Sulfur Dioxide (SO2) Equipment For Air And Climate Available In Egypt
-
ShowcaseManufactured by Umwelttechnik MCZ GmbHbased in GERMANY
Easy handling and individual customizations. With the analyser EasyCEM gases can be measured such as CO, CO2, NO, SO2, SF6, THC with the NDIR method or with PID , as welll as gases like NH3, HCl and CH4 with a TDLS (tunabel diode laser). By extending further modules with NDUV or electrochemical measuring principles, it is possible to measure gases like O2, O3 or NO2. The analyser is particularly ...
-
ShowcaseManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The UV-GAS-500 model gas analyzer is based on DOAS technology,able to measure the concentration of gases including SO2,NO2,NO,NH3,CL2,O3,H2S etc,It has features of high measurement accuracy ,outstandingreliablility,fast response time and wide applicable ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA-TOTAL is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. It is also able to remove other pollutant like Humidity, CO2, CO, NOx, SO2 and Hydrocarbons. Very small in size, the ZA-TOTAL can filter up to 30 L/min of compressed Air and can withstand a pressure up to 8 bar (115 PSI). The reduction of hydrocarbons, including methane, and ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Cold Vapor Atomic Fluorescence (CVAF) is a powerful technique based on detecting fluorescence light emitted by the sample. Below the principle of the technique is explained in a ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
With UV differential optical absorption spectroscopy (DOAS) analysis technology, it is mainly used in process gas control of the Claus industrial sulfur recovery process. The ratio meter measures the concentration of H2S and SO2 real-time, and calculates the molar ratio, then feeds back the signal to the control device that controls air intake to achieve feedback. It has significant advantages ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A compact, reliable multi-gas analyser for measuring flue gas emissions in processes burning natural gas and biomass. The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Acid Gas Scrubber neutralizes inorganic acids that often exist in a process exhaust stream or are created during the oxidation of air pollutants. The module can effectively scrub a variety of acids including Hydrogen Chloride (HCl), Hydrogen Bromide (HBr), Hydrogen Fluoride (HF) and Sulfur Dioxide ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
An autoGC-trap-FPD for low sulfur quantification. airmo S is a fully automatic isothermal gas Chromatograph for the analysis & monitoring of sulfur compounds with Sulfur Specific Detector. This solution is specific for application where low sensitivity on sulfurs must be reached. This auto GC uses a valve with 1 sample trap, and metallic capillary ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Odosense is an e-nose based odour monitoring system designed to monitor various odourful and toxic gases. Odosense continuously detects, measures and monitors the odourful gaseous contaminants. Oizom Odour Monitoring Solution comprises of a network of e-noses (OdosenseTM) positioned on the periphery of the site. By using external modules one can also monitor meteorological parameters like wind ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
Catalytic carbons are the newest class of activated carbons for odor control. These carbons also exhibit an enhanced capacity for H2S, but achieve this increased capacity differently than do caustically impregnated or blended carbons. Catalytic carbons convert adsorbed H2S into sulfuric acid and sulfurous acid, which is stored more efficiently on carbon than is H2S (but not as efficiently as ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
The use of lime for treating flue gases is a proven technology. Flue gas is generated from the thermal treatment process in Energy from Waste plants (EfW) and contains acidic gases such as hydrogen chloride, sulphur dioxide and hydrogen fluoride. The use of lime in the three main flue gas treatment processes of; dry, semi-dry and wet processes shows its flexibility and adaptability in its ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The AirGen series ZA TOTAL C HP is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2. ZA TOTAL C HP is available with a smart low noise built-in pistons compressor, 100% oil-free. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, ...
-
PremiumManufactured by DILO Armaturen und Anlagen GmbHbased in GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
AM-5100 is a portable SO2 analyzer adopts ultraviolet fluorescence technique and combines advanced micro processing technology, which could provide accurate and reliable SO2 detection at low level ppb~ppm.This SO2 gas analyzer can be applied to atmospheric monitoring and dilution-based CEMS monitoring ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EM-5P portable flue gas analyzer is developed on UV DOAS (Ultra Violet Differential Optical Absorption Spectroscopy) technology. It can be used to monitor SO2, NO, O2 and other gas in flue gas. The detection low limit can reach 0.1mg/m3. As per different field condition, multiple components can be measured at same time, also including temperature, pressure, flow, humidity and ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
Odosense Pro is an Ambient Odor Analyzer. Odosense Pro continuously monitors the odourful gases present in the ambient environment. Odosense Pro can monitor critical odorants such as SO2, H2S, NH3, CH3SH, TVOC, CH2O, NO2, Cl2, with a climatic condition like Temperature & Humidity. Odosense Pro comes with GPRS and Ethernet as primary communication protocols whereas it can also communicate ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The ULTRAMAT 23 is an innovative multi-component gas analyzer which can be equipped with the following sensors: IR detector for IR-active gases, UV photometer for UV-active gases, H2S sensor (electrochemical), O2 sensor (electrochemical or paramagnetic), and used accordingly in numerous applications and industries. The integrated automatic calibration function using ambient air provides the ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you