Sulfur Dioxide (SO2) Applications in Brazil
-
Premium
Process Flue Gas Monitoring for Combustion Optimization Application
Combustion in boilers, gas turbines, waste to energy, paper-mills, minerals, etc. | MIR 9000e Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization ...
By ENVEA Distributor in Rio De Janeiro, BRAZIL.
-
Premium
Continuous emissions monitoring for glass manufacturing industries
Process control and emissions monitoring in a glass manufacturing plant is a challenge due to high temperature in the flue gas. The OPSIS DOAS system provides the glass industry with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method that uses an optical path to measure across the duct. A single OPSIS system will measure all relevant gas componensts such as NOX, SO2, CO, CO2, H2O, O2, and ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Raw-gas monitoring for scrubber optimizing
The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Marine monitoring solutions for the SO2/CO2/NOx monitoring
Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Ambient air quality monitoring solutions for urban air quality monitoring
To measure air quality in the ambient air is a challenge. The monitoring site needs to be representative and not dependant on changes in local traffic. A large number of gaseous components need to be measured with high accuracy and high ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Emissions Monitoring for Chemical Plants
The Opsis gas monitoring system is designed for monitoring in stacks and gas ducts in chemical industries, both in order to increase plant efficiency and to monitor emissions. The Opsis systems have been internationally approved by e.g. the German TÜV and the U.S. ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Analytical instruments for analyzing refinery products
Discover innovative application strategies for the fast and correct determination of element contents (carbon, nitrogen, sulfur, chlorine, metals and more) in a wide range of petroleum products, including source materials, process intermediates, additives, ultra-pure end products as well as distillation residues and other by-products. All methods are compliant with the most important industrial regulations (ASTM, EN, ISO, etc.) and can be applied in process control and adaptation, incoming goods and final products ...
By Analytik Jena - an EndressHauser Company Distributor in São Paulo - SP, BRAZIL.
-
Premium
Continuous emissions monitoring for brick plants
Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Continuous emissions monitoring solutions for mining & smelting
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Ambient air quality monitoring solutions for fence-line monitoring
The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Continuous emissions monitoring solutions for power plants
OPSIS offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been tested and approved by the German TÜV and the U.S. EPA among others, for the best performance and longest calibration ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Advanced resource recovery & purification solutions for H2S removal sector
BgPur is Eco-Tec’s proven H2S removal system for treatment of biogas from anaerobic digesters or landfills. The system is capable of treating biogas with H2S concentrations of a few hundred ppmv to over 30,000 ppmv (3%) while reducing the H2S to a just a few ppm to meet downstream requirements for power generation or heating fuel, or to be sold for pipeline or transportation fuel. The H2S is converted to solid elemental sulfur which has resale potential as a soil enhancement additive or easily disposed of as ...
By Kovalus Separation Solutions, Inc. Office in São Paulo, BRAZIL.
-
Premium
Emissions Monitoring for Steel Mills
Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Ambient stations for ambient air quality monitoring
Ambient air monitoring involves the measurement of 'representative' air in urban, industrial and rural areas. These measurements are used to determine the human exposure to pollutants and can be combined with trace/background ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Continuous emissions monitoring for cement industry
Process control and emissions monitoring in cement plants, can be a challenge due to the dusty and corrosive environment. OPSIS provides an accurate system that will operate with high performance and a minimum of ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Ambient air quality monitoring solutions for street-level monitoring
To measure the air quality in a city is a challenge. A large number of gaseous components need to be measured with high accuracy. The monitoring site needs to be representative for the city and the system has to be easy to maintain and calibrate. The OPSIS open-path monitoring systems provide a flexible solution, giving the average concentration for an area. A single OPSIS system can measure all relevant gaseous components set by the authorities, such as NO, NO2, SO2, O3, BTX, ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Emissions Monitoring for Mining / Emissions Monitoring for Smelting
The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Insitu Flue Gas Desulfurization - DeSOx Analyzer
The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general ...
By Cerex Monitoring Solutions, LLC. Distributor in São Paulo - SP, BRAZIL.
-
Premium
Continuous emissions monitoring solutions for waste to energy plants
Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate. The OPSIS system is tested and approved to have the best performance and longest calibration intervals, and provides the waste to energy plant with an accurate analyser that will operate with a minimum of ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
-
Premium
Continuous emissions monitoring for sulphuric acid production plants
The process control of a sulphuric acid plant needs good and reliable detection of gas phase sulphur dioxide (SO2). To measure SO2 is a challenge due to the corrosive environment and high concentration of SO2. Several places in the process needs to be monitored and to transport the sample gas is difficult. A large dynamic range is needed as the SO2 concentration can vary between 15% volume and a few mg/m3. Most systems installed need a lot of maintenance, sometimes as often as every ...
By OPSIS AB Distributor in Rio de Janerio, BRAZIL.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you