Toxic Gas Equipment For Air And Climate Available In Washington
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Model CX sensors are equipped with standard analog 4-20mA, and Modbus RTU RS-485 outputs and can be used with SmartWireless Site Sentinel CX/CXT controllers. The CX is a very low power device making it an ideal choice for a battery powered detector (optional) in applications where power is unavailable or not economically feasible. CX gas detection sensors are easily and economically deployable ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The ECO PHYSICS dilution system DIL 200/400 is designed to calibrate gas analyzers manually or remotely controlled. The device is equipped with digital mass flow controllers for highest ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
High-technology manufacturing processes often require high-purity gases. The HPGP-101-C High Pressure Gas Probe System provides reliable in-line contamination monitoring for process gases at line pressure. The High Pressure Gas Probe System is compatible with oxygen, hydrogen and most non-toxic gases, and it can be used in many reactive gas monitoring applications. The High Pressure Gas Probe ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The Long-baseline Optical Anemometer (LOA) measures path averaged crosswind and turbulence over distances of 100 meters to over 10 km. Based on optical scintillation technology, its optics 'see' the always present temperature and density variation in small parcels of air as they move through the infrared beam. OSI's patented LOA sensors are based on advanced technology tested and approved by the ...
-
PremiumManufactured by Rapid Barrier Systems Inc.based in CANADA
Patented Frostfree Re-direction Fitting! This patented simple device channels poisonous fumes asway from your furnace or boiler’s fresh air intake pipes. A must for high efficiency furnaces and boilers which otherwise convey very little heat to the end of the exhaust pipe. Simple one screw installation-for 3-inch diameter exhaust pipes. Install and forget….no maintenance required! ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD II reduces the pressure of dry, inert, non-toxic, non-flammable gases, such as Clean Dry Air (CDA), nitrogen, carbon dioxide and argon to a level acceptable for the Lasair II 110 and Lasair III 110 aerosol particle counters, which are designed to operate at atmospheric ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel for the detection of CO, NO or NO2 in a ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme TwinSet and its microprocessor-based system feature a high-quality stand-alone controller providing all the necessary hardware for the continuous monitoring of two gases in the following combinations: CO/CO, CO/CO2, CO/ NO2, CO/COMB. This unit is primarily geared towards providing alarm-activated relays for simple applications such as small parking ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR IX176 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines. It keeps the workers safe and helps prevent the facilities from being destroyed. It has a high-quality sensor, and uses natural diffusion as the method for detection. It has high sensitivity and ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Model DM-100 Series sensors feature intelligent electronics, non-intrusive operator interface and comprehensive fault diagnostics. The sensor is packaged in an electro-polished 316 stainless steel housing fitted with a ¾ inch NPT thread. The plug-in, field replaceable sensor cell features large surface area gold-plated pins that reduce the effects of corrosion in harsh industrial ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CH4 is a robust CH4 Gas Monitor that can measure methane levels in the air. This CH4 gas detector uses NDIR technology to measure CH4 concentration in the air. The industrial methane monitor is equipped with a nondispersive infrared absorption (NDIR) sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Principle : ESE-LASER-HCL-200P Portable laser gas analyzer using a Tunable Diode Laser Absorption Spectroscopy (TDLAS), the realization of the non-contact measurement in high temperature, high pressure, high dust and other harsh test conditions. High selective laser based on frequency, analyzer has good performance of anti interference. compared to the traditional analysis method, reducing the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. The CTX 300 transmits data in ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Compressed gases are viewed as critical utilities in many industries when in direct product contact or in the clean room environment. Control of the environment where Pharmaceutical and Cosmetic products are manufactured is a key element of ISO and GMP Standards worldwide. The absence of viable contamination is considered a critical quality attribute due to its potential to dramatically impact ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The PID Detector can effectively measure volatile organic compounds (VOCs) and other toxic gases. When organic gas is fed into the PID detector, an ultraviolet (UV) light source is used to open the chemical bonds of the organic gas, releasing free ions and electrons. The detector measures the charge of the ionized gas and converts it into a current signal, which is amplified to display the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
Main Function and Features: SMART sensor module, easy for replacement and maintenance. Intrinsically safe design. Wide screen LCD with backlighting. High / Low alarm adjustable. Calibration level adjustable for each calibration. Combustible gas channel with high-concentration protection function. Low-voltage alert. Internal memory storage of measurements (10,000 records). Data upload to PC. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you