Tower Scrubbers Equipment For Air And Climate Available In Belize
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and air inlet louvre section ...
-
Manufactured by Air Chem Engineered Systems, LLC (ACES)based in USA
Packings, packing support beam, plate & multi-beam, liquid distribution headers and troughs are design to provide maximum open area, minimize solids deposits, and allow easy flushing and cleaning ability. Corrosion resistant FRP tower internals, which identify as liquid distributors, bed limiters, and packing support plates, can be easily install into any tower such as scrubbers, air ...
-
Manufactured by Colasit AGbased in SWITZERLAND
Series: RHE 315 – 1250 h. Type of construction: horizontal, single or multi-stage. Volume flow rate of waste air: 1’000 – 45’000 m3 / h. Width: 1000 / 1700 mm. Heights: 2500 / 2900 mm. Volume flow rate of washing medium: 5 – 55 m3 / ...
-
Distributed by Reecon A/Sbased in DENMARK
Gas scrubbers and chemical scrubbers which can be used for cleaning process air containing organic or inorganic compounds. The process air passes through the system in a counterflow system with a circulating liquid. Undesired compounds are transferred to the liquid phase through an absorption process allowing the air to be discharged to the ambient ...
-
based in ITALY
Operating Principals: Pollutants in the air treated by the ecochimica SCRUBBER are absorbed by chemical reaction through washing with reducing reagents. The single tower scrubbers produced by ecochimica are sized to ensure high efficiency and to guarantee emissions within legal ...
-
Manufactured by Sly, Inc.based in USA
Packed tower scrubbers (also referred to as packed bed or packed column scrubbers) are designed for chemical scrubbing of contaminants from gas streams. Internal packing in the scrubber housing provides a large wetted surface area to induce intimate contact between the contaminated gas and the scrubbing liquid. The contaminant is then absorbed into or reacted with the scrubbing liquid. ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
Packed bed scrubbers for industrial waste gas treatment use PP polyhedral balls as the main packing. The packed bed can improve the efficiency of waste gas ...
-
Manufactured by FQE Chemicalsbased in USA
FQE® LEL-Surface offers a perfect balance of cleaning and LEL reduction through a patented formulation of powerful surfactants and solvents. The chemical is designed for use in degassing tanks, towers and other vessels while providing exceptional degreasing ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
The industrial wet scrubber fully contacts the waste gas with the liquid, and uses its solubility in water or chemical reaction to reduce its concentration, thereby becoming a clean gas that meets the national emission standards. It is mainly used to treat inorganic waste gas, such as sulfuric acid mist, hydrogen chloride gas, nitrogen oxide gas with different valence states, dust waste gas, etc. ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
Electroplating / printed circuit board, waste and water treat, fume scrubber / cooling tower reservoir. Material: PVC, CPVC, PP. Performance: 8500 - 21000 ...
-
Manufactured by Lantec Products, Inc.based in USA
Your clients will think you’re magic when you specify LANPAC® tower packing for their scrubber, stripper, cooling tower, or absorption projects. That’s because LANPAC® achieves the impossible: significantly lower pressure drop and higher mass transfer efficiencies than other smaller ...
-
based in ITALY
Operating Principals: Pollutants in the air treated by the ecochimica SCRUBBER are absorbed by chemical reaction through washing with reducing reagents. The standard scrubbers produced by ecochimica are double-stage to ensure greater efficiency and to guarantee emissions within ever more restrictive legal ...
-
based in ITALY
Pollutants in the air treated by the ecochimica® SCRUBBER are absorbed by chemical reaction through washing with reducing reagents. The single tower scrubbers produced by ecochimica® are sized to ensure high effciency and to guarantee emissions within legal ...
-
Manufactured by ENVIMAC Engineering GmbHbased in GERMANY
Vane type separators are used to separate liquid droplets or dust from gas or vapour streams. They can be used at high gas or vapour velocities and allow high separation efficiency at low pressure drops. Vane type mist eliminators can be installed inside columns, evaporators and other vessels, or in a separate casing inside piping. The flow direction may be horizontal or ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
Tray towers are used for cleaning gas flows which are contaminated with both particulate and soluble noxious gases. Their unique design enables them to capture particulate >2 micron as well as soluble gases to high efficiencies of removal. ERG designs and manufactures each tray scrubber to meet your specific application and detailed ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
2-stage packed tower scrubber with recirculation pumps, chemical dosing and heat exchange for sub cooling, fan, reheater and carbon filter. Each scrubber and the carbon filter are on separate skids and can be supplied as independent modules to suit the ...
-
Manufactured by Lesni A/Sbased in DENMARK
LESNI designs and supplies a range of wet scrubbers for waste gas treatment, process gas release, vacuum processes, and general waste air vent extraction applications. The wet scrubber packages are constructed in a variety of material to suit application and mix of pollutants and process conditions. All gas scrubbers are generally fully automated to control pH dosing, level and waste handling, ...
-
Manufactured by SELIP S.p.A.based in ITALY
As Selip S.p.A. is not a company of process or engineering, does not develop all the part relating to scrubber dimensioning and any guarantee is given in this sense. Selip S.p.A. can develop tecnica and commercial offer first and then the executive project, starting from a preliminary drawing that must be provided by the ...
-
Manufactured by Yingdu Demister Pads Co.based in CHINA
Yingdu supplies demister pads with Inconel mesh fabric with 316L grid for high temperatures and corrosive environments. Inconel demister pads are made from a nickel-chromium alloy material known as Inconel, offering superior performance and durability compared to stainless steel 304 mist eliminators. Inconel alloy demister pads are highly durable and corrosion resistant, especially useful in ...
-
Manufactured by Macrotek Inc.based in CANADA
The Macrotek Packed Bed Scrubber is an air pullution control sollution that utilizes a vertical counter-current design for high efficient absorption of gases. In the vertical counter-current scrubber design, gas flows upward while scrubbing liquid flows down through banks of sprays. The absorption of gases takes place in the packed tower scrubber's random packing section and scrubbing liquid is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you