Thermal Oxidizers Equipment For Air And Climate In Pennsylvania
-
Manufactured by NESTEC, Inc.based in USA
Thermal oxidation solutions are the core of an ecosystem that destroys pollutants and allows manufacturers to stay compliant with government regulation. For many businesses, the process of preventing VOCs from escaping into the environment takes place before and after emissions make their way to a thermal oxidizer. To ensure optimal operation in a total clean air solution, there must be multiple ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Designed for safety and serviceability, the WDG-V is a flue gas analyzer designed to provide accurate measurements of oxygen (O2), combustibles (CO+H2) and methane (CH4) for process control and safety in combustion applications. Offering safe, reliable operation through continual diagnostic checks and proactive alarms, the analyzer provides an additional layer of safety in burner management ...
-
Manufactured by NESTEC, Inc.based in USA
For manufacturers that produce high-VOC emissions, it can be difficult to find the right thermal oxidation system to ensure compliance with the regulations of the EPA or other governing bodies. Many thermal oxidation solutions aren’t equipped to handle high concentrations of VOCs and HAPs over long periods of time and may fail or be damaged by emissions that contain them. Circumstances like ...
-
Manufactured by NESTEC, Inc.based in USA
Though new designs and technologies in thermal oxidation have been discovered since the turn of the century, the core process has existed for decades. Regenerative thermal oxidizers (RTOs) have remained popular for many types of manufacturers due to their longevity, simplicity and immense efficiency. RTOs work by drawing in processed emissions through a fan, heating them to extremely high ...
-
Manufactured by NESTEC, Inc.based in USA
Fugitive emissions are a fact of many production processes. When they happen, VOCs cannot be allowed to make their way into the environment, for risk of damaging the local ecosystem and breaking EPA regulations. Manufacturers must find efficient and effective ways of dealing with VOCs and HAPs that don’t go where they are supposed to, directly into the thermal oxidation process. While ...
-
Manufactured by Nacah Tech LLCbased in USA
Recuperative thermal oxidizers best suit VOC laden air streams with sufficient loading that provides more heat than for sound RTO’s operation but insufficient normal loading for DFTO (direct fired thermal oxidizer). Recups reduce the operating costs to an optimum level while not overheating or overloading the ...
-
Manufactured by FlexCombased in USA
Industrial Balancing Dampers, like Butterfly Dampers, are commonly used for installations that require airflow shutdown, system isolation, or airflow bypass. The difference between Balancing Dampers and Butterfly Dampers is that Balancing Dampers are actuated manually. Manipulating airflow simply by having their position adjusted, Balancing Dampers are used primarily to prevent air pressure ...
-
Manufactured by NESTEC, Inc.based in USA
While EPA, federal and local regulations are generally the same when applied to manufacturers of all types, not all thermal oxidation systems are created equal. Companies that produce HAPs and VOCs as a byproduct of their manufacturing processes often have different needs depending on a variety of factors. Catalytic thermal oxidizers use precious and base metal catalysts to increase the ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
The HD-Cat is the answer when it comes to chlorinated and fluorinated clean-ups. No need to transport hazardous materials such as soil or carbon off-site for disposal. The HD-Cat converts the hazardous materials into carbon dioxide, water vapor and salt ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
The horizontal version (HGTO) is available in sizes to 4,000 SCFM and can be fitted with a heat exchanger. The Horizontal Gas Thermal Oxidizer general arrangement is well suited to adding an optional heat ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
A recuperative thermal oxidizer is best for process applications with lower flow rates or VOC concentrations above 10% LEL. Applications of a recuperative thermal oxidizer include amine treater off gas, cellulosic ethanol plants, calciner and spray dryer exhaust, and chemical manufacturing ...
-
Manufactured by APC Technologies, Inc.based in USA
APC Technologies offers five odor control systems: CarbonPure Adsorption Systems, GP Series (Wet) Gas Scrubbers, Thermal and Catalytic Oxidizers, and Ultra High-Efficiency Filter (UHF®) systems. A variety of factors should be considered when selecting an odor control system, including inlet odor concentrations, contaminants present and loading levels, and lifecycle cost of each system. APC ...
-
Manufactured by Nacah Tech LLCbased in USA
All VOC generating points such as oil sumps, storage tanks for slop and feed oils, separator tanks like API’S, TPI’s, DAF systems, etc. need to be fitted with the VOC control system. This control may be either by Carbon adsorption and subsequent desorption, or by use of thermal oxidiser systems, to ensure that the vapours escaping from these units are controlled to contain the ...
-
Manufactured by Process Combustion Corporation (PCC)based in USA
The simplest type of thermal oxidizer, it does not include any type of heat recovery system to recover a portion of the waste heat generated by the combustion ...
-
Manufactured by Nacah Tech LLCbased in USA
Popular for higher VOC concentrations, thermal oxidation will combust the VOC gases to achieve very high levels of purity of the vented air. Obvious advantages are non-replacement of the spent carbon ...
-
Manufactured by NESTEC, Inc.based in USA
In manufacturing, parts need to be perfect, but sometimes the circumstances surrounding production are less so. Often, in the emission and exhaust process, there is a margin of error. Although this margin of error may be small, it still has the potential to leave a business out of compliance with regulation and may even endanger staff. Because of this potential problem, capture systems and total ...
-
Manufactured by FlexCombased in USA
Industrial Tee (T) Dampers Provide Versatile Industrial Process Control. While most industrial dampers feature some versatility between air types and air control methods, Tee Dampers, also called T Dampers, provide some of the greatest versatility: Tee dampers are used for air or gas shutoff/isolation, modulation, or diversion, across various air and gas types. ...
-
Manufactured by Thermocouple Technology, LLC (TTEC)based in USA
Techoloy: The Most Corrosion / Erosion Resistant Material Commercially Available. Techoloy outperforms other materials in the most corrosive/erosive environments. It is wear and corrosion resistant, as well as impermeable, which makes it ideal for use in strong acids and alkalies. And, since they are non-toxic, Techoloy components can be used in food and drug service ...
-
Manufactured by Catalytic Combustion Corporation (CCC)based in USA
The unique Flame-Ox (3-in-1) oxidizer system was designed to clean up severely contaminated sites. The Flame-Ox can safely process significantly higher concentrations (up to 100,000 ppm or more) and is a great match for a rapid response situation or accelerating the cleanup schedule by eliminating a need to balance process flow with dilution air. The Flame-Ox can directly accept the higher ...
-
Manufactured by Wind Defender, LLCbased in USA
Absolute Barrier Y-Series Y30BAC is a seven layer co-extruded geomembrane consisting of very flexible, linear-low-density polyethylene (LLDPE) with an inner core of chemically resistant EVOH barrier resin, designed specifically as a barrier against radon, methane and VOCs. High strength LLDPE provides exceptional tear and impact resistance. A robust stabilization package that exceeds the industry ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you