduated polyproylene syringe barrels and 13 mm diamater syringe filters with 0.45 μ,m porosity. The filtration kit is ideal for filtering aqueous samples prior to reversed-phase HPLC and ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Cartridge Adsorbents for sampling ozone (O3), matrix microporous PE tube with 4,4'-dipyridylethylene coated silica, pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Cartridge Adsorbents for sampling ammonia (NH3), matrix microporous PE impregnated with phosphoric acid, pk of ...
-
Manufactured by Sigma-Aldrichbased in USA
This kit was developed for sampling of nitrous oxide, isofluorane, ethrane, halothane, and sevorane in surgical theaters. Parts for one complete sampler are packed separately in one sealed and sterile bag. Pack of 10 sterile ...
-
Manufactured by Sigma-Aldrichbased in USA
The diffusive bodies are designed to house Radiello cartridge adsorbents during sampling. The diffusive bodies are threaded at one end for easy attachment to the Radiello triangular support plate. Unlike most of the cartridge adsorbents, the diffusive bodies are reusable and can be cleaned with a mild detergent between use. The diffusive bodies will collect dust (especially during outdoor ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Diffusive Bodies white, configured for general use, pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Cartridge Adsorbents for sampling BTEX and VOCs (CS2 Desorption), matrix SS net (100 mesh, 5.8 mm diam.), activated with activated charcoal (30-50 mesh), pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Cartridge Adsorbents for sampling phenolic compounds (thermal desorption), matrix SS net (100 mesh, 4.8 mm diam.), 250 mg Tenax-TA (20-35 mesh), pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Cartridge Adsorbents for sampling HCl, matrix SS net with silica gel (100-400 μm particle size), pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
The Radiello ready-to-use (rtu) Diffusive Samplers come pre-assembled with the cartridge adsorbent pre-sealed within the diffusive body using a polycarbonate screw-thread cap. To avoid premature sampling, the entire unit (diffusive body plus pre-sealed cartridge adsorbent) is enclosed within an airtight polypropylene (PP) container. Just before use, the unit is removed from the PP container, and ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello ready-to-use Diffusive Sampler for sampling BTEX and VOCs (Thermal Desorption), pk of ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Vertical Adapter non-threaded for ready-to-use samplers, pk of 20. For personal sampling (breathing zone assessment) a vertical adapter is available to position the Radiello diffusive body vertically on the Radiello triangular support ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Cartridge Adsorbents for sampling hydrogen sulfide (H2S), matrix microporous PE coated with zinc acetate, pk of 20. ...
-
Manufactured by Sigma-Aldrichbased in USA
Radiello Cartridge Adsorbents for sampling aldehydes, matrix SS net with 2,4-DNPH coated Florisil, pk of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you