Thermal Oxidizers Equipment For Air And Climate Available In Oklahoma
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Direct Fired Thermal Oxidizer (DFTO) thermally destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions often discharged from industrial exhaust stacks or chemical processes. It is an ideal abatement technology for process streams heavily laden with pollutants or intermittent batch processes where the oxidizer can come on-line relatively ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Catalytic Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emissions at significantly lower temperatures than thermal oxidation technologies through the use of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil’s thermal and catalytic oxidizer technologies are capable of destroying halogenated organic acids and mixed organic vapor contaminants that are discharged from a variety of industrial process streams. We have also developed several destruction devices specifically for soil and groundwater remediation sites contaminated with chlorinated compounds such as carbon tetrachloride, ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
When catalyst is added to the media chambers of an RTO it is then referred to as an RCO. The abatement device still relies on high energy recovery to minimize auxiliary energy usage. However, the VOC compounds will oxidize at lower temperatures with the use of catalyst, further lowering the need for auxiliary energy. This is a great option for catalyst friendly compounds. Multiple catalyst and ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Pulsar 4 instruments provide infrared thermometry for sulfur reactors and other high-temperature furnaces in temperatures between 350 to 2000°C. Single channel standard model programmable for gas or refractory measurement. Two channel advanced model with simultaneous measurement of refractory and gas temperatures. Explosion-Proof Certification II 2G Ex db IIB +H2 T4, ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself. The regenerative component makes it capable of ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Thermal Recuperative Oxidizer destroys Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs), and odorous emissions discharged from various industrial processes using thermal oxidation and heat recovery. Anguil’s thermal recuperative oxidizers incorporate flexible heat exchanger arrangements, from cleanable tubes ideal for applications with particulates, to shell ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Anguil provides a broad line of technologically advanced, yet user-friendly air pollution control products for the abatement of industrial emissions like Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs), Nitrogen Oxides (NOX) and process odors. Each thermal and catalytic oxidizer product represents a value-engineered system with emphasis on cost minimization for vapor combustion ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Self-Cleaning Ceramic Filter (SCCF) collects, volatilizes and destroys particulate and condensable organics emitted from industrial process streams. It can be used independently as a filter media on hot and cold process streams or coupled with an oxidation module for total odor, Volatile Organic Compound (VOC) and Hazardous Air Pollutant (HAP) ...
-
Manufactured by Air-Clear LLCbased in USA
Catalytic Oxidizers (CATOX) use a catalyst to promote the oxidation reaction to occur. Catalytic oxidation requires less than half the heat (500-600°F) needed for thermal oxidation (1,400-1,600°F) and creates an opportunity to substantially reduce fuel expenses and material costs. The addition of a Recuperative (heat exchanger) further reduces the need for supplemental fuel. In many ...
-
Manufactured by CSM Worldwide, Inc.based in USA
High-temperature thermal oxidation is a longstanding CSM specialty. Our thermal oxidizers accomplish the same oxidation processes as our catalytic oxidizers. However, thermal oxidation is initiated in an oxidation chamber to combust pollutants at the elevated temperature of about 2000 ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
For very low VOC concentrations, Turner EnviroLogic recommends a Regenerative Thermal Oxidizer (RTO) that is capable of up to 99% destruction efficiency and up to 95% heat recovery. A two-chamber, industrial RTO equipment is the most cost effective selection. Individual heat recovery chambers are filled with a ceramic heat sink media. Incoming VOC laden air enters one of the chambers where the ...
-
Manufactured by Pollution Systems Inc.based in USA
An Electric Catalytic Oxidizer (ERCO) is a catalytic oxidizer that uses electric heaters instead of gas burners to heat the dirty air to the catalyst operating temperature. This flameless option makes the ERCO an ideal emissions control system for facilities without ready access to natural gas or those concerned with the potential hazards of gas-burning systems. Like all catalytic oxidizers, ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6042 NT/NH3/NOX Analyzer provides accurate measurement of NT (Total Oxides of Nitrogen), NH3 (Ammonia) and NOX (Oxides of Nitrogen) gas in air or low source levels from industrial processes. The Model 6042 NH3 analyzer uses the same optical bench and electronics as the Model 6040 NO/NO2/NOX Analyzer and will be referred to as the NOX analyzer. The Model 6042 uses the chemiluminescence ...
-
Manufactured by Sabio Environmentalbased in USA
The Model 6060 UV TRS Analyzer provides accurate measurement of TRS (Total Reduced Sulfur) or TS (Total Sulfur) gas in air or low source levels from industrial processes. The Model 6060 TRS analyzer uses the same optical bench as the Model 6020 UV Sulfur Dioxide analyzer. An efficient external TRS oxidizer/converter thermally converts all sulfur gases to SO2. SO2 (Sulfur Dioxide) gas that may be ...
-
Manufactured by Pingxiang Annareach Technology Co., Ltd.based in CHINA
Dense Alumina blocks also called ceramic heat exchange matrix as a reliable heat exchange media with thermal properties is the key components of the thermal storage system widely used in RTO (Regenerative Thermal Oxidizers) media and maintenance. A regenerative thermal oxidizer utilizes a unique regenerative style heat exchanger. Ceramic blocks with a pattern of channels much less susceptible to ...
-
Manufactured by CTP America Inc.based in USA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation and is a technologically advanced air pollution solution. The AutoKAT is a very cost-effective alternative if no catalyst poisons occur. Existing systems can be upgraded to an ...
-
Manufactured by NESTEC, Inc.based in USA
Thermal oxidation solutions are the core of an ecosystem that destroys pollutants and allows manufacturers to stay compliant with government regulation. For many businesses, the process of preventing VOCs from escaping into the environment takes place before and after emissions make their way to a thermal oxidizer. To ensure optimal operation in a total clean air solution, there must be multiple ...
-
Manufactured by Branch Environmental Corporationsbased in USA
Direct Thermal Oxidation involves simply applying heat to the contaminated air until the temperature is raised enough for combustion to occur. Organic compounds have a temperature at which they will begin to oxidize even if no direct flame were present. For example, if a organic compound has an auto ignition temperature of 932°F / 500°C, it would begin to convert to carbon dioxide and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you