Only show results available in Massachusetts? Ok

thermal oxidizer manufacturer (Thermal Oxidizers) equipment

  • Thermal Oxidizers

    Air pollution control using a thermal oxidizer (also known as a fume incinerator), is appropriate in many process applications including processes where particulates may be present or have higher concentrations of Volatile Organic Compounds (VOCs). Pollutants like VOCs are emission issues that must be treated before being released to the earth’s ...

    By Pollution Systems based in The Woodlands, TEXAS (USA). from Thermal Oxidizers Product line

  • Recuperative Thermal Oxidation

    Installations for VOC's Volatile Organic Compounds reduction by means of thermal oxidation designed and manufactured by Kalfrisa guarantee an optimum efficiency, thanks to the appropriate selection of temperature, residence time and mixture turbulence.

    By Kalfrisa, S.A. based in Zaragoza, SPAIN. from VOC Abatement Product line

  • Model RTO - Regenerative Thermal Oxidizers

    Regenerative Thermal Oxidizers – Air Clear Regenerative Thermal Oxidizers (RTO) Manufacturer of Custom Designed Systems. Thermal Regenerative Oxidizers are the most energy efficient and cost effective solutions for the reduction of Volatile Organic Compounds (VOCs) and odorous air emission.  The primary function of the Thermal ...

    By Air-Clear LLC based in Elkton, MARYLAND (USA). from Thermal & Catalytic Oxidizers Product line

  • Model A-SH - Incinerator System For Industrial Waste: Solid Waste - Thermal Oxidizer Systems

    This incinerator system for industrial waste, GEI model A-SH solid waste thermal oxidizer system/incinerator is manufactured with a 2-3 cell stepped hearth, designed to process a higher volume, continuous feed, waste disposal, using controlled air within the primary combustion chambers. This waste incinerator systems are also known as 'Stepped ...

    By GEI Works, Inc. based in Sebastian, FLORIDA (USA). from Commercial and Industrial Incinerators Product line

  • ComEnCo - Thermal, Catalytic Oxidizers & RTO

    ComenCo Systems, Inc.’s Thermal and Catalytic Oxidizers enable manufacturers in process heatinehg industries to eliminate industrial exhaust emissions (up to 99%) using the heat generated from their industrial processes. By recycling the existing heat, oxidation equipment enables manufacturers to optimize heat efficiencies and save energy ...

    By ComEnCo Systems Inc. based in Richmond Hill, ONTARIO (CANADA).

  • TRITON - Regenerative Thermal Oxidizer (RTO) - Air pollution Control

    The TRITON Regenerative Thermal Oxidizer by Alliance Corporation represents the finest Regenerative Thermal Oxidizer available and our highest performance product. The TRITON fundamentally differs from the rest of the pack in that the TRITON includes 3 heat exchange beds in contrast to the 2-Bed design Regenerative Thermal Oxidizers emphasized by ...

    By Alliance Corporation based in La Habra, CALIFORNIA (USA). from Regenerative Thermal Oxidizers Product line

  • Soitec Xtreme SOI For Advanced Low-Power Digital Applications

    Our Soitec Xtreme SOI products provide optimal uniformity for planar fully-depleted CMOS platforms. We can supply standard and customer-specific structures. We draw upon our proven manufacturing track record to fabricate our Xtreme product line to the highest standards in terms of quality, yields, and productivity.

    By Soitec based in Bernin, FRANCE.

  • Soitec - Model FD-2D - Next Generation Performance with Current Technology

    As it’s getting harder and harder to make strides towards energy efficiency and high performance in a cost-effective way, innovative Soitec FD-2D wafers provide an early and low-risk path to continue the pace of technology advancement, now for 28 nm down to 14 nm.

    By Soitec based in Bernin, FRANCE. from Digital SOI Product line

  • Thermal and Catalytic Oxidizers System

    Thermtech, Inc. designs, engineers and manufactures thermal and catalytic oxidizers with capacities ranging from 100 SCFM to 30,000 SCFM. Our Thermal Oxidizers have a destructive efficiency of 99% +, operating temperatures to 2100°F and retention times as required to achieve desired performance. We also offer Catalytic Oxidizers with ...

    By ThermTech, Inc. based in Kingwood, TEXAS (USA).

