Only show results available in Connecticut? Ok

Turbine Exhaust equipment for Air and Climate

  • Premium

    TTEC - Turbine Thermocouples

    TTEC Turbine thermocouples are custom manufactured to suit a variety of Gas and Steam Turbine Applications. These units are precisely manufactured in small or large quantities as direct replacements for the original equipment sensors provided. Designs include Turbine Exhaust, Inlet Air, Wheelspace and Compressor Discharge Temperature, Thrust ...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA). from Power Industry Thermocouples Product line

  • Premium

    Pratt & Whitney - Model PWC34910-600 - Borescope Guide Tube

    Whenever undertaking fuel nozzle maintenance, make sure to perform a borescope inspection at the same time. To do this, you will need a borescope, including a borescope guide tube for accessing hard-to-reach areas of the engine. Using an articulating borescope is much easier than the old-fashioned method, which involves opening up the engine. To ...

    By USA Borescopes based in Clarksville, TENNESSEE (USA). from Accessories Product line

  • Premium

    Pratt & Whitney - Model PWC34910-800 - Borescope Guide Tube

    Whenever undertaking fuel nozzle maintenance, make sure to perform a borescope inspection at the same time. To do this, you will need a borescope, including a borescope guide tube for accessing hard-to-reach areas of the engine. Using an articulating borescope is much easier than the old-fashioned method, which involves opening up the engine. To ...

    By USA Borescopes based in Clarksville, TENNESSEE (USA). from Accessories Product line

  • Premium

    J.U.M. PreFilter - Model VE 112WP - Panel Mount Heated Sample Filter and Interface

    The VE 112WP is the wall or panel mount version of our time proven VE112 heated sample filter and interface. Can be mounted in a separate NEMA 4 type housing or the system with all analyzers and sample cooler. With our unique sample back purge system, typically no sample filter at the stack probe is needed. During back purge not only the internal ...

    By J.U.M. Engineering GmbH based in Karlsfeld, GERMANY. from Heated FID Analyzers - Sampling Accessories Product line

  • Premium

    Pratt & Whitney - Model PWC34968-1 - Borescope Guide Tube

    Whenever undertaking fuel nozzle maintenance, make sure to perform a borescope inspection at the same time. To do this, you will need a borescope, including a borescope guide tube for accessing hard-to-reach areas of the engine. Using an articulating borescope is much easier than the old-fashioned method, which involves opening up the engine. To ...

    By USA Borescopes based in Clarksville, TENNESSEE (USA). from Accessories Product line

  • Premium

    Pratt & Whitney - Model PWC34910-400 - Borescope Guide Tube

    Whenever undertaking fuel nozzle maintenance, make sure to perform a borescope inspection at the same time. To do this, you will need a borescope, including a borescope guide tube for accessing hard-to-reach areas of the engine. Using an articulating borescope is much easier than the old-fashioned method, which involves opening up the engine. To ...

    By USA Borescopes based in Clarksville, TENNESSEE (USA). from Accessories Product line

  • Premium

    Pratt & Whitney - Model PWC34910-200 - Borescope Guide Tube

    Whenever undertaking fuel nozzle maintenance, make sure to perform a borescope inspection at the same time. To do this, you will need a borescope, including a borescope guide tube for accessing hard-to-reach areas of the engine. Using an articulating borescope is much easier than the old-fashioned method, which involves opening up the engine. To ...

    By USA Borescopes based in Clarksville, TENNESSEE (USA). from Accessories Product line

  • Ingreen - Sound Proof Ducting

    Sound Proof Ducting is designed and optimized on the basis of original prototype. The Ducting consists of flat steel shell, metallic framework, composite acoustic material, metal punching plate and surrounding flange. The space between punching plate and external shell is filled with acoustic pillow. Adopting the advanced plating processing ...

    By Ingreen Technology Inc based in Ottawa, ONTARIO (CANADA).

  • Isoflex - Model FM-1-L - Fabric Expansion Compensators

    “Isoflex Expansion Compensators”, (E.X.J.), are designed to provide: Protection of ductwork and other hardware from the effects of thermal expansion absorb expansion, vibration and when specified, installation misalignment.  Minimise transmitted loads to the Turbine outlet flange and by their very construction, E.X.J.’s also ...

