Toxic Gas Monitoring Equipment For Air And Climate Available In Australasia
-
Distributed by Australian Dynamic Technologies (ADT)based in AUSTRALIA
Aust Dynamic Technologies has designed and produced many Gas Analysis Systems for all forms of ...
-
Manufactured by GDS Technologies Ltd.based in UNITED KINGDOM
Continuous monitoring. Flammable, oxygen or toxic gases. Easily installed and maintained. 2 alarm levels & relays. 4~20mA analogue output. Line blockage and pump fail monitor. Delay to alarm ...
-
Manufactured by Forensics Detectorsbased in USA
The FORENSICS basic ammonia detector is made to be a workhorse with its easy one-button operation. Turn ON and detect immediately with no complicated setup. The detector is constructed with a high-quality electrochemical sensor made in Japan. Comes factory-calibrated. Ammonia is a toxic gas that requires continuous detection to ensure wellness for occupants and your livestock, particularly in ...
-
Manufactured by Critical Environment Technologies Canada Inc. (CETCI)based in CANADA
YES Plus LGA is a multi-gas air quality monitoring and information recording instrument that simultaneously measures and records up to fifteen sensors including RH and temperature. The large, backlit, multi-line scrolling LCD display indicates the sensor types installed and measured values for each gas, battery status and more. The system utilizes a long life rechargeable NiMH battery pack ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
SensAlert ASI - Advanced Safety Integrity – The best solution for gas detection in critical safety applications. SensAlert ASI provides enhanced protection and dependability for critical safety applications where personnel, processes, and facilities are at risk. The third-party certified SIL-2 SensAlert ASI offers dependability and versatility while remaining the easiest to install, ...
-
Manufactured by Mine Safety Appliances Co (MSA)based in USA
Based on the industry-standard ALTAIR Single-Gas Detector—but with added features and functionality—ALTAIR Pro toxic gas and oxygen detectors combine reliable detection and LED/audible/flashing/vibrating alarms with clear, backlit LCD displays. Electrochemical sensors measure concentrations of toxic gas (chlorine dioxide, hydrogen cyanide and phosphine) or percent oxygen. ...
-
Manufactured by IUT Technologies GmbHbased in GERMANY
The CWA-Analyzer is a multi-gas analyzer for the high-sensitive detection and identification of Chemical Warfare Agents (CWA) and/or Toxic Industrial Chemicals (TIC) developed by IUT/IUT Medical over more than 20 years. It is best suitable for the use in homeland security, building protection, and CBRNE application in general. It is an Ion Mobility Spectrometer (IMS) (also as GC-IMS) with high ...
-
Manufactured by Energy Maintenance Technologies Ltd (EMT)based in UNITED KINGDOM
The leakage of insulating gases from GIS, switchgear and other compartments is a global issue. Insulating gas leaks present a major problem to utility companies: • Reducing plant efficiency, causing damage to assets or outages • Costing money through fines or legislative punishments • Exposure of employees to toxic gases Utilising Infrared detection technology the EMT Leak Hunter enables fast ...
-
Manufactured by U.S. Industrial Products Co.based in USA
The wall-mount toxic gas or combustible gases detector with audio/visual alarms and relay contacts provides continuous open/enclose space monitoring. This gas detection equipment basic unit has a detecting sensor and controller joining together. If necessary, remote sensor with explosion-proof junction box housing and 50 feet cable wire (longer length can be extended to 600 feet) connection are ...
-
Manufactured by Critical Environment Technologies Canada Inc. (CETCI)based in CANADA
The cGas Detector Analog Transmitter is a low maintenance gas monitoring device designed for use in non-explosion rated, commercial applications and is ideal for monitoring toxic, combustible and refrigerant gases. Powered by 24 VDC or ground referenced AC, the cGas Detector has an LCD display, temperature compensation and the firmware and configuration can be upgraded in the field using the USB ...
-
Manufactured by Conspec Controls Limitedbased in CANADA
CONSPEC’s CX Series is an economical choice for toxic, combustible, and Oxygen gas monitoring. The CX Series is a simple and “smart” gas detector designed for use in hazardous or classified locations. An industry standard 4-20mA Analog output signal can be connected to any existing PLC, DCS, or EMS system. A simplified calibration procedure allows for a quick, non-intrusive, ...
-
Manufactured by Otis Instruments, Inc.based in USA
The Otis Instruments, Inc. GenII ProSafe 4x22 Model OI-7420 is a two channel gas monitor that functions as a transmission controller. The OI-7420 monitors toxic, combustible and oxygen gas levels in ambient air by receiving and displaying 4-20mA signals from up to two wired sensor assemblies. The OI-7420 features a 160x104 graphical LCD display and is equipped with four “dry contact” ...
-
Manufactured by AFC International, Inc.based in USA
The Rae Systems AreaRae Gamma is a combination multi-gas and radiation detector equipped with a wireless RF (Radio Frequency) modem which allows the unit to communicate and transmit readings and other information on a real time basis with a remotely located base controller. The Rae Systems AreaRae Gamma combustible gas detector detects volatile organic compounds (VOC) and has a photo-ionization ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
The UniSens universal 2-wire gas transmitter handles 28 different gases, providing the most economical and flexible gas measurement system available today. Combining universal electronics, bench calibration capability, automatic sensor verification, fault detection and alarming, and superior sensor technology, UniSens is your best transmitter ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
The Air check Ex Toxic Gas Monitor is a compact gas monitoring system that’s ideal for continuously monitoring toxic and in hazardous areas. The Air check Ex non-intrusive calibration allows sensor calibration in hazardous areas without area declassification. The only tool required is a small magnetic wand, designed to be carried on a technician’s key chain. It also allows true ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
The Air check Ex Combustible Gas Monitor is a compact gas monitoring system that’s ideal for continuously monitoring toxic and corrosive gases in hazardous areas. The Air check Ex non-intrusive calibration allows sensor calibration in hazardous areas without area declassification. The only tool required is a small magnetic wand, designed to be carried on a technician’s key chain. It ...
-
Manufactured by GDS Technologies Ltd.based in UNITED KINGDOM
Continuous monitoring. Flammable, oxygen or toxic gases. Easily installed and maintained. 2 alarm levels. Alarm relay outputs. Delay to alarm options. 4~20mA analogue output. Compact size. Comprehensive fault monitoring. Line blockage monitoring. Pump failure monitor. Optional remote pumped sensor ...
-
Manufactured by Link Instruments Ltdbased in UNITED KINGDOM
The new combustible and toxic gas leak detector from Kane Environmental is a small lightweight, hand-held unit for use in any service situation. The LS1B Leak Seeka is highly sensitive and is fitted with a unique adjustable detector rate, plus an alarm, which can be calibrated to suit any application. The LS1B can detect and quickly pinpoint leaks in a wide range of toxic and combustible gases. ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
ATI's D12 Toxic and Combustible Gas Transmitter will accept up to 46 different sensors, greatly reducing the need for multiple gas transmitter models. The self-aligning sensor holder simply plugs in, with automatic gas sensor recognition and verification when contact is made. ...
-
Manufactured by New Cosmos - BIEbased in NETHERLANDS
TX - KFP - diffusion type detector a diffusion type detector for indoor use. Suitable to detect Hydrogen Fluoride (HF), Hydrogen Sulfide (H2S), Chlorine (Cl2), Silane (SiH4), Boron Trichloride (BCl3), Ammonia (NH3), Arsine (AsH3), Ozone (O3) and many more. The detector can be fitted with an external local indicator. Via the 4-20mA output it can be connected to our controller 8CWA and 16 CWA, V3M ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you