Thermal Oxidizers Equipment For Air And Climate In France
-
based in AUSTRIA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation. The AutoKAT is a very cost-effective alternative for well understood waste streams. Existing RTO systems can be upgraded to an ...
-
Manufactured by Dürr Systems, Inc.based in USA
Alongside complete Air Pollution Control Systems, Dürr also provides additional parts for upgrading existing systems. These may have been originally supplied by Dürr or by other manufacturers. Because the Oxi.X burner system is used for the combustion of pollutants, it falls into the category of thermal processes for Air Pollution ...
-
Manufactured by Muntersbased in USA
Munters Zeolite Rotor Concentrator is fully integrated with a recuperative thermal oxidizer for VOC destruction. Solvent laden air is drawn through the Zeolite Rotor Concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden Zeolite into an isolated regeneration zone where heated air is used to desorb the VOCs. The desorbate, a highly concentrated ...
-
Manufactured by Dürr Systems, Inc.based in USA
The patented technology of thermal oxidation for siloxane containing gases. During the oxidation of siloxane-laden exhaust, silicon dioxide (SiO2) will be created. This tends to be very sticky and fluffy in nature and typically results in clogging of the heat exchanger media in regular RTO systems. DeSiTHERM™ avoids this problem via continuous cleaning of the special ceramic heat ...
-
Manufactured by NIRA New Instruments and Research for Analysisbased in ITALY
Our FID LEL proposes some innovative technical characteristics, which allow continuous measures of total hydrocarbon ...
-
Manufactured by Muntersbased in USA
Munters zeolite rotor concentrator is integrated with a direct gas-fired air heater to provide the necessary heat for rotor regeneration. Solvent laden air is drawn through the zeolite rotor concentrator where the VOCs are removed by adsorption. The rotor turns continuously transporting VOC laden zeolite into a regeneration zone where heater air is used to desorb the VOCs forming a highly ...
-
based in AUSTRIA
The perfect CTP-solution for combined cleaning of low laden organic waste gas flows and high caloric off gas and/or liquids even without LEL protection. The Hybrid-RTO is especially suitable for small flows at concentrations > LEL, which occur continuously or discontinuously. Design of the raw gas injection is possible in ...
-
Manufactured by Dürr Systems, Inc.based in USA
Sorpt.X SB biogas purification systems use only water to remove CO2, H2S, and light siloxanes from digester, wastewater treatment, landfill, or other biogas streams. Sorpt.X SB systems capture more than 98.5 percent of the methane and purify it to pipeline quality natural ...
-
Manufactured by Dürr Systems, Inc.based in USA
RCO (regenerative catalytic oxidizer) systems combine the advantages of regenerative heat exchangers with those of catalytic oxidation. They are used to reduce pollutant levels in exhaust air that is not heavily contaminated and to minimize ...
-
based in AUSTRIA
The perfect CTP-solution for a combined cleaning of organic pollutants (RTO) and nitrogen oxides (SCR) at high efficiencies. The RTO-i-SCR is suitable for flow rates up to 300.000 Nm³/h at raw gas temperatures up to ...
-
Manufactured by Dürr Systems, Inc.based in USA
Classic OxiTHERM thermal oxidation technology compromises a combustion chamber - with a refractory fibre or brick lining - and a burner to oxidise VOC at temperatures >800°C. The installed burner system can also handle ex-rated waste gas streams. Downstream, the energy in the clean hot gas can either be used within the process to preheat the raw gases or externally for the pruposes of ...
-
Manufactured by Dürr Systems, Inc.based in USA
In order to reduce the energy consumption of thermal systems at low VOC input concentrations, systems to increase the VOC concentration can be highly cost-effective. For processes operating round the clock, a RoCoSORB™ continuous rotor concentrator system is used. This incorporates a rotating adsorber wheel which enable continuous collection and desorption of the VOC. The VOC are ...
-
Manufactured by Dürr Systems, Inc.based in USA
The Oxi.X RL is a unique regenerative thermal oxidizer with a rotary distributor valve that is capable of removing more than 99% of volatile organic compounds (VOCs), hazardous air pollutants (HAPs), and odors from industrial exhaust gas flows. The Oxi.X RL is based on the thermal ...
-
based in AUSTRIA
The perfect CTP solution as an air pollution control treatment for increased solid matter content (dust), sticky substances or corrosive components in the waste gas. The AutoTherm is suitable for flow rates of up to 300,000 Nm³/h, independent of the concentration and the nature of the contaminants. For waste gas temperatures from -20°C up to ...
-
by Waterleaubased in BELGIUM
The PUTTART vertical dryer-granulator is a high capacity installation for simultaneous sludge drying and granulating and can be used for municipal and industrial sludge. The unique drying-granulating combination results in a valuable pathogen-free, easy storage fertilizer end-product. ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Designed for safety and serviceability, the WDG-V is a flue gas analyzer designed to provide accurate measurements of oxygen (O2), combustibles (CO+H2) and methane (CH4) for process control and safety in combustion applications. Offering safe, reliable operation through continual diagnostic checks and proactive alarms, the analyzer provides an additional layer of safety in burner management ...
-
Manufactured by Prodesa Medioambientebased in SPAIN
Regenerative thermal oxidizers consist of several vertical prism towers, partially filled with ceramic material, and an oxidation chamber which joins the ...
-
Manufactured by EXTRATEX S.A.R.Lbased in FRANCE
Supercritical Water Oxydation (SCOW), sometimes referred to as Hydrothermal Oxidation is a high-efficiency, thermal oxidation process capable of treating a wide variety of hazardous and non-hazardous wastes. The reaction takes place at elevated temperature (above 374°C) and pressure (above 220.5 bar) above the critical point. SCOW is ideally suited for treating waste streams containing high ...
-
Manufactured by Dürr Systems, Inc.based in USA
The most universally-used thermal oxidation technology with lowest operating costs owing to integrated heat recovery. This is achieved via batch usage of at least two regenerator chambers filled with ceramic heat storage media. These are used to preheat the waste gases and to recover the energy from the combustion process. A burner is installed for the start-up. The most popular sizes of ...
-
Manufactured by Fives I.T.A.S. s.p.a.based in ITALY
The oxidizing reactions, that take place in thermal plants at temperature above 700 °C, may be obtained at lower temperatures by means of a catalytic bed consisting of metal oxides or salts of precious ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you