Selective Catalytic Reduction (SCR) Equipment For Air And Climate Available In Vatican City
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Catalytic Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions at significantly lower temperatures than thermal oxidation technologies through the use of ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
DPF/SCR &ASC/DOC System Stationary Source ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by Lindner-Recyclingtech GmbHbased in AUSTRIA
Powerful, Compact and Versatile: Flexible, powerful, economical. Our Urraco 75 gives you all the advantages of mobile shredding while being extremely compact. This all-rounder shreds even difficult materials with its robust design and powerful engine. Depending on the degree of mobility needed, the machine is available in two chassis versions: either with a wheel axle and tow bar, suitable for ...
-
PremiumManufactured by Lindner-Recyclingtech GmbHbased in AUSTRIA
The new Urraco 4000 models tick all the boxes: tried-and-tested quality paired with maximum availability and continuously high output. The Urraco 4000 series, Lindner’s new mobile shredder generation, leaves nothing to be desired in terms of mobility and the excellent accessibility to the maintenance points and the drive. The result: shorter downtimes, improved productivity and consistently ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Ammonia is a gas that easily dissolves into water, there are several common detection methods,but ammonia is toxic and corrosive, the current measurement mainly uses the TDLAS direct measurement method. TDLAS is essentially a spectral absorption analysis technology, which uses the selective absorption characteristics of gas molecules for specific wavelength lasers, and analyzes the changes in the ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
With ever tightening regulations limiting the amount of NOx, CO and VOCs that can be emitted, you can’t afford to have any bypass leakage threaten your operation. The best catalyst in the world is ineffective if pollutants do not come in contact with the coating. But the housing that holds the catalyst has to be user friendly and yet capable of giving years of service in some of the most ...
-
Manufactured by Ashtech India Private Limitedbased in INDIA
As Ashtech AtBlue® is not-hazardous and non-toxic, it will not harm the user or environment. In any case where Ashtech AtBlue® comes into contact with the skin, wash with soap and rinse with plenty of water. If ingested, do not induce vomiting and drink plenty of water. If inhaled, move away to a place with fresh air. If Ashtech AtBlue® gets into your eyes, remove any contact ...
-
Manufactured by CSM Worldwide, Inc.based in USA
CSM has developed the REDOx™ system, which consists of a unique combination of catalytic oxidation and SCR to achieve the best of these two technologies. In many cases, catalytic oxidizers can be retrofitted to achieve NOx reduction or converted to a REDOx™ ...
-
Manufactured by Ceram Austria GmbHbased in AUSTRIA
CERAM produces plate catalysts for use in the energy industry. The catalyst material, which mainly consists of titanium dioxide, tungsten and vanadia, is applied to a stainless steel substrate and subsequently calcined. Plate-type catalysts are particularly suitable for applications with very high ash fuels (> 15 to 25%) or for other applications in which the fly ash is prone to cause clogging ...
-
Manufactured by AirProtekt Limitedbased in UNITED KINGDOM
AirProtekt supplies either the complete Selective Catalytic Reduction (SCR) package or the SCR catalyst for control of NOx emissions. The catalyst technologies are all well proven and supported by the highest manufacturing and quality control standards from one of the leading catalyst manufacturers in the world. The AirProtekt nitrogen oxide (NOx) removal process is a Selective Catalytic ...
-
Manufactured by Microone Co., Ltd.based in SOUTH KOREA
Most of the nitrogen oxides emitted are in the form of NO and are converted to N2 and H2O by reacting with the reactant while passing through the catalyst at an operating temperature of 200~400?. Here, in this temperature range, the reactant hardly reacts with O2, etc., but reacts selectively with NO, so it is called “selective catalytic reduction”. Ammonia is used as a reactant. ...
-
Manufactured by DEUTZ AGbased in GERMANY
Water-cooled 4 or 6-cylinder inline engines with turbocharging and charge air cooling. The powerful DEUTZ Common Rail (DCR®) injection system and the electronic engine control with intelligent link to the drive management ensure optimum engine performance at low fuel ...
-
Manufactured by Luxfer MEL Technologiesbased in UNITED KINGDOM
The field of Autocatalysis is very much legislation driven and this varies significantly dependent upon geographical location. This results in the need for advanced materials to meet the performance requirements, particularly after accelerated ageing ...
-
Manufactured by AirProtekt Limitedbased in UNITED KINGDOM
AirProtekt supplies either a complete Non Selective Catalytic Reduction (NSCR) package or the NSCR catalyst for control of NOx (including N2O) emissions in reduced oxygen air stream. The catalytic reaction is based on the reaction between nitrogen oxides and a fuel to give nitrogen and water. The reducing fuel is generally chosen by site availability and price (typically natural gas, light ...
-
Manufactured by EnviroExperts Italia Srlbased in ITALY
The SCR DeNOx reactors Deparia are particularly suited to the removal of NOx contained in the emissions from internal combustion engines Diesel cycle or the Otto cycle, or from boilers or ...
-
Manufactured by Johnson Mattheybased in UNITED KINGDOM
The SCRT system is more than simply a combination of a CRT system and an SCR system. In this integrated design, the CRT performs two functions: it gives excellent conversion of CO, HC and PM, and it enhances the NO2 content of the gasses that pass into the SCR system. By optimising the gas mix supplied to the SCR catalysts in this way, excellent NOx conversions are also ...
-
Manufactured by Wabash Power Equipment Companybased in USA
Our trailer-mounted saturated boilers are engineered for maximum efficiency. Wabash Power has teamed up with Nebraska Boiler for many years to provide you with equipment that: Provides the most precise steam capacity. Maintains high fuel efficiency. Exceeds environmental requirements. Offers Flexibility – our units can be lifted off their trailers without building a steel ...
-
Manufactured by Lummus Technologybased in USA
Lummus Technology designs and supplies DeNOx units, also known as selective catalytic reduction (SCR) units. The SCR unit can be incorporated in a new design, retrofitted in an existing heater or installed during a heater revamp. ...
-
Manufactured by GEA Bischoff GmbHbased in GERMANY
For the denitrification of waste gases from glass furnaces or fluid catalytic crackers (FCC) plants GEA Bischoff offers the SCR DeNOx process. Selective catalytic reduction (SCR) is considered the most efficient commercially proven method of removing nitrogen oxides (NOx) from off-gases. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you