Scrubber Systems Equipment For Air And Climate Available In Uruguay
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The High purity NitroGen series NG EOLO produce laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders. The HG EOLO removes oxygen from air to less than 10 ppm and HC pollutants to less than 0.1ppm (if ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The High purity NitroGen series NG RACK 5U produce laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders. The NG RACK 5U removes oxygen from air to less than 1 ppm and HC pollutants to less than 0.05ppm ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and air inlet louvre section ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by Jenfitch INC.based in USA
JC 9465 can effectively remove biofilm from potable water distribution systems, cooling water systems, fruits & vegetables, oil & gas producing wells, and air scrubbing systems. JC 9465 eliminates the EPS (extra polymeric substance) that prevents disinfectants from killing pathogens. By simply using JC 9465 to raise the ORP, JC 9465 will dissolve the biofilm and prevent its reappearance. ...
-
PremiumManufactured by ENVEAbased in FRANCE
TDL monitor for in-situ non-invasive measurement of NH3 & H2O, HCl & H2O, HF as well as low or high concentrations of CO and O2 in process or CEMS applications. The Tunable Diode Laser Spectroscopy (TDLS) is the perfect technology to use when you are looking for a selective measurement and a fast response time on some gas components as NH3, HCL, HF or even O2 when conditions are too ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
NG SIRIO produces laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders. The NG SIRIO removes oxygen from air to less than 5 ppm and HC pollutants to less than 0.1ppm (if the optional scrubber is ...
-
PremiumManufactured by For.Tec. Forniture Tecnologiche S.r.l.based in ITALY
Our waste incinerators mod. ECOTEC are ovens with a static chamberdesigned for the thermo destruction of waste having high average lower calorific value ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications. Advanced sensor design includes automatic drift (zero and span) ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 822 SSdhr analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 822 SSdhr is modular designed and capable of directly and simultaneously measuring NOX in rough samples from two hot and moist sources without additional gas preconditioning unit. The new and intuitive graphical user interface also individually ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
BGE2 by ELI BioScicnces is a blend of humates and humic substances and beneficial bacteria which promotes enhanced microbial oxidation of difficult and slow-to-de-grade organic waste matter, resulting in a significant increase in biomass activity in degrading waste organic ...
-
PremiumManufactured by ENVEAbased in FRANCE
Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The High purity NitroGen series NG RACK 7U produce laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders. The NG RACK 7U removes oxygen from air to less than 1 ppm and HC pollutants to less than 0.05ppm ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1100 Zero Air Generator provides Hg free air for up to two Model 2537 Mercury Vapor Analyzers. Using an included communication cable, the Model 1100 will only produce zero air when needed by the Model 2537 analyzer, greatly increasing the lifespan of the zero air filters. The Model 1100 eliminates the need of compressed gas cylinders of Ultra High Purity (UHP) zero air. This is ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by Sauereisen Inc.based in USA
FibreCrete - AR 206 is a fiber-reinforced, chemically-resistant, 100% solids, epoxy lining system used to protect concrete and steel tanks, scrubbers, ductwork and other vessels from abrasion and chemical and physical abuse. The interlocking fiber matrix of FibreCrete systems exhibit outstanding flexural and tensile strengths. Fibrecrete AR 206 offers excellent resistance to abrasion, heat and ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The nCLD 844 Mhr analyzer is the next generation in two-channel high precision nitrogen oxide measurement. Unique in speed and reliability, the nCLD 844 Mhr is modular designed and capable of simultaneously measuring NO, NO2 and NOX from hot and humid gas sources without additional cooler. The new and intuitive graphical user interface “GUI“ also individually displays and connects to ...
-
PremiumManufactured by General Oceanics Inc.based in USA
Kit, Scrubber & Desiccant Tube LICOR 7000. Also requires Magnesium Perchlorate and Ascarite II or (Soda Lime). Part number: 9960-093. ...
-
PremiumManufactured by ENVEAbased in FRANCE
The DM 170 is designed to comply with the TÜV suitability testing scheme to EN 15267 and for measuring dust concentrations in a wide range of industrial ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you