HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5` Minimum for inner Diameter Filter Outer Diameter: 20` Maximum for outer Diameter Filter Height: Up to 32` High – closed one end or open at both ends (Other sizes Available – Contact Mfg. For Details) Injection Cleaning System HOW THE INJECTION SELF-CLEANING SYSTEM (ICS) WORKS The Injection Self-Cleaning System releases compressed shop air through a rotating air jet that is driven up and down in a spiral motion inside the filter cartridge. In order to maintain the cabinet clean, an air pu
By DiversiTech Inc based in Montreal, QUEBEC (CANADA).
Flue Gas Desulfurization (FGD) involves the removal of sulfur dioxide and other acids from flue gases. Typical sources of acid gases include fossil fuel boilers, waste combustors, and other industrial applications such as refining and smelting. The Macrotek wet and dry FGD systems can achieve over 99% acid removal by using a variety of reagents, including caustic, sodium carbonate, lime and limestone, and waste alkaline solids or liquids.
By Macrotek Inc. based in Markham, ONTARIO (CANADA).
Removal of particulate, acid gases and NOx emissions from glass furnaces. Particulate control on glass and ceramic material dryers and furnaces.
By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).
Within the nuclear industry there are ongoing operational challenges and potential hazards associated with environmental emissions and the protection of the workforce, such as high temperatures, high radioactivity, high solids loads and chemically aggressive environments. Therefore the industry demands exceptional levels of technical expertise and quality, in conjunction with specific skills to solve many of its most intractable problems.
By Porvair Filtration Group based in Fareham, UNITED KINGDOM.
Problem: Heat exchanger systems lose efficiency when deposits build up in, and on, tube bundles. High-pressure water jetting cleans both I.D. and O.D. very effectively, but manual methods clean a limited area at a time and expose operators to strain and risk.
By NLB Corp. based in Wixom, MICHIGAN (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you