Sulfur Dioxide (SO2) Equipment For Air And Climate In Virginia
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Corrosion-Resisting Mortar 65 is a completely inorganic, potassium silicate base mortar for bonding acidproof brick or tile used in the construction of industrial chimneys, stacks, tanks, kilns and floors. 65 is a two-component material, consisting of a Powder and a Liquid, which are mixed together as used on the job. Mortar65 is applied by troweling in the same manner as ordinary ...
-
Manufactured by Muntersbased in USA
The streamlined separator profiles deflect the droplet laden gas stream; as a result the momentum of the droplets causes them to impinge onto the profile surface. The droplets coalesce together and form a liquid film, draining back down under the influence of gravity. Target applications FGD absorbers (Flue Gas Desulphurization) Vertical gas scrubbers Gas cleaning devices in waste incineration ...
-
Manufactured by IRFlex Corporationbased in USA
Chalcogenide glass is based on the chalcogen elements (sulfur, selenium and tellurium) with the addition of other elements such as arsenic, antimony, or germanium. It offers promising properties such as transmission in mid and far infrared regions of spectra, lower values of phonon energies, high refractive index and very large nonlinearities as compared to silica. Chalcogenide glass fibers are ...
-
Manufactured by Chemteqbased in USA
The Acid vapors Breakthrough indicator for Activated Carbon Absorbers and Filters is a colorimetric indicator that indicates the saturation and exhaustion of carbon absorbers and filters. The indicator is reliable and cost effect means for protection from exposure to toxic acid gases and vapors in the work place. The indicator change color from yellow to red when carbon absorbers and filters are ...
-
Manufactured by Chemteqbased in USA
The Acidic Vapors Breakthrough Indicator is qualitative (yes/no) colorimetric indicator of the end-of-service life of ductless hood filters. It is designed to provide real-time indication of the saturation and breakthrough of acidic vapors (e.g. acetic, hydrochloric, hydrofluoric, hydrogen bromide, hydrogen chloride, hydrogen iodide, nitric, nitrous, sulfur dioxide, trichloroacetic, ...
-
Manufactured by Muntersbased in USA
Two superposed units forming a diamond structure. Process designers have the possibility to extract two benefits from the configuration. First the system requires a single layer of support beams instead of two. Second, the total system height is maximum 2.6 m. Comparing the total required installation height of Design I and III the absorber height can be reduced up to 600mm without reducing any ...
-
Manufactured by IRFlex Corporationbased in USA
Beam combining devices are extensively used to achieve power levels that cannot be reached by the use of just a single laser. To achieve beam combination these devices commonly employ free-space optics like mirrors, gratings and lenses, which has issues such as thermal sensitive, vibration induced misalignment, complex packaging and bulky design. Fiber beam combining can provide the high power ...
-
Manufactured by Iatroscanbased in USA
The new model IATROSCAN MK6 with FPD (flame photometric detector) detects the hetero-atoms such as phosphorous and sulfur selectively. The simultaneous measurement by both FPD and FID (flame ionization detector) is possible. Organic compounds on the thin-layer are surely captured by means of two eyes of FID and FPD without omission. The addition of FPD to the former TLC-FID IATROSCAN with ...
-
Manufactured by Muntersbased in USA
One single stage or 2 superposed V shaped units on 2 support layers. Flushing systems are installed on either up- and/ or downstream side of the mist eliminators. Target applications are Flue gas desulphurization plants for processes with high turn down ratios, Exhaust air treatment plants, Waste Incineration plants and Inlet and exhaust scrubbers with high cleaning requirements. Available in ...
-
Manufactured by Muntersbased in USA
The system is typically installed in gas cleaning devices such as flue gas desulphurization absorbers and wet scrubbers. DV210 RF has several functions such as the protection of the downstream gas-gas heat exchanger (GGH) from droplets, the best available elimination of liquid carry-over escaping into the environment and finally the highest retention of liquid solvent avoiding losses during ...
-
Manufactured by Bacharach, Inc.based in USA
The PGM-IR offers superior performance and functionality for low ppm level leak detection of refrigerants, Carbon Dioxide, Nitrous Oxide or Sulfur Hexafluoride. A built-in library of 50 refrigerants enables the PGM-IR to accurately detect the smallest leaks at their source. The unit is immune to sudden changes in temperature or humidity and to over-exposure. The PGM-IR requires no zeroing of ...
-
Manufactured by Chemteqbased in USA
The Acid vapors Breakthrough indicator for Activated Carbon Absorbers and Filters is a colorimetric indicator that indicates the saturation and exhaustion of carbon absorbers and filters. The indicator is reliable and cost effect means for protection from exposure to toxic acid gases and vapors in the work place. The indicator change color from yellow to red when carbon absorbers and filters are ...
-
Manufactured by Chemteqbased in USA
The Acid vapors Breakthrough indicator for Activated Carbon Absorbers and Filters is a colorimetric indicator that indicates the saturation and exhaustion of carbon absorbers and filters. The indicator is reliable and cost effect means for protection from exposure to toxic acid gases and vapors in the work place. The indicator change color from yellow to red when carbon absorbers and filters are ...
-
based in USA
The MC-6410 Multi-Gas Monitor is a self-contained atmospheric monitoring solution in a rugged, NEMA 4X polycarbonate enclosure. Capable of monitoring multiple gas types simultaneously in dozens of unique configurations, the sensors operate at low current for increased energy efficiency. Offering a wide range of communications options, the MC-6410 has the ability to operate on multiple network ...
-
Manufactured by Muntersbased in USA
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers. Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the maintenance to a minimum. The gas flow charged with liquid droplets ...
-
Manufactured by Chemteqbased in USA
The Acid vapors Breakthrough indicator for Activated Carbon Absorbers and Filters is a colorimetric indicator that indicates the saturation and exhaustion of carbon absorbers and filters. The indicator is reliable and cost effect means for protection from exposure to toxic acid gases and vapors in the work place. The indicator change color from yellow to red when carbon absorbers and filters are ...
-
Manufactured by Chemteqbased in USA
The Acid vapors Breakthrough indicator inline is a colorimetric indicator that indicates the saturation and exhaustion of carbon absorbers and filters. The indicator is reliable and cost effect means for protection from exposure to toxic acid gases and vapors in the work place. The indicator change color from yellow to red when carbon absorbers and filters are saturated with acid gases and vapors ...
-
Manufactured by IRFlex Corporationbased in USA
Chalcogenide glass is based on the chalcogen elements (sulfur, selenium and tellurium) with the addition of other elements such as arsenic, antimony, or germanium). It offers promising properties such as transmission in mid and far infrared regions of spectra, lower values of phonon energies, high refractive index and very large nonlinearities as compared to silica. Chalcogenide glass fibers are ...
-
Manufactured by Muntersbased in USA
The DV 270 (T 271) droplet separator is a vane type separator for vertical flow. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the profiles, where they form a liquid film which is subsequently drained off as a ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
GC IPH is a bituminous coal-based activated carbon that is specially impregnated for the desulphurization of gases and the removal of all acidic contaminants such as hydrogen sulfide, hydrogen chloride, and mercaptans. This product comes in 55 lb ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you