  • ProcessBarron - Flow Diverter Damper

    For heat recovery systems, flow diverter dampers will direct the gas to a waste heat recovery system or in a bypass mode through a silencer or stack. These diverter dampers can be manufactured with a single end pivoted blade to direct gas flow into one of the two damper outlets.

    By Process Barron based in Pelham, ALABAMA (USA). from Air Handling - Dampers Product line

  • Ingreen - Cylinder Silencer

    Cylinder Silencer is the acoustic patent equipment designed and has undertaken engineering applications for many years. (Patent No. ZL 2008 2 0091148.0).

    By Ingreen Technology Inc based in Ottawa, ONTARIO (CANADA).

  • Graham - Steam Surface Condensers

    By producing a vacuum at the turbine discharge, condensers increase the overall cycle efficiency. Graham has more than 70 years of design and fabrication experience in the steam surface condenser field. Our knowledge allows for an expedient, accurate design and fabrication process. Using design methodologies and practices that have been honed over ...

    By Graham Corporation based in Batavia, NEW YORK (USA). from Vacuum Products Product line

  • Model FDS301 - Visual Flame Detector

    The MICROPACK FDS301 is an explosion proof visual flame detector. It processes live video images to detect the characteristic properties of flames visually, by means of its FM and SIL 2 certified flame detection algorithms and on-board digital signal processing. It is the safest and most advanced flame detector on the market today, and its ...

    By Micropack Detection based in Fort Collins, COLORADO (USA). from Flame Detection Product line

  • Model FS301 - Flame Simulator

    The MICROPACK FS301 Flame Simulator is designed to test the correct operation of Visual Flame detectors. The FS301 Flame Simulator produces a unique flame pattern that is recognised by the visual flame detector and produces an alarm output. Based on a unique flame simulation technology developed by Micropack the FS301 generates an accurate flame ...

    By Micropack Detection based in Fort Collins, COLORADO (USA). from Flame Simulation Product line

  • Desalinization Systems

    Sep-Pro Systems designs and manufactures two types of desalination units. Multi-effect evaporators for seawater or brines. Reverse Osmosis for seawater desalination.

    By Sep-Pro Systems, Inc. based in Houston, TEXAS (USA).

  • Turbine Exhaust Silencer

    All of our standard and custom power generation silencers are available in any construction gauge and material to meet the most demanding application. Our application engineers review all selections to ensure the best available solution is applied to meet your needs.

    By VAW Systems Ltd. based in Winnipeg, MANITOBA (CANADA). from Turbine Division Product line

  • Ductwork Expansion Joints

    We provide the complete engineered solution to on-site problems associated with ductwork expansion. This service is based on the design and manufacturing skills of James Walker Townson in expansion joints and bellows for applications covering all ductwork temperatures and pressures. On-site surveys and full installation are vital aspects of our ...

    By James Walker Australia Pty Ltd based in Sydney, AUSTRALIA. from Expansion Joints and Bellows Product line

  • Silencers

    The CTES Division's greatest focus in a CT exhaust system is the proper design and configuration of the silencer package. The silencers are not only crucial in meeting sound attenuation requirements, but they frequently dictate the entire exhaust configuration.

    By Commonwealth Dynamics Inc. based in Portsmouth, NEW HAMPSHIRE (USA). from Turbine Exhaust Systems Product line

  • Inconel - Model 600 - High Performance Alloys

    INCONEL (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

    By Special Metals Corporation based in Huntington, WEST VIRGINIA (USA). from Inconel- High Performance Alloys Product line

  • Lectrodryer - Water Injection Skid Pump

    The Lectrodryer Water Injection Pump Skid increases the pressure of Demineralized Water supply for injection into the combustion chamber of the gas turbine. Utilizing a Water Injection Pump Skid decreases the amount of NOx in a gas turbines exhaust.

    By Lectrodryer based in Richmond, KENTUCKY (USA). from Turbine Auxiliaries Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you