Smoke Monitoring Applications available in Jamaica
-
Premium
Smoke generator device for clean room solutions
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for hot fire training
Concept's ViCount smoke generators are installed throughout the world in quality hot fire training centres - providing the most realistic artificial smoke effect possible. They are also used to add smoke during carbonaceous burns. The majority of fire training centres and schools use gas to replicate the appearance and heat of a real fire but one thing gas doesn't produce is smoke! The ViCount range of oil-based smoke generators from Concept produces a smoke with a temperature resistance up to 200C, so realism can ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for leak testing & building envelope testing
Smoke is the perfect medium for discovering where leaks are and how big they are! Filling a 'leaky' building, ductwork, pipes, aircraft or containment area with smoke and ideally adding a small amount of pressure to the area being tested, will result in a visible discharge of smoke and, simply put, the greater the volume of smoke, the bigger the ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for oil mist generation
Concept’s OMG is used by many of the worlds leading specialists in Oil Mist Detection including Specs, Dr Horn , Honeywell, Kidde, Valcom, Daihatsu, Schaller and ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for building envelope, energy studies & air tightness testing
The air tightness or leakage rate of a building is the uncontrolled flow of air through holes, gaps and cracks in the fabric of a building, which may not be detectable simply by looking at the outside of the building. Filling a building or void with smoke and pressurising that volume, will result in a visible discharge of smoke from any problem areas. Smoke is the perfect medium for discovering where leaks are and how big they ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for wind tunnel studies
For producing a point source of smoke in a wind tunnel environment, Concept have the Aerotech smoke system, with a heated tip on the end of a thin wand. For seeding a wind tunnel for LDA/PVA type work the ViCount 1300 system is normally supplied. This can produce either water or oil based smoke with minor re-programming, so it is a very adaptable solution. The ViCount is such a versatile machine, that its capable of everything from seeding the world’s largest wind tunnel (NASA AMES) through to producing fine ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for fire training, emergency evacuation & BA training
The Fire Training Range, designed and manufactured by Concept, has been developed to add realism to training scenarios or any type of fire safety training. For complete portability, unbeatable reliability and quality smoke output, the Colt 4 Turbo is in a class of it's own. For large scale applications the ViCount is the ultimate choice for fire training. With almost 50 years experience in the generation of artificial smoke for fire brigades, Concept are in an unrivaled position to supply the equipment and advice ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for maritime shipboard fire training
A fire at sea can be devastating. Ensuring that crews are trained in safe but highly realistic conditions can help them tackle a real fire with greater speed, efficiency and confidence - minimising the damage to the ship, its cargo and of course risk to ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for PPV & impulse ventilation testing
When water-based artificial smoke is introduced into a rapidly moving air stream, the particles that make up the artificial smoke evaporate much more quickly than they do in a static environment. So if you are looking to produce an artificial smoke that better represents the smoke created by a real fire, we would always recommend the ViCount smoke generator, the smoke from which is virtually unaffected by fast moving air streams. Used world wide PPV training centre's and to test impulse ventilation systems. A Home ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator devices for lev testing, spray booth clearance testing & air tracing
For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of 'clearance times' for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for smoke detector testing
Concept smoke systems are used throughout the world for testing smoke detectors of all types. And by smoke detector manufacturers in their own testing facilities. Concept also supply specialist equipment for testing smoke detectors in commercial aircraft, with users including Boeing, Meggitt, Alcoa, Apache, Dassault Falcon and ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Smoke generator device for large scale external exercises and tunnel testing
Making smoke in a very open environment or external environment can be a challenging! An oil-based smoke generator, such as a ViCount system, can produce dramatically more artificial smoke than multiple water based systems. This is due to the fact that the smoke ViCounts produce, being oil-based, does not evaporate in the same way and speed that water-based smoke does. The smoke from a ViCount smoke generator will travel for 1000's of meters, compared to a typical water based smoke machine that may produce a ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Laser based remote sensing instruments for remote visibility / fog applications
Aerosol LIDARs can provide visibility measurement, including Slant Visual Range (SVR - visibility up the glide slope), Runway Visual Range (RVR), and Vertical Optical Range (VOR - visibility at the decision point). LIDARs offer remote detection, augmenting current sensors wherever visibility is an issue, including for airports, ports, and oil platforms. Using the same principle, they are also capable of detecting incoming ...
By Raymetrics S.A. based in Athens, GREECE.
-
Fire detection solutions for the oil rigs areas
The worse event that can befall on off shore oil rig is fire. The Model 125 is a smoke monitor designed to operate in hazardous areas, especially in oil rig air conditioning and ventilation ducts. The electronics are contained in an explosion proof container rated as EEX de II B T5; the sensing head uses fibre optic cables to transmit the near infra-red light to a reflector where it is returned to another fibre optic cable. The light level is then monitored by a photo-electric cell. The Model 125 gives an output ...
By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.
-
Water monitoring instruments for built environment
We recognise the potential for you to be able to integrate intelligent automation and remote access for the control of building security, heating, ventilation, air conditioning and lighting. That is why we are at the heart of the development of the machine-to-machine (M2M) ...
By Ovarro based in Eckington, UNITED KINGDOM.
-
Wireless Systems for Home Automation
In our modern life there is a constant demand to stay connected - we constantly collect data from the surroundings using smart wireless systems that transmit the information to our handheld devices. Monitor our home instruments is following the same approach and many companies have started to develop smart wireless systems for all sort of applications. Those systems are using sensors to monitor the light level, temperature, relative humidity, appliance performance, presence and even the lock on the front ...
By Sol Chip Ltd. based in Haifa, ISRAEL.
-
Particulate monitoring for continuous emissions
With the advent of specific process emission limits being defined, continuous particulate monitoring has become a regulatory requirement for many industries. smoke stack #1Particulate monitoring requires the measurement of the mass concentration of particulate matter in stack emissions to atmosphere. There is no known method of continuously measuring particulate concentration by direct measurement and therefore, all continuous particulate measurement methods are inferential. Each method involves the ...
By Dynoptic Systems Ltd - ACOEM Group based in Banbury, UNITED KINGDOM.
-
Marine emissions monitoring
In recent years, new regulations have been introduced governing emissions from ships. With the International Maritime Organization (IMO) adopting Annex VI of MARPOL designed to limit sulphur oxides (SOx), nitrous oxides (NOx) and particulate matter emissions, as well as introducing emission control areas (ECAs) to reduce emissions of those air pollutants further in designated sea areas, ship owners/operators can face hefty fines for failing to meet these new requirements on the “polluter pays” ...
By Dynoptic Systems Ltd - ACOEM Group based in Banbury, UNITED KINGDOM.
-
Tunnel solutions for the visibility monitor areas
The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is ...
By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.
-
Water monitoring instruments for communications & broadcast
Servelec Technologies provides highly configurable intelligent monitoring and automation technologies solutions for communications and broadcast applications. Our software and hardware systems are engineered to provide you with immediate notification of alarms and other live conditions, which help to reduce downtime and enable more efficient preventative maintenance ...
By Ovarro based in Eckington, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you