Only show results in Texas? Ok

used recuperative thermal oxidizer (Thermal Oxidizers) equipment

  • Premium

    Munters - Zeolite Rotor VOC Concentrator with Desorption Heater

    Munters zeolite rotor concentrator is integrated with a direct gas-fired air heater to provide the necessary heat for rotor regeneration.  Solvent laden air is drawn through the zeolite rotor concentrator where the VOCs are removed by adsorption.  The rotor turns continuously transporting VOC laden zeolite into a regeneration zone where ...

    By Munters based in Amesbury, MASSACHUSETTS (USA). from Pollution Control & VOC Abatement Product line

  • Recuperative Thermal Oxidizers

    VOC abatement using Recuperative Thermal Oxidizers is appropriate in many process applications including processes where particulate may be present, with higher Volatile Organic Compounds (VOC’s) concentrations or even where a large amount of heat energy may be needed somewhere else in your facility. Pollution Systems’ designs are able to ...

    By Pollution Systems based in The Woodlands, TEXAS (USA). from Thermal Oxidizers Product line

  • Cire Technologies - Recuperative Thermal Oxidizers

    Cire Technologies has manufactured recuperative thermal oxidizers since its inception. We use only construction techniques that are proven by years of equipment operation. You will not find a thermal oxidizer built by us that uses a plate type heat exchanger. They fail prematurely compared to tube and shell heat exchanger.

    By Cire Technologies, Inc. based in Mountain Lakes, NEW JERSEY (USA). from Oxidizer Systems Product line

  • Thermal Incineration Unit (TIU)

    The thermal incinerator with recuperative heat exchanger will be used especially for oxidation of medium and high concentration off-gas streams. Using the additional heat recovery systems ensures optimum energy recovery. The clean gas at 750 °C passes through the heat exchanger (counter-flow system). It is heated up to optimum temperature. The ...

    By Gesellschaft für Umwelt- und Verfahrenstechnik mbH based in Hasselroth - Gondsroth, GERMANY.

  • H2S Oxidizers

    Epcon Industrial Systems designs and manufactures pre-engineered and pre-tested Regenerative Thermal Oxidizers (RTO) and Recuperative Thermal Oxidizers for H2S Systems. Afterburners are available; they are installed between the oxidizer and the vapor source.

    By Epcon Industrial Systems, LP based in The Woodlands, TEXAS (USA). from Thermal Oxidizers Product line

  • EIS - Recuperative Thermal Oxidisers System

    Volatile Organic Compounds (VOCs) can be converted to carbon dioxide and water vapour by thermal oxidation at temperatures typically above 750oC.

    By Environmental Integrated Solutions (EIS) based in Halesowen, UNITED KINGDOM. from Thermal Oxidisers Product line

  • Regenerative Thermal Oxidizers (RTOs)

    For the control of low concentration hydrocarbon contaminated air streams, RTO’s offer unmatched fuel efficiency. The energy of the hot combustion products is used to preheat the incoming waste gas. Unlike Recuperative Thermal Oxidizers that perform this function using an indirect contact heat exchanger (shell-and-tube or plate-plate type) ...

    By Warner Nicholson Engineering Consultants, PC based in Tulsa, OKLAHOMA (USA). from Vapor Destruction Technologies Product line

  • Tann - Recuperative Thermal Oxidizers

    Recuperative thermal oxidizers use a stainless steel heat exchanger to preheat the incoming process air to within 400°F of the combustion temperature prior to entering the combustion chamber. The burner will provide the remaining energy to heat the process air to the combustion chamber temperature of ~1,400°F. In the combustion ...

    By TANN Corporation based in Kaukauna, WISCONSIN (USA). from VOC Control Systems Product line

  • PCC - Thermal Oxidizers

    PCC thermal oxidizers operate on the principle mentioned above, which is thermally promoting an oxidation reaction between the pollutant compound in the exhaust gas and the available oxygen. We supply two types of the Thermal Oxidizers: direct fired (afterburner) and recuperative thermal oxidizers.

    By Process Combustion Corporation based in Pittsburgh, PENNSYLVANIA (USA).

  • TKS - Recuperative Thermal Oxidizers

    The TKS Recuperative Thermal Oxidizers are often used when low to moderate levels of Hazardous Air Pollutants (HAPs) and Volatile Organic Compounds (VOCs) exist in a given waste stream. This air pollution control device combines the right levels of turbulence, oxygen, time, and temperature in order to reach the ideal thermal oxidation.

    By TKS Control Systems, Inc. based in Oswego, ILLINOIS (USA).

  • GCES - Catalytic Oxidizers

    The chemical process of catalytic oxidation is quite simple – the temperature of the exhaust stream is sufficiently elevated to a point in which the chemical bonds that hold the VOC molecules together are broken (oxidized) across the precious metal contained in the catalyst media.  The Volatile Organic Compounds (VOCs) contained in the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you