  • Halogenated Components Oxidizers

    Epcon Industrial Systems designs and manufactures pre-engineered and pre-tested Afterburners, Recuperative Thermal Oxidizers and Regenerative Thermal Oxidizers (RTO) for highly corrosive Halogenated (Chloride, Bromide, HF, etc.) Component Systems. Afterburners are installed between the oxidizer and the vapor source.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA). from Thermal Oxidizers Product line

  • Direct Thermal Fired Oxidisers

    Here at Envirocombustion Systems Ltd we are pleased to supply and install direct- fired thermal oxidisers. These units have been expertly designed and manufactured to optimise destruction and operating efficiency. They are engineered to suit bespoke conditions and can feature scrubbing equipment to remove acid if required. Please contact us at ...

    By Envirocombustion Systems Limited based in Congleton, UNITED KINGDOM. from Thermal Oxidisers Product line

  • Turner EnviroLogic - Direct Fired Thermal VOC Oxidizers (No Heat Recovery)

    Turner EnviroLogic designs and manufactures direct fired thermal VOC oxidizers for applications with high VOC concentrations where the level of VOC's themselves can support combustion without the use of fuel. Such applications include pipeline venting, tank venting, solvent cleaning station venting and chemical sterilization processes. Typically ...

    By Turner EnviroLogic, Inc. based in Deerfield Beach, FLORIDA (USA). from Thermal Oxidizers Product line

  • Cire Technologies - Recuperative Thermal Oxidizers

    Cire Technologies has manufactured recuperative thermal oxidizers since its inception. We use only construction techniques that are proven by years of equipment operation. You will not find a thermal oxidizer built by us that uses a plate type heat exchanger. They fail prematurely compared to tube and shell heat exchanger.

    By Cire Technologies, Inc. based in Mountain Lakes, NEW JERSEY (USA). from Oxidizer Systems Product line

  • H2S Oxidizers

    Epcon Industrial Systems designs and manufactures pre-engineered and pre-tested Regenerative Thermal Oxidizers (RTO) and Recuperative Thermal Oxidizers for H2S Systems. Afterburners are available; they are installed between the oxidizer and the vapor source.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA). from Thermal Oxidizers Product line

  • FEC - Thermal Oxidizers - Regenerative, Recuperative, and Direct Fired Thermal Oxidizers

    Fusion Environmental Corporation (FEC) offers a variety of thermal oxidation technologies to meet the varying needs of our clients. Our thermal oxidizers utilize combustion technology to convert organic molecules to CO2 and H2O. Our systems operate at temperatures of 1500 °F with retention times of typically 1 second or greater. These process ...

    By Fusion Environmental Corporation based in Atlanta, GEORGIA (US) (USA).

  • Epcon - Model RTO - Regenerative Thermal Oxidizers

    Epcon takes great pride in having excellent Engineering and Manufacturing capability to design and fabricate highly-efficient, high-quality and high-performance Regenerative Thermal Oxidizers (RTO), which always meet or exceeded our customer expectations.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA). from Thermal Oxidizers Product line

  • Thermal Oxidizers/ Regenerative Thermal Oxidizers (RTO) System

    RTOs or Regenerative Thermal Oxidizers are the most energy efficient oxidizer designs. Catalytic Combustion Corporation manufactures RTOs and other thermal oxidizers at the CCC facility in Bloomer, WI. Thermal oxidizers can be direct thermal oxidizers with no energy recovery, recuperative thermal oxidizers, and regenerative thermal oxidizers ...

    By Catalytic Combustion Corporation (CCC) based in Bloomer, WISCONSIN (USA). from VOC Control Catalysts Product line

  • Recuperative Thermal Oxidizers

    A recuperative thermal oxidizer is best for process applications with lower flow rates or VOC concentrations above 10% LEL. Applications of a recuperative thermal oxidizer include amine treater off gas, cellulosic ethanol plants, calciner and spray dryer exhaust, and chemical manufacturing processes.

    By Catalytic Combustion Corporation (CCC) based in Bloomer, WISCONSIN (USA). from VOC Control Catalysts Product line

  • Thermal Oxidizers and Oxidation Systems

    Direct-fired thermal oxidizers (no heat recovery boiler or heat exchanger), Horizontal, Vertical up-fired or down-fired thermal oxidizers, Fume Incinerators, Heat exchanger options - waste heat boilers, heat exchangers, or secondary heat recovery, Tail gas incinerators.

    By MRW Technologies, Inc. based in Glenpool, OKLAHOMA (USA).

  • Semiconductor Manufacturing

    ALZETA combustion technology provides numerous benefits for the semiconductor manufacturing industry.  Our flameless oxidation systems, catalytic oxidizers, surface burners, and other designs deliver superior performance, while meeting the industry’s needs for compact size, low down time, and minimal maintenance.

    By Alzeta Corporation based in Santa Clara, CALIFORNIA (USA). from Applications Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you