We couldn't find any thermal oxidizers suppliers or service providers located in Kyrgyzstan
Here is a list of companies serving Kyrgyzstan
Thermal Oxidizers Manufacturers, Suppliers & Companies (Air And Climate) Serving Kyrgyzstan
-
Anguil Environmental Systems, Inc. is an environmental technology supplier headquartered in Milwaukee, WI USA with an extensive global presence, including offices in Asia and Europe. Anguil has been a trusted air and water solutions supplier for ...
Anguil - Rotor and VOC Emission Concentrator with Integrated Oxidizer
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound ...
CONTACT SUPPLIER -
Manufacturerbased in Richmond Hill, ONTARIO (CANADA)
ComEnCo Systems, Inc. was founded by Raymond Hsu who serves as the President of the company and is headquartered in Canada and China. ComEnCo stands for combustion, environmental and control systems which are the initial products the company offers. ...
ComEnCo - Thermal, Catalytic Oxidizers & RTO
ComEnCo Systems, Inc.’s Thermal and Catalytic Oxidizers enable manufacturers in process heating industries to eliminate industrial exhaust emissions (up to 99%) using the heat generated from the recuperative or regenerative heat exchangers ...
CONTACT SUPPLIER -
Manufacturerbased in La Habra, CALIFORNIA (USA)
Alliance Corporation is an air pollution control equipment manufacturer and service company specializing in Regenerative Thermal Oxidizers. Alliance Corporation is a low profile company dedicated to building the best Regenerative Thermal Oxidizers ...
BOXIDIZER - 3-Bed Regenerative Thermal Oxidizer
From a Standard 40’ ISO Cargo Container to Fully Installed and Oxidizing Your VOC’s in an Afternoon. The BOXIDIZER 3-bed by Alliance Corporation is our highest performance Regenerative Thermal Oxidizer that achieves a new level of ...
CONTACT SUPPLIER -
Manufacturerbased in The Woodlands, TEXAS (USA)
HES is a global supplier of VOC abatement, air pollution control equipment, and energy recovery equipment with over 30 years of supplying high quality systems worldwide. HES locations extend to sales, fabrication and service offices in Houston, ...
VAPOX - Model VCS - Thermal Oxidizer - Mobile Vapor Destruction System
The HES designed and manufactured mobile Vapor Control System provides “state of the art” technology for tank and vessel degassing, marine vapor loading, odor control, emergency venting, temporary loading rack VRU and pipeline letdown and flaring. ...
CONTACT SUPPLIER -
Manufacturerbased in Pittsburgh, PENNSYLVANIA (USA)
Nacah Tech excels in customized direct thermal oxidizers for difficult industrial applications with advanced burner technology including low NOx options. To best serve our customers, thermal oxidizer systems may include waste heat boilers, heat ...
Nacah Tech - Volatile Organic Compounds (VOC) Control System
All VOC generating points such as oil sumps, storage tanks for slop and feed oils, separator tanks like API’S, TPI’s, DAF systems, etc. need to be fitted with the VOC control system. This control may be either by Carbon adsorption and ...
CONTACT SUPPLIER -
Manufacturerbased in Agoura Hills, CALIFORNIA (USA)
Since 1990 Soil-Therm has been specializing in the manufacture of custom environmental and emissions control equipment for a wide range of applications. Recent advancements in Soil-Therm's patented Jet-Therm technology include In-Situ Thermal ...
Soil-Therm - Model Compact-THERM - Gas-Fired Thermal Oxidizer Systems
This is the oxidizer that started the revolution in powerful performance in compact sizes. Only 6 ft by 6 ft, with capacities to 700 cfm, powerful SVE or DPE blowers available, and the latest technologies come together in this big little powerhouse. ...
CONTACT SUPPLIER -
Manufacturerbased in Graz, AUSTRIA
CTP was founded in 1985 and since then, our engineers, chemists and researchers have been developing leading edge technologies to serve the individual needs of our customers worldwide, covering all industrial sectors. CTP is one of the world's ...
VOCNOxTherm - Model RTO+SNCR - Selective Non-Catalytic Reduction System
The VOCNOxTherm system combines low operating costs and excellent cleaning efficiency of an RTO with the NOx reduction of an SNCR. In several applications the VOCNOxTherm eliminates the need for an additional and complete SCR ...
CONTACT SUPPLIER -
Manufacturerbased in Glen Burnie, MARYLAND (USA)
DC Scientific is a Manufacturer of high quality ASTM glassware, an ISO 17025:2017 Accredited Calibration Lab and Service provider, and a leading Distributor of innovative, dependable instruments and reference materials for the Petroleum-Chemical ...
AD Systems - Model DR10 - Thermal Oxidation System
Thermal Oxidation Stability of Aviation Turbine Fuels, ASTM D3241 is universally used by the industry to measure high temperature stability of aviation turbine fuels. The ASTM D3241 is required to be run on every batch of jet fuel produced according ...
CONTACT SUPPLIER -
Manufacturerbased in Milano, ITALY
We specialise in the abatement of VOCs, acid fumes, inorganic pollutants and in building plants for the recovery of the solvent used in your production. We have been operating worldwide since 1993, coming up with cutting-edge solutions to reduce air ...
Brofind - Catalytic Oxidizers
Catalytic oxidizers make use of special catalysts to reduce the energy for activating the oxidation reactions of pollutant substances, to reduce fuel ...
CONTACT SUPPLIER -
Manufacturerbased in Pen Argyl, PENNSYLVANIA (USA)
NESTEC was incorporated in 1999. Our principals have more than 300 combined years of experience providing air pollution control solutions and abatement technologies for a wide range of industries including specialty chemicals, pharmaceuticals, ...
