Tower Scrubbers Equipment For Air And Climate Available In Kazakhstan
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and air inlet louvre section ...
-
Manufactured by Air Chem Engineered Systems, LLC (ACES)based in USA
Packings, packing support beam, plate & multi-beam, liquid distribution headers and troughs are design to provide maximum open area, minimize solids deposits, and allow easy flushing and cleaning ability. Corrosion resistant FRP tower internals, which identify as liquid distributors, bed limiters, and packing support plates, can be easily install into any tower such as scrubbers, air ...
-
Distributed by Reecon A/Sbased in DENMARK
Gas scrubbers and chemical scrubbers which can be used for cleaning process air containing organic or inorganic compounds. The process air passes through the system in a counterflow system with a circulating liquid. Undesired compounds are transferred to the liquid phase through an absorption process allowing the air to be discharged to the ambient ...
-
Manufactured by China Xicheng EP Ltdbased in CHINA
Packed bed scrubbers for industrial waste gas treatment use PP polyhedral balls as the main packing. The packed bed can improve the efficiency of waste gas ...
-
based in ITALY
Operating Principals: Pollutants in the air treated by the ecochimica SCRUBBER are absorbed by chemical reaction through washing with reducing reagents. The standard scrubbers produced by ecochimica are double-stage to ensure greater efficiency and to guarantee emissions within ever more restrictive legal ...
-
based in ITALY
Operating Principals: Pollutants in the air treated by the ecochimica SCRUBBER are absorbed by chemical reaction through washing with reducing reagents. The standard scrubbers produced by ecochimica are double-stage to ensure greater efficiency and to guarantee emissions within ever more restrictive legal ...
-
based in ITALY
Operating Principals: Pollutants in the air treated by the ecochimica SCRUBBER are absorbed by chemical reaction through washing with reducing reagents. The single tower scrubbers produced by ecochimica are sized to ensure high efficiency and to guarantee emissions within legal ...
-
based in ITALY
Pollutants in the air treated by the ecochimica® SCRUBBER are absorbed by chemical reaction through washing with reducing reagents. The single tower scrubbers produced by ecochimica® are sized to ensure high effciency and to guarantee emissions within legal ...
-
Manufactured by Serfilco International Ltdbased in UNITED KINGDOM
Electroplating / printed circuit board, waste and water treat, fume scrubber / cooling tower reservoir. Material: PVC, CPVC, PP. Performance: 8500 - 21000 ...
-
Manufactured by SELIP S.p.A.based in ITALY
As Selip S.p.A. is not a company of process or engineering, does not develop all the part relating to scrubber dimensioning and any guarantee is given in this sense. Selip S.p.A. can develop tecnica and commercial offer first and then the executive project, starting from a preliminary drawing that must be provided by the ...
-
Manufactured by Lesni A/Sbased in DENMARK
LESNI designs and supplies a range of wet scrubbers for waste gas treatment, process gas release, vacuum processes, and general waste air vent extraction applications. The wet scrubber packages are constructed in a variety of material to suit application and mix of pollutants and process conditions. All gas scrubbers are generally fully automated to control pH dosing, level and waste handling, ...
-
Manufactured by Apex Gasgen Limitedbased in UNITED KINGDOM
The mini Air Dryer is the smallest dryer in our range, offering flow rates of up to 50 litres/min of dry air containing less than 1ppm CO2 concentrations. Like most of the products we offer there is the ability to have the machine build to suit your needs, the operating pressure of the unit can be set between 3.5 bar (50 psi) and 8.2 bar (120 psi) and the output dew point can be decreased to ...
-
Manufactured by Lantec Products, Inc.based in USA
Advantages of using Q-PAC for scrubber upgrades: Lower Pressure Drop, Increased Air Flow, Fouling & Plugging Resistant. For original equipment: Smaller Tower Diameters, Smaller Recirculation Pumps, Smaller Mist Eliminators, Reduced Packing Volume, Lower ...
-
Manufactured by Lantec Products, Inc.based in USA
Your clients will think you’re magic when you specify LANPAC® tower packing for their scrubber, stripper, cooling tower, or absorption projects. That’s because LANPAC® achieves the impossible: significantly lower pressure drop and higher mass transfer efficiencies than other smaller ...
-
Manufactured by TEMA Process B.V.based in NETHERLANDS
A Cyclone is a relative simple device that uses centrifugal force to separate larger particles from air streams. It is a high capacity / high efficiency separator that also can be used in combination with fluid bed Dryers / Coolers, Jet bag Filters, Packed Tower Scrubbers and other process equipment. Diameters from 400 to 2000 ...
-
Manufactured by AceChemPack Tower Packing Co.,Ltdbased in CHINA
AceChemPack Ceramic Intalox saddle rings (Ceramic Saddles ) are most frequently used high-performance packing and exhibit advantages for most applications in comparison with other shapes. Their smooth surface imparts a high chemical resistance and provides Ceramic Intalox saddle rings (Ceramic Saddles ) with a high level of stability. Due to their simple form, ceramic saddles can be produced ...
-
Manufactured by Yingdu Demister Pads Co.based in CHINA
Yingdu supplies demister pads with Inconel mesh fabric with 316L grid for high temperatures and corrosive environments. Inconel demister pads are made from a nickel-chromium alloy material known as Inconel, offering superior performance and durability compared to stainless steel 304 mist eliminators. Inconel alloy demister pads are highly durable and corrosion resistant, especially useful in ...
-
Manufactured by Ecowairbased in ITALY
It is a scrubber for the treatment of the air by means of chemical reaction with specific reagent. Generally it is realized in 2 sections so to increase the efficiency and grant the complete respect of rules. Section 1 - Venturi: the polluted air comes aspired in the scrubber where, for effect of the turbulence created in the throat by the high speed, a cleaning effect comes out thanks to the ...
-
Manufactured by AirPoll Technologiesbased in INDIA
Packed Tower Gas Scrubbers are low-energy gas scrubbers. They are used for gas absorption, cooling, and recovery. Because of their high scrubbing efficiency and low power consumption, they are used in many industries for a broad range of applications. Scrubbers of this type perform best when gases to be handled are free of particles, since these tend to clog the packing. In operation, scrubbing ...
-
Manufactured by FQE Chemicalsbased in USA
FQE® LEL-Surface offers a perfect balance of cleaning and LEL reduction through a patented formulation of powerful surfactants and solvents. The chemical is designed for use in degassing tanks, towers and other vessels while providing exceptional degreasing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you