Stack Testing Applications in Chile
-
Premium
Marine monitoring solutions for the SO2/CO2/NOx monitoring
Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Air pollution, emission and process monitoring systems for minerals
ENVEA’s experience of working in the Mineral Industry has led to the development of an extensive range of unique ambient, emission and process monitoring solutions to suit often challenging process conditions. In addition to main stack emission monitoring and measurement, by closely monitoring process conditions such as solids flow, the measurement of material mass via non-intrusive, solid state powder mass measuring systems and proactive baghouse performance monitoring can improve process ...
By ENVEA Distributor in La Serena, CHILE.
-
Premium
Air pollution, emission and process monitoring systems for incineration
ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data from emissions and process monitoring provides valuable feedback on ...
By ENVEA Distributor in La Serena, CHILE.
-
Premium
Emissions Monitoring for Power Plants
Opsis offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been approved by the German TÜV and the U.S. EPA among ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Emissions Monitoring for Chemical Plants
The Opsis gas monitoring system is designed for monitoring in stacks and gas ducts in chemical industries, both in order to increase plant efficiency and to monitor emissions. The Opsis systems have been internationally approved by e.g. the German TÜV and the U.S. ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Emissions Monitoring for Steel Mills
Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Air pollution, emission and process monitoring systems for metals
ENVEA’s extensive range of ambient, emission and process monitoring systems are particularly suitable for use in the often harsh, high temperature and dusty environments found in the Metals Industry. A wide range of measurement technologies are available for monitoring process parameters such as the moisture content of fuels (coal), blast furnace efficiency, the continuous monitoring of sinter dust transfer and silo level indication. In addition, instruments to monitor and identify potential faults in dust ...
By ENVEA Distributor in La Serena, CHILE.
-
Premium
Air pollution, emission and process monitoring systems for power generation
ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements and ...
By ENVEA Distributor in La Serena, CHILE.
-
Premium
Air pollution, emission and process monitoring systems for chemicals
ENVEA’s long standing involvement with manufactures of powdered chemicals such as TiO2 and carbon black has led to the development of a wide range of ambient, emission and process monitoring systems designed to overcome often challenging monitoring conditions including acidic condensation and potential contamination. Approved measurement and monitoring systems not only protect our environment by meeting and exceeding regulatory requirements but also provide valuable feedback on process performance providing ...
By ENVEA Distributor in La Serena, CHILE.
-
Premium
Continuous emissions monitoring solutions for power plants
OPSIS offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been tested and approved by the German TÜV and the U.S. EPA among others, for the best performance and longest calibration ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Continuous emissions monitoring for aluminium smelters
Process control and emissions monitoring in an aluminium smelter is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Continuous Metals Stack Monitor (CEMs)
Cooper Environmental's Xact 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter ...
By Cooper Environmental / Sailbri Cooper Inc. Distributor in Nunoa, CHILE.
-
Premium
Raw-gas monitoring for scrubber optimizing
The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Air pollution, emission and process monitoring systems for agriculture
Working with the industry’s leading manufacturers enables ENVEA to understand specific environmental and process monitoring requirements and the ability to provide an extensive range of ambient, emission and process monitoring systems. A choice of measurement technologies monitor and control key areas of the process including storage, handling, drying activities and dust releases to atmosphere to meet and exceed regulatory environmental obligations and help improve process efficiency. ...
By ENVEA Distributor in La Serena, CHILE.
-
Premium
Emissions Monitoring
The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium ...
By OPSIS AB Distributor in Providencia, CHILE.
-
Premium
Process Flue Gas Monitoring for Combustion Optimization Application
Combustion in boilers, gas turbines, waste to energy, paper-mills, minerals, etc. | MIR 9000e Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization ...
By ENVEA Distributor in La Serena, CHILE.
-
Industrial monitoring solutions for the flow monitoring areas
Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be ...
By Codel - a Forbes Marshall company Distributor in Santiago, CHILE.
-
Process analyzers & instruments for flare stack BTU analysis
By AMETEK Process Instruments Distributor in Santiago, CHILE.
-
Stack emissions monitoring
Monitoring stack emissions is a fundamental requirement for most industrial processes. Our gas analysers, dust monitors and flow monitors are designed for a wide range of applications and can operate as a fully integrated system or as stand alone ...
By Codel - a Forbes Marshall company Distributor in Santiago, CHILE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you