Only show results available in Virginia? Ok

SNCR Equipment

  • SNCR Systems

    Comprehensive modernization of power boilers in deep emission reductions of nitrogen oxides below 200 mg/Nm3 by using primary and selective non-catalytic reduction methods - SNCR. Ecoenergia introduces turnkey projects reducing emissions of nitrogen oxides.

    By ECOENERGIA Sp. z o.o. based in Warszawa, POLAND.

  • Flue Gas Treatment Products

    Redecam’s complete product portfolio, coupled with our experts’ technological know-how, allow us to tackle the most challenging flue gas treatment (FGT) issues, allowing you to reach your emissions reduction requirements in an efficient, cost-effective and rapid manner. Based on the required abatement percentage(s), we will design ...

    By Redecam Group S.r.l. based in Sesto San Giovanni MI, ITALY.

  • Oxidisers Regenerative Flameless + SNCR

    An innovative system, exclusively the result of research Deparia, turned to the field of cogeneration through MCI on biogas: total destruction of pollutant emissions and high efficiency heat recovery with a single installed system, a solution that allows you to comply with the emission limits in the most convenient and efficient as possible.

    By Deparia Engineering Srl based in Calolziocorte, ITALY. from Industrial Products Product line

  • NOxOUT and HERT - Urea SNCR Systems

    The NOxOUT SNCR Process is a urea-based Selective Non-Catalytic Reduction (SNCR) process for reduction of oxides of nitrogen (NOx) from stationary combustion sources. The process requires precisely engineered injection of stabilized urea liquor into combustion flue gas temperatures as high as 2500° F. Fuel Tech customizes the design and ...

    By Fuel Tech, Inc. based in Warrenville, ILLINOIS (USA). from Air Pollution Control Product line

  • FlowVision - Micro SNCR System

    The FlowVision Micro SNCR System is a compact cost effective solution for small scale boiler and incinerator applications. The system could also be tailored for other applications requiring low reagent flow. As with a conventional SNCR system, the Micro SNCR process involves injecting either an ammonia or urea based reducing agent into the flue ...

    By FlowVision A/S based in Odense N, DENMARK.

  • NH3 Flue/Exhaust Gas 300C Sensor

    The SenSiC NH3 sensor detects exhaust/flue gas ammonia levels down to 5ppm. The sensor thereby offers cost efficient, fast responding NH3 slip monitoring to optimize ammonia (urea) injection in SCR/SNCR systems. Thus efficient NOx reduction is achieved whilst avoiding excess ammonia slip, which otherwise would cause a shortened life of the ...

    By SenSic AB based in KISTA, SWEDEN.

  • Selective Non-Catalytic Reduction System (SNCR)

    The SNCR process involves injecting either an ammonia or urea based reducing agent into the flue gas of a industrial combustion source, where an optimum temperature window of between 850°C - 1050°C exists. The purpose of the reducing agent is to enable reduction of the NOx species. The resulting product of the chemical reaction is ...

    By FlowVision A/S based in Odense N, DENMARK.

  • Model SNCR+SCR - Hybrid Systems

    The SNCR + SCR Hybrid system utilizes the advantages of the SNCR system as well as those of the SCR concept. The objective of the hybrid system is to allow the SNCR section to operate at the top of the optimum curve to achieve maximize possible NOx removal, while NH3 slip is purposely kept high. The excessive NH3 slip allows for the installation ...

    By FlowVision A/S based in Odense N, DENMARK.

  • ROTAMIX - Model SNCR - Advanced Selective Non-Catalytic Reduction System

    ROTAMIX is an Advanced Selective Non-Catalytic Reduction (SNCR) system.  Air-boosted nozzles facilitate penetration of chemical reagents into the furnace more deeply than conventional SNCR systems, improving reagent mixing and efficiency, and reducing reagent costs for the client.

    By MOBOTEC based in Naperville, ILLINOIS (USA).

  • NeuStream - NOx Add-On - SN, High Sulfur/NOx

    Flue gas from coal–fired power plants typically contains NOx (nitrogen oxides) with varying concentrations of NO and NO2. Conventional control technology for nitrogen oxides includes selective catalytic reduction (SCR) and selective non-catalytic reduction (SNCR), where NOx is reduced to N2 and H2O with ammonia (NH3) injection. SCR operation ...

    By Neumann Systems Group Inc based in Colorado Springs, COLORADO (USA).

