industrial gas News
-
Coming on January 1st, 2016: HORIBA`s PX-375
Particular matter can be measured in mass, concentration and elemental composition by a single instrument, online and continuously. Therefore two different technologies are combined and compactly designed in one 19 inch case. Remote data monitoring and operation can be done by network connection. The measurement and determination of particulate matter suits for various applications: ambient air, ...
-
LumaSense Attending SOER’s Oklahoma Oil & Gas Expo
LumaSense Technologies, Inc., an Advanced Energy company, is exhibiting refining and petrochemical solutions October 11 at the Bennett Event Center in Oklahoma City, OK. Designed for experts to share their ideas and innovations for the oil and natural gas industry, the OK Oil & Gas Expo is an opportunity for industry professionals to network with leading companies like LumaSense and learn ...
-
Protea Heated Gas Sampling System
For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas instrumentation. The standard HSSM includes a bank of 4 heated solenoid valves with 1 common outlet, allowing each of the sample points to be ...
-
Hired emissions analyser checks gas rig in Burma
Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...
-
Gas Sampling Probes for Every Application
Gas sampling specialists JCT presents a complete portfolio of gas sampling probes with a new set of technical brochures available on the company’s website. Beyond the wide range of gas sampling probes for typical gas analysis applications like continuous emission monitoring (CEMS) JCT is well known for its flexibility in building reliable solutions also for demanding applications like NOx ...
-
New Webinar Now Available On Demand - Measuring Opacity and Particulate Emissions From Combustion Processes
View our webinar where we introduce the concepts behind opacity and particulate measurement, describe the key technologies and provide detailed insight into the requirements for a successful installation. An opacity monitor provides a simple and robust means for emissions monitoring in combustion processes, but under some conditions a particulate matter (PM) monitor may be necessary. Smoke and ...
-
Meet Gasmet at Achema 2018
ACHEMA is the world forum for chemical engineering and the process industry. It is held in Frankfurt 11-15 June. The main topics of this years exhibition are Biotech For Chemistry, Chemical and pharma logistics and Flexible production. We will be showcasing the following industry leading continuous gas emission monitoring solutions: CMM, the world’s best continuous mercury monitoring ...
-
Cement industry purchases to boost scrubber industry to $6.5 billion in 2012
The market for industrial stack gas scrubbers has historically been small compared to those used in coal-fired power plants. But, thanks to tough proposed regulations for the cement industry, the world industrial scrubber market is now forecasted to reach $6 billion in 2012. This is the latest forecast of the McIlvaine Company in Scrubber/Adsorber/Biofilter World Markets www.mcilvainecompany.com ...
-
ASTM D1607 - 91(2011) standard test method for nitrogen dioxide content of the atmosphere (griess-saltzman reaction)
Nitrogen dioxide plays an important role in photochemical smog-forming reactions and, in sufficient concentrations, is deleterious to health, agriculture, materials, and visibility. In combustion processes, significant amounts of nitric oxide (NO) may be produced by combination of atmospheric nitrogen and oxygen; at ambient temperatures NO can be converted to NO2 by oxygen and other atmospheric ...
-
Showcase
Biogas Moisture, Corrosion and Accuracy Issues Resolved With Rugged FCI Thermal ST100A Wet Gas Flow Meter
Featuring a rugged, highly accurate thermal dispersion flow sensor, the ST100A Flow Meter from Fluid Components International eliminates wet gas and entrained moisture issues affecting biogas measurement accuracy in wastewater treatment digester applications and landfill co-gen power systems, as well as providing down-the-pipe rain shielding in petrochemical refineries, power plants and other ...
-
GE Oil & Gas Expands Offshore Drilling Blowout Preventer and Remote Monitoring and Diagnostics Capabilities
Offshore Technology Conference (OTC): GE Oil & Gas (NYSE: GE) has expanded its suite of blowout preventer (BOP) and remote monitoring and diagnostic (RM&D) technologies for the offshore drilling industry. The newly launched, technology-intensive products will help offshore drillers increase equipment performance, safety and reliability and optimize operational ...
-
Analyzing waste gases during simulated Mars mission
As part of a project to measure the effects of long-term isolation on astronauts, small groups of individuals have been selected to live in a tiny ‘Habitat’ perched on the upper slope of a volcano in Hawaii. In doing so, the project team has contributed to the understanding of issues that would confront a manned mission to Mars. As part of the project’s research NASA’s ...
-
New CEMS catalogue: Continuous Emissions Monitoring Systems
With decades of industrial experience, the ENVEA Group designs and produces a full range of Continuous emissions monitoring systems (gas and dust analyzers, flue-gas flow and particulates monitors, dioxins samplers & mercury CEMS instruments, etc.) for emission regulatory compliance. Our systems are designed and developed as a complete turnkey solution. From sample extraction, through ...
By ENVEA
-
CEM India 2017
Environnement S.A together with its subsidiaries PCME Ltd, SWR Engineering and Cairpol, as leading manufacturers of complete continuous air pollution, in-stack emissions measurement systems, monitoring solutions for process optimization as well as related data acquisition and processing software look forward to participating at CEM India 2017. Booths 9&10 the Group will be demonstrating ...
By ENVEA
-
Environnement S.A cordially invites you at WFES 2016 in Abu Dhabi
Environnement S.A alongside our distribution centre and technical support Envirozone LLC for Middle East in UAE, QATAR & JORDAN invites you cordially to attend our booth during the World Future Energy Summit 2016, the world’s foremost event dedicated to renewable energies, energy efficiency and clean technologies. During this year’s conference, which will be held in Abu Dhabi, ...
By ENVEA
-
FCI’s MT100 Multipoint Flow Meters Improve Boiler Air-Gas Combustion Efficiency To Reduce Fuel Costs
San Marcos, CA—November 22, 2022—Oil/gas refinery and other process engineers will find the MT100 Series Multipoint Mass Flow Meter from Fluid Components International (FCI) provides the accurate air/gas flow measurements needed to optimize boiler performance in order to reduce expensive fuel gas consumption costs and polluting greenhouse waste gases. For example to operate a ...
-
A laser based game changer - First to measure five in one
A significant breakthrough at NEO Monitors research division, allows global industries to measure four gases and temperature with just one device. This cutting-edge instrument delivers vast benefits and reduced cost for industries requiring the most accurate analysis of processes. NEO Monitors’ LaserGasTM iQ² product is the first all-in-one tunable diode laser (TDLS) analyzer for ...
-
A Laser Based Gamechanger: First to Measure Five in One
A significant breakthrough at NEO Monitors research division, allows global industries to measure four gases and temperature with just one device. This cutting-edge instrument delivers vast benefits and reduced cost for industries requiring the most accurate analysis of processes. NEO Monitors’ LaserGas iQ² product is the first all-in-one tunable diode laser (TDLS) analyzer for ...
-
Environnement S.A has launched 8 new products at Pollutec
1. Air quality: ecodesign, operational cost reduction & best metrology, now for sales Leading player in the environmental monitoring, Environnement S.A has launched a new generation of eco-designed analyzers. Dedicated to the measurement of pollutants such as O3, CO and SO2 the e-Series analyzers O342e, CO12e and AF22e are QAL1 certified by the German TÜV and approved by the US EPA. A ...
By ENVEA
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you