Stack Filtration Equipment For Air And Climate Available In Florida
-
PremiumManufactured by ENVEAbased in FRANCE
US EPA PS11 compliant ProScatter™ particulate CEM providing high quality emission measurement for low dust concentrations from industrial processes. Utilising the patented ProScatterTM Forward Scatter measurement technique for measuring particulate concentration levels, typically between 0.06 mg/m3 to 300 mg/m3, this measurement technique offers improved levels of performance which make the ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based Gross filter failure detector. Detects significant increases in particulate loading providing warnings of filter media degradation in baghouses and cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-Sensor Dust Monitor certified to category 1 under ATEX / IECEx designed for indicative emissions trending and measurement in challenging hazardous zone. Advanced Probe Electrification technology, perfectly adapted for particulate monitoring after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Method 17 Isokinetic Sampling System, featuring the XC-53 metering console, is ideal for collecting and determining in-stack particulate emissions from a wide variety of sources. Particulate emissions are commonly sampled from coal-fired power plants, cement kilns, asphalt plants, incinerators and industrial sources. Emissions data can be used for determining compliance ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM which meets US EPA PS-1 requirements for Opacity monitoring from combustion stacks. Robust multi corner cube reflector provides truer reflection of transmitted light compared to traditional “mirror type” reflectors providing greater confidence in measurement. ...
-
PremiumManufactured by ENVEAbased in FRANCE
MCERTS EN 15859 Filter Dust Approved Particulate monitoring system providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks after bag filters, cartridge filters, cyclones and process driers. Advanced Probe Electrification Multi-sensor dust monitor designed for high quality emission measurement in industrial stacks where regulatory approvals are not ...
-
PremiumManufactured by ENVEAbased in FRANCE
Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112 is an efficient, all heated, low pressure drop sample filter and interface for removing solids from a gaseous sample and supplying sample to up to 5 gas analyzers. It utilizes a permanent all stainless steel 2 micron mesh filter and all stainless steel valve in a thermostatically controlled oven to prevent the loss of high molecular weight hydrocarbons or condensation of water. The ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone Cross Stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. Used for emissions measurement (mg/m³) after electrostatic precipitators and baghouses or Process control applications. Advanced sensor design includes automatic drift (zero and span) ...
-
PremiumManufactured by ENVEAbased in FRANCE
TÜV approved DynamicOpacity™ particulate monitor for emission measurement of dust from large dry industrial processes including Baghouses and Electrostatic ...
-
Manufactured by Ram Environnementbased in FRANCE
VOLTA-RAM is based on the technology of electrostaic filters used and unanimously appreciated by industry. The electric forces are used to separate particles and lead dusts molecules to receiving electrodes by a negative ionisation effect. Easy to maintain with its adjustable system of pneumatic knocking, it benefits from the global expertise of SAMES in piloting the high voltage and provides ...
-
Manufactured by KASAG Swiss AGbased in SWITZERLAND
The closed system for maximum safety. Radium® horizontal plate filters are layer filters with a package of round, stacked filter elements in a closed and absolutely pressure-resistant container. They allow safe and hazard-free operation with toxic, flammable and aggressive ...
-
Manufactured by EcoSense International Inc.based in USA
The replaceable Baffle Buddy™ Cassette Filter contains ESI MZ Filter Media, a patented modified alumino-silicate media, which is designed to absorb cations and anions such as: chromate, selenite, sulfate, hydrocarbons (e.g. benzene, toluene, xylene), heavy metals (e.g. lead and cadmium), and various petroleum products from aqueous waste ...
-
Manufactured by Amtech LCbased in USA
Designed for Fine or Abrasive Particulate. The major obstacle to dust collection efficiency is re-entrainment, the refiltering of dust that has been stirred up prior to settling. The goal is to dislodge the dust from the filter and allow it to settle in the hopper. The ATV Series utilizes patented downflow/verticle technology to minimize re-entrainment and extend filter ...
-
Manufactured by Kleenoil USA Incbased in USA
The Kleenoil Bypass Filter Hydraulic Block is mounted to the bottom of the Kleenoil Bypass Filter System to convert the lower pressure bypass engine oil filter to a high pressure hydraulic fluid ...
-
Manufactured by Universal Analyzers - AMETEK, Incbased in USA
The Series 1000 Sample Coolers are our high capacity thermoelectric coolers. Providing a self-regulated 4.0°C dew point gas sample, the 1000 Series Coolers condense the water from a wet gas sample with a minimal loss of the water soluble gas fraction. This results from the unique design of the heat exchangers. The separation occurs in the impingers which have a highly polished cylindrical ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you