Equipment Inspections Service
NESTEC has a staff of experienced engineers and field service personnel who regularly perform detailed inspections. We can also respond to emergency situations and place service personnel on site in 24 hours or ...
CONTACT SUPPLIER -
Manufacturerbased in Seminole, FLORIDA (USA)
BD Environmental Solutions, is a producer of petrochemical, refinery, oil & gas and environmental technologies managed by professionals with many years of experience. Our mission is to meet the continuous development and growing demand of ...
Model RTO - Regenerative Thermal Oxidizer
A Regenerative Thermal Oxidizer (RTO) has heat recovery chambers containing beds of ceramic material to recover heat from the exhaust gas. This design allows for thermal efficiency as high as 97+ while maintaining the highest destruction efficiency ...
CONTACT SUPPLIER -
Manufacturerbased in Rockwall, TEXAS (USA)
Colt Technologies, Inc. was established in 1982 to provide air pollution control technology and specialized process equipment to U.S. industry. In over 30 years, our pollution control systems have been installed in a variety of applications with ...
MAXIM - Model AG - Acid Gas Scrubbers
Colt's custom vertical spray towers and packed bed scrubbers can be designed for process exhaust volumes to over 100,000 acfm. A variety of arrangements and options are available to suit your specific process requirements. The factory assembled ...
CONTACT SUPPLIER -
Manufacturerbased in Somerville, NEW JERSEY (USA)
Branch Environmental supplies custom built air and water pollution control equipment. Our designs are used in a wide variety of applications and industry throughout the world. Branch Environmental provides a wide variety of custom fabricated air ...
Branch - Hydrogen Sulfide (H2S) Strippers
Removal of Carbon Dioxide from water can be accomplished at low cost using a Branch Air Stripper. The C02 Degasifier is simply an air stripper designed specifically for removal of dissolved carbon dioxide. Ambient air can be used to remove the ...
CONTACT SUPPLIER -
Manufacturerbased in The Woodlands, TEXAS (USA)
Epcon Industrial Systems specializes in custom designing and manufacturing of Regenerative Thermal Oxidizers (RTO's); Recuperative Thermal Oxidizers; Direct Fired Afterburners; Industrial Furnaces; Industrial Ovens and Speciality Finishing ...
Halogenated Components Oxidizer
Epcon Industrial Systems designs and manufactures pre-engineered and pre-tested Afterburners, Recuperative Thermal Oxidizers and Regenerative Thermal Oxidizers (RTO) for highly corrosive Halogenated (Chloride, Bromide, HF, etc.) Component Systems. ...
CONTACT SUPPLIER -
Manufacturerbased in Bridgewater, NEW JERSEY (USA)
CSM Worldwide, Inc. is an engineering and manufacturing leader in the air pollution control industry established in 1897. CSM designs, engineers, manufactures, installs and maintains custom air pollution control systems which destroy volatile ...
CSM - High-temperature Thermal Oxidation Systems
High-temperature thermal oxidation is a longstanding CSM specialty. Our thermal oxidizers accomplish the same oxidation processes as our catalytic oxidizers. However, thermal oxidation is initiated in an oxidation chamber to combust pollutants at ...
CONTACT SUPPLIER -
Engineering service providerbased in Houston, TEXAS (USA)
Linde Engineering North America Inc. (LENA) is a member of the Linde Engineering Division of The Linde Group, a world leading gases and engineering company. LENA is a single-source technology, engineering, procurement and construction firm that is ...
-
Manufacturerbased in Kaukauna, WISCONSIN (USA)
TANN Corporation was formed in 1999 when the founders purchased the U.S. business operations of Langbein Engelbracht, one of the original developers of the modern day Regenerative Thermal Oxidizer. The founders of TANN Corporation and TANN Europe ...
Tann - Recuperative Thermal Oxidizers
Recuperative thermal oxidizers use a stainless steel heat exchanger to preheat the incoming process air to within 400°F of the combustion temperature prior to entering the combustion chamber. The burner will provide the remaining energy to heat ...
CONTACT SUPPLIER -
Manufacturerbased in Hernando, FLORIDA (USA)
Cycle Therm designs, manufactures and installs regenerative thermal oxidizers (RTOs) for the destruction of VOCs, HAPs and odorous emissions. Our current RTO is the genesis of more than 30 years of experience and discovery in RTO technology. It ...
Turnkey Installations Services
Would you like your only responsibility to be supplying power and gas to the RTO site? While each RTO system is site-specific, chances are, we have installed a system in an application just like yours. We have over 30 years experience installing ...
CONTACT SUPPLIER -
Manufacturerbased in Elkton, MARYLAND (USA)
Air Clear is an air pollution control and energy recovery systems manufacturer headquartered in Elkton, Maryland, U.S.A. Air Clear designs, manufactures, and installs various types of air pollution control equipment, such as, Regenerative & ...
Thermox - Recuperative & Direct Fired Thermal Oxidizers
Thermal Oxidizers can be applied to a wide variety of processes. They are often the technology of choice because of durability and adaptability over a wide range of operating conditions. Today’s Air Pollution Control applications require the ...
CONTACT SUPPLIER -
Manufacturerbased in Daresbury, UNITED KINGDOM
Operational Group provides energy and environmental engineering solutions for major process, production and manufacturing companies across a variety of industries. From our UK headquarters at Sci-Tech Daresbury, Cheshire, we utilise global insight ...
Regenerative Thermal Oxidisers (RTO’s)
The oxidation of VOC’s contained in exhaust air streams involves a chemical reaction between the VOC’s and the oxygen in the air, usually at an elevated temperature, and forming carbon dioxide and water vapour. The RTO is an extremely ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you