Regenerative Thermal Oxidation (RTO) Equipment For Air And Climate In Turkey
-
Manufactured by Dürr Systems, Inc.based in USA
The patented technology of thermal oxidation for siloxane containing gases. During the oxidation of siloxane-laden exhaust, silicon dioxide (SiO2) will be created. This tends to be very sticky and fluffy in nature and typically results in clogging of the heat exchanger media in regular RTO systems. DeSiTHERM™ avoids this problem via continuous cleaning of the special ceramic heat ...
-
Manufactured by Muntersbased in USA
Munters zeolite rotor concentrator is integrated with a direct gas-fired air heater to provide the necessary heat for rotor regeneration. Solvent laden air is drawn through the zeolite rotor concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden zeolite into a regeneration zone where heater air is used to desorb the VOCs forming a highly ...
-
Manufactured by Dürr Systems, Inc.based in USA
Sorpt.X SB biogas purification systems use only water to remove CO2, H2S, and light siloxanes from digester, wastewater treatment, landfill, or other biogas streams. Sorpt.X SB systems capture more than 98.5 percent of the methane and purify it to pipeline quality natural ...
-
Manufactured by Dürr Systems, Inc.based in USA
RCO (regenerative catalytic oxidizer) systems combine the advantages of regenerative heat exchangers with those of catalytic oxidation. They are used to reduce pollutant levels in exhaust air that is not heavily contaminated and to minimize ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X RL is a unique regenerative thermal oxidizer with a rotary distributor valve that is capable of removing more than 99% of volatile organic compounds (VOCs), hazardous air pollutants (HAPs), and odors from industrial exhaust gas flows. The Oxi.X RL is based on the thermal ...
-
Manufactured by Brofind Spabased in ITALY
These oxidizers, equipped with regenerative heat exchangers, are characterised by high thermal efficiency and, in some cases, allow the oxidation process to be ...
-
Manufactured by Dürr Systems, Inc.based in USA
The most universally-used thermal oxidation technology with lowest operating costs owing to integrated heat recovery. This is achieved via batch usage of at least two regenerator chambers filled with ceramic heat storage media. These are used to preheat the waste gases and to recover the energy from the combustion process. A burner is installed for the start-up. The most popular sizes of ...
-
Manufactured by Dürr Systems, Inc.based in USA
Regenerative thermal oxidation (RTO) is used in many different industry sectors to purify exhaust air containing solvents and odors. This highly efficient regenerative thermal process contributes significantly toward environmental protection. The Oxi.X RA RTO series is especially suited to large exhaust air flow rates, high exhaust air temperatures and very low to high pollutant concentrations. ...
-
Manufactured by Dürr Systems, Inc.based in USA
For low-flow process applications, the Oxi.X RM RTO redefines the economics of clean air compliance compared to other VOC control technologies typically deployed in high-flow process ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X RC regenerative thermal oxidizer (RTO) from Dürr delivers simplicity and cost-effectiveness. The two-chamber, single-vessel system delivers 99+% VOC destruction and thermal efficiencies up to 97%. When it comes to VOC abatement and managing hazardous air pollutants (HAPs), the Oxi.X RC RTO provides exceptional operating economy. For many applications, the Oxi.X RC RTO will run in a ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Dürr Oxi.X RV is a unique, single-bed, flameless regenerative thermal oxidizer (RTO) in a compact, modular design with low running costs for VOC abatement and controlling hazardous air pollutants (HAPs). The system combines high VOC destruction, simple design, reliability, and superior energy efficiency. Our Oxi.X RV was formerly known as ...
-
Manufactured by Dürr Systems, Inc.based in USA
Regenerative thermal oxidation (RTO) is used in a variety of industry sectors to purify exhaust air containing solvents and odors. Highly efficient regenerative thermal processes contribute significantly toward environmental protection. The Oxi.X RE RTO systems are designed for low and medium pollutant concentrations. Their key features include an excellent thermal efficiency of up to 97%, ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator/Oxidizer Systems are the leading technology for cost-effective abatement of VOCs (VOC abatement). With hundreds of systems currently in service, Munters installed base includes some of the world's most respected companies in semiconductor manufacturing, automotive and aerospace industries. Munters Zeolite Concentrators/Oxidizer can achieve destruction and ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X RP RTO from Dürr is a modularized multi-canister oxidizer offering a highly flexible design that makes it appropriate for many applications where volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) must be managed, and odor control requirements must be ...
-
Manufactured by Muntersbased in USA
The most fuel efficient configuration is to integrate Zeolite rotor concentrators with a Regenerative Thermal Oxidizer (RTO) for VOC destruction. Dual Chamber RTOs with 95% primary heat recovery and flameless Natural Gas Injection (NGI) can operate autothermally with highly concentrated VOC streams from concentrators. High airflow applications such as automotive and aerospace finishing take ...
-
Manufactured by Dürr Systems, Inc.based in USA
Regenerative thermal oxidation (RTO) is used in a variety of industry sectors to purify exhaust air containing solvents and odors. Highly efficient regenerative thermal processes contribute significantly toward environmental protection. The RTO systems in Dürr’s Oxi.X RK series are designed for low and medium pollutant concentrations. Their key features include an excellent thermal ...
-
Manufactured by Nuova Idropress S.p.Abased in ITALY
The Vertical Block Moulding Technology A direction opened by Nip way back in 1971 ! Suitable for Densities of 6 ÷ 80 kg/m³ (0.37 ÷ 5.0 lb/ft³) For Block size between 1,0 x 0,5 x 1,0 m (40 x 20 x 40 in) and 8,0 x 1,4 x 2,6 m (315 x 55 x 102 ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's regenerative thermal oxidizers (RTO) are designed to provide maximum thermal efficiency while maintaining effective VOC/HAP. AEREON's RTOs are equipped with engineered high efficiency heat recovery beds for high heat recovery thus operating on very low fuel consumption. These systems are used in low solvent loading with high exhaust flow rates. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you