  • Biomass Fired Boiler

    BWE grate fired boilers are available in the range of 50 to 132 MW heat input. The boiler is a bottom supported, natural circulated drum type boiler, with membrane walls and hanging super-heaters. The combustion takes place on a water-cooled vibrating grate, controlled by a 3-zone combustion air system. A special designed heat displacement system ...

    By Burmeister & Wain Energy A/S (BWE) based in Kgs. Lyngby, DENMARK. from Other Products Product line

  • Model MIR FT - Full Extractive Continuous Measurement of Combustion Gases

    Full extractive continuous measurement of combustion gases: HCl, SO2, NO, NO2, N2O, CO, CO2, CH4, HC, TOC, NH3, HF, H2O. The most powerful spectroscopic measurement method available on the market. The Fourier transform analysis combines a large number of measured gases with high accuracy and selectivity.

    By Atmoservice based in Poznan, POLAND. from Emission Analyzers Product line

  • Non-selective Catalytic Reduction Systems

    Deparia, in addition to its known range of catalytic reactors, also offers an easier and less expensive for the removal of oxides of nitrogen, the non-catalytic SNCR systems. From the constructive point of view, the SCR and SNCR systems are very similar, with the obvious difference that in the latter there is the catalytic reactor, while the ...

    By Deparia Engineering Srl based in Calolziocorte, ITALY. from Industrial Products Product line

  • CCA - NOx Tempering System

    CCA’s patented NOx tempering burner technology is a front-end system that reduces NOx formation in the near-burner zone.

    By CCA Combustion Systems - a CECO Environmental Company based in Monroe, CONNECTICUT (USA). from Boiler NOx Reduction Product line

  • DYNOR - Non-Catalytic Reduction System

    DYNOR  is the answer to Europe’s tightened nitrogen oxide limits. Simple in design and easy to install, the non-catalytic DYNOR process closes the gap between the costly SCR process and the conventional SNCR process. It is an investment which pays off.

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from DeNox Systems Product line

  • Garioni Naval - Model HRSG & WHRB - Exhaust Gas Boilers

    Exhaust Gas Boilers HRSG WHRB EBG/OTSG; Building & Hospitals, Manufacturing Plants, Process Industries, Petrochemical Complexes, Pulp & Paper Plants, Utilities/Power Producers, Iron & Steel Mills, Tyre & Rubb er Factories, Chemical Industries, Sugar Refineries, Fertilizer Plants.

    By SVECOM PE Srl based in Montecchio, ITALY. from Exhaust Gas Boilers Product line

  • Air Pollution Control

    Baghouse Systems, Fabric Collectors, Bin Vents, Dry Electrostatic Precipitators, Wet Electrostatic Precipitators, Mechanical Collectors, Wet Scrubbers, Dry Scrubbers, RTO’s- Regenerative Thermal Oxidizers, TO’s- Thermal Oxidizers, Concentrators, Biofilters, SCR & SNCR Systems.

    By Air Techniques, Inc. based in Marietta, GEORGIA (US) (USA).

  • Caldyn - Model CSL - Two-phase Nozzles

    The nozzle CSL and the principle of atomization developed by CALDYN has been proven as avery economical spraying technology. Liquid and gas are mixed at low velocities in a mixing chamber and accelerated to the sonic velocity of the two phase mixture (patented in 1976). The atomization is achieved by the pressure jump at the outlet of the nozzle ...

    By Caldyn Apparatebau based in Ettlingen, GERMANY. from Atomizing Systems Product line

  • De-NOx Systems

    Also included within KC Cottrell's extensive portfolio are De-NOx systems which reduce harmful nitrous oxide gases. Together with our parent company, KC Cottrell, we are facing the pressing task of removing nitrous oxide (NOx) and other major pollutants, such as sulphuric acid, carbon monoxide and dioxin. The company is an experienced provider of ...

    By KC Cottrell, Inc based in The Woodlands, TEXAS (USA).

  • SAGEMIS - Model SNCR - Selective Non Catalyst Reduction Systems

    Selective Non Catalyst Reduction (SNCR) converts nitrogen oxides into diatomic nitrogen, N2, and water, H2O. The reaction is made through injection of reductant, urea or ammonia and has to take place into the combustion chamber of the boiler itself or into a combustion chamber dedicated to the DeNOx has the energy required for the reaction is ...

    By SAGEMIS International based in Vimercate (MB), ITALY. from NOx Reduction Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you