Only show results available in Massachusetts? Ok

direct fired thermal oxidizer (Thermal Oxidizers) equipment

  • Premium

    Anguil - Model DFTO - Direct Fired Thermal Oxidizer

    The Anguil Direct Fired Thermal Oxidizer (DFTO) destroys Hazardous Air Pollutants (HAPs) and Volatile Organic Compounds (VOCs) that are discharged from industrial or chemical process exhausts. The DFTO achieves destruction of pollutants by the process of combustion. VOCs and HAPs are oxidized to carbon dioxide and water vapor with the proper ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Thermal & Catalytic Oxidizers Product line

  • Model TOX - Direct Fired Thermal Oxidizer

    The thermal oxidizer are thermal combustion systems where there is no kind of recovery of the heat produced during combustion. They are also called “Direct Fired Thermal Oxidizer.” Not having thermal recovery, the achievement of the recommended working temperature is made by the heat developed by the burner flame.

    By Pramec srl based in Legnano (MI), ITALY. from Air Depuration Product line

  • Aereon Firecat - Direct Fired Thermal Oxidizers

    AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to obtain ...

    By AEREON based in Austin, TEXAS (USA). from Thermal Oxidation/Incineration Systems Product line

  • TKS - Direct Fired Thermal Oxidizer

    The TKS Direct Fired Thermal Oxidizers are often used when High VOC Concentrations exist in a given waste stream.

    By TKS Control Systems, Inc. based in Oswego, ILLINOIS (USA).

  • Nacah Tech - Direct Fired Thermal Oxidizers System

    Nacah Tech provides the process design, mechanical design, BMS (control system) design, material procurement and fabrication, installation supervision and commissioning of Thermal Oxidizer Systems with many available accessories such as LEL analyzer, flow meters, controls, waste heat recovery, preheaters, flame arrestor, id fan, and stack. Each ...

    By Nacah Tech LLC based in Pittsburgh, PENNSYLVANIA (USA). from Thermal Oxidizer Solutions Product line

  • Model ReTherm Series - Direct Fired Thermal Oxidizer (DFTO) - Afterburner

    Our Direct Fired Thermal Oxidizer Systems are designed with superior versatility in mind. All systems are designed with the changing industrial environment in mind. The direct fired system can be modified to operate as a regenerative thermal oxidizer or a regenerative catalytic oxidizer system with the addition of ceramic or catalytic media. ...

    By American Environmental Fabrication & Supply, LLC based in Hulbert, OKLAHOMA (USA).

  • FEC - Thermal Oxidizers - Regenerative, Recuperative, and Direct Fired Thermal Oxidizers

    Fusion Environmental Corporation (FEC) offers a variety of thermal oxidation technologies to meet the varying needs of our clients. Our thermal oxidizers utilize combustion technology to convert organic molecules to CO2 and H2O. Our systems operate at temperatures of 1500 °F with retention times of typically 1 second or greater. These process ...

    By Fusion Environmental Corporation based in Atlanta, GEORGIA (US) (USA).

  • Turner EnviroLogic - Direct Fired Thermal VOC Oxidizers (No Heat Recovery)

    Turner EnviroLogic designs and manufactures direct fired thermal VOC oxidizers for applications with high VOC concentrations where the level of VOC's themselves can support combustion without the use of fuel. Such applications include pipeline venting, tank venting, solvent cleaning station venting and chemical sterilization processes. Typically ...

    By Turner EnviroLogic, Inc. based in Deerfield Beach, FLORIDA (USA). from Thermal Oxidizers Product line

  • Premium

    econ - Model HTTU - High Temperature Treatment Unit

    The econ High Temperature Treatment Unit is a continuous process designed for the treatment of catalysts and activated carbon contaminated with mercury, mercury sulphide (HgS), sulphur, and hydrocarbons. The HTTU uses a direct fired thermal oxidation technology for the high temperature (700 - 1000 °C) destruction of mercury compounds and ...

    By econ industries services GmbH based in Starnberg, GERMANY. from Technology Product line

  • Premium

    ERG - Thermal Oxidisers

    Thermal oxidation is a well-accepted method of treatment of exhaust gas containing volatile organic compounds. Thermal oxidation can also be very effective in treating liquid waste streams.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Thermal Systems Product line

  • Premium

    Process Combustion - Direct Fired Thermal Oxidisers

    When you have issues of high calorific value waste gas or a liquid stream then the Process Combustion’s Direct Fired Thermal Oxidisers meet the most stringent requirements of the European Solvents Emissions Directive (SED) and the UK’s Waste Incineration Directive. Designed and built to client’s own specific standards ...

