Toxic Gas Equipment For Air And Climate In Asia & Middle East
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
The HPD III Aerosol Monitoring Accessory is compatible with non-toxic, non-flammable gases such as Clean Dry Air (CDA), Argon, Nitrogen and Carbon dioxide. Sampling gases at pressures greater than sea level, such as 25 – 100 psi, is challenging for particle counters. Connecting pressurized air or gas to a particle counter can defeat its flowmetering system and possibly damage the ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CO2 is a robust CO2 Gas Monitor that can measure Carbon Dioxide parameters in the air. This CO2 gas detector uses NDIR Sensing technology to measure total CO2 concentration in the air. The monitor is equipped with a CO2 sensor module. The sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), allowing detection in inaccessible locations, or in Zone 0 ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot VOC is a robust VOC Gas Monitor that can measure Volatile Organic Compounds in the air. This VOC gas detector uses photoionization detection (PID) technology to measure total volatile organic compounds in the air. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The Long-baseline Optical Anemometer (LOA) measures path averaged crosswind and turbulence over distances of 100 meters to over 10 km. Based on optical scintillation technology, its optics 'see' the always present temperature and density variation in small parcels of air as they move through the infrared beam. OSI's patented LOA sensors are based on advanced technology tested and approved by the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MX 16 is a compact digital or analog controller, one input, low-profile controller that continuously monitors gas detection, like: O2, CO2, CH4, H2, LPG. Specially designed for applications in laboratory, storage, small boiler room, and breweries or battery charging rooms, the MX 16 measuring unit prevents the risks of explosion linked to the presence of toxic, anoxic and explosive gases in ...
-
PremiumManufactured by Ecological Laboratories, Inc.based in USA
The use of MICROBE-LIFT /IND treatment technology mitigates the control of hydrogen sulfide and its generation, while improving waste oxidation processes. The continued use of MICROBE-LIFT/IND biological treatment assures improved oxidation reduction and odor abatement of the decomposing waste matter. Improved biodiversity created as a result of augmentation, along with the control and reduction ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR IX176 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines. It keeps the workers safe and helps prevent the facilities from being destroyed. It has a high-quality sensor, and uses natural diffusion as the method for detection. It has high sensitivity and ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Model DM-100 Series sensors feature intelligent electronics, non-intrusive operator interface and comprehensive fault diagnostics. The sensor is packaged in an electro-polished 316 stainless steel housing fitted with a ¾ inch NPT thread. The plug-in, field replaceable sensor cell features large surface area gold-plated pins that reduce the effects of corrosion in harsh industrial ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Combination measuring devices for gas supply with integrated ethane detector. Products from the EX-TEC HS family combine ergonomics with cutting edge technology. Thanks to its innovative design this range offers the user the right instrument for each different application. All appliances from the EX-TEC HS family meet the requirements of DVGW Code of Practice 465-4 (German Technical and ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The PID Detector can effectively measure volatile organic compounds (VOCs) and other toxic gases. When organic gas is fed into the PID detector, an ultraviolet (UV) light source is used to open the chemical bonds of the organic gas, releasing free ions and electrons. The detector measures the charge of the ionized gas and converts it into a current signal, which is amplified to display the ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Principle : ESE-LASER-HCL-200P Portable laser gas analyzer using a Tunable Diode Laser Absorption Spectroscopy (TDLAS), the realization of the non-contact measurement in high temperature, high pressure, high dust and other harsh test conditions. High selective laser based on frequency, analyzer has good performance of anti interference. compared to the traditional analysis method, reducing the ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CH4 is a robust CH4 Gas Monitor that can measure methane levels in the air. This CH4 gas detector uses NDIR technology to measure CH4 concentration in the air. The industrial methane monitor is equipped with a nondispersive infrared absorption (NDIR) sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
Main Function and Features: SMART sensor module, easy for replacement and maintenance. Intrinsically safe design. Wide screen LCD with backlighting. High / Low alarm adjustable. Calibration level adjustable for each calibration. Combustible gas channel with high-concentration protection function. Low-voltage alert. Internal memory storage of measurements (10,000 records). Data upload to PC. ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Multiple gas measuring device with infrared sensors - optimised for biogas and landfill gas. The Multitec 540 is a gas measuring device for analysing gas mixtures that are formed in biological processes. It can measure the concentration of up to five gases simultaneously. The device is fitted with infrared sensors for measuring methane and carbon dioxide. It can also be fitted with ...
-
PremiumManufactured by Bertin Technologiesbased in FRANCE
Designed for early warning and real time visualization of dangerous gases, the Second Sight® MS is the perfect solution for critical area surveillance and protection against chemical threats (Chemical Warfare Agents, Toxic Industrial Compounds). The Second Sight® MS detects, identifies and visualizes a cloud of dangerous gas in real time at a distance up to 5km, for a night and day ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Each system includes a tripod, network HMI, gas detection sensor(s), and alarm warning devices. An optional Sentinel SiteWatch provides remote access to system data via Ethernet or cellular communication. Power to the sensor assembly is supplied by a rechargeable Smart Battery Pack, disposable batteries or directly from HMI. Flexible and expandable, a Site Sentinel network can include up to 32 ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CH2O is a robust CH2O Gas Monitor that can measure formaldehyde levels in the air. This CH2O gas detector uses electrochemical sensing technology to measure CH2O concentration in the air. The industrial formaldehyde monitor is equipped with an electrochemical sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Oldham is pleased to propose its wireless system with the OLCT 80 field detector/transmitter. This model allows wireless connectivity in ATEX 1 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you