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM. from Thermal Processes - Thermal Oxidisers Product line

  • Nacah Tech - Recuperative Thermal Oxidizers System

    Recuperative thermal oxidizers best suit VOC laden air streams with sufficient loading that provides more heat than for sound RTO’s operation but insufficient normal loading for DFTO (direct fired thermal oxidizer). Recups reduce the operating costs to an optimum level while not overheating or overloading the system.

    By Nacah Tech LLC based in Pittsburgh, PENNSYLVANIA (USA). from Thermal Oxidizer Solutions Product line

  • Catalytic and Thermal Oxidizer

    There are basically four types of thermal oxidizer. Direct fired thermal oxidizer, recuperative thermal oxidizer, regenerative thermal oxidizer (RTO), and flameless thermal oxidizer (FTO). All of these thermal oxidizers operate on the same principle of thermally promoting an oxidation reaction between the pollutant compound in the exhaust gas and ...

    By EnviroLogek Technologies based in Culver City, CALIFORNIA (USA). from Environmental Engineering & Remediation Product line

  • Thermal Oxidizers and Oxidation Systems

    Direct-fired thermal oxidizers (no heat recovery boiler or heat exchanger), Horizontal, Vertical up-fired or down-fired thermal oxidizers, Fume Incinerators, Heat exchanger options - waste heat boilers, heat exchangers, or secondary heat recovery, Tail gas incinerators.

    By MRW Technologies, Inc. based in Glenpool, OKLAHOMA (USA).

  • Lundberg - Thermal Oxidizer Systems

    The Lundberg dedicated thermal oxidizer systems have been developed over the years for harsh industrial environments. Our designs include direct fired oxidizers, regenerative thermal oxidizers, and regenerative catalytic oxidizers. These systems are designed to combust a wide variety of industrial pollutants and to meet or exceed all environmental ...

    By Lundberg, LLC based in Bellevue, WASHINGTON (USA). from Environment Solutions Product line

  • Geoenergy GeoTherm II - Regenerative Thermal Oxidizer

    Our dedicated thermal oxidizer systems have been developed over the years for harsh industrial environments. These designs include direct fired oxidizers, regenerative thermal oxidizers, and regenerative catalytic oxidizers. The systems are designed to combust a wide variety of industrial pollutants and to meet or exceed all environmental ...

    By Dustex Corporation based in Kennesaw, GEORGIA (US) (USA).

  • PCC - Thermal Oxidizers

    PCC thermal oxidizers operate on the principle mentioned above, which is thermally promoting an oxidation reaction between the pollutant compound in the exhaust gas and the available oxygen. We supply two types of the Thermal Oxidizers: direct fired (afterburner) and recuperative thermal oxidizers.

    By Process Combustion Corporation based in Pittsburgh, PENNSYLVANIA (USA).

  • Recuperative Thermal Oxiaiser

    Where the concentration of the VOC is relatively high, support fuel use will be low. The heat contained within the clean exhaust gases can be used to preheat the incoming waste gasses prior to the oxidiser furnace. This will further reduce the support fuel use. Additionally a secondary heat exchanger can also be used to recover still further an ...

    By Envirocombustion Systems Limited based in Congleton, UNITED KINGDOM. from Thermal Oxidisers Product line

  • EIS - Direct Fired Oxidisers System

    A direct fired oxidiser is effectively a combustion chamber with suitably designed burner. The exhaust temperature from a direct fired unit is typically the same as the combustion chamber temperature. This type of oxidiser is, therefore, normally only used where fuel is free or where the inlet concentration of the airstream to be treated is very ...

    By Environmental Integrated Solutions (EIS) based in Halesowen, UNITED KINGDOM. from Thermal Oxidisers Product line

  • Direct Thermal Fired Oxidisers

    Here at Envirocombustion Systems Ltd we are pleased to supply and install direct- fired thermal oxidisers. These units have been expertly designed and manufactured to optimise destruction and operating efficiency. They are engineered to suit bespoke conditions and can feature scrubbing equipment to remove acid if required. Please contact us at ...

    By Envirocombustion Systems Limited based in Congleton, UNITED KINGDOM. from Thermal Oxidisers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you