Vapor Control Equipment For Air And Climate In Canada
-
PremiumManufactured by Metrohm AGbased in SWITZERLAND
Determining low moisture and water content in samples is not a problem for these coulometers. Coulometric Karl Fischer titration is the ideal method to determine low moisture and water contents in samples (0.001 to 1% water content). Our range of coulometers covers any requirements and can be combined with the KF oven method for difficult ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A high-specification opacity and dust monitor meeting global compliance standards for monitoring combustion processes. 4500 MkIII is the most accurate and reliable continuous opacity monitor available, combining AMETEK Land’s ground-breaking innovation and simple design for precise, problem-free operation. Unmatched, class-leading accuracy ensures compliance limits for dust emissions and ...
-
PremiumManufactured by AMS, Inc.based in USA
Designed to be driven into the soil, opened for sample extraction, and removed for subsequent use. The AMS Retract-A-Tip is a survey tool for collection of discrete soil vapor samples below the ground surface, usually at discrete depths. The sampler is 300 series stainless steel, with a 400 series stainless steel drive tip. It may be driven to the sampling depth using an AMS slide hammer or ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A portable monitoring device using conductive cell technology for accurate, periodic measurements of the Acid Dewpoint Temperature (ADT) in combustion processes. Designed specifically to provide the unique but vital measurement of sulphuric acid dewpoint temperature, the portable Lancom 200 supports boiler efficiency checks, corrosion protection and the management of high-cost fuel ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Vapor Implants have double woven stainless steel wire screens with a .0057-in. (0.15mm ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
The Mega Wolverine 150lb HDPE Air Pollution Control Barrel is an economical ready to use; self contained air purification unit that can remove odorous gases at air flows of up to 100 CFM. The Mega Wolverine 150LB HDPE Air Pollution Control Barrel is the perfect choice for wastewater storage/collection system tanks and high capacity lift station vents. Larger pollution control barrels are ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is an ultra high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply or dangerous and expensive gas ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 1115i Synchronized Multi-Port Sampling System utilizes the advanced capabilities of the Model 2537X Mercury Vapor Analyzer to conditionally control up to eight separate valve input/output ports. The 1100i can be configured to automatically sample eight separate input ports. With the 1115i valves can be triggered based on a pre-set activation time, a pre-set delay interval, the ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
The Mega Wolverine 50 lb HDPE Air Pollution Control Barrel is an economical, ready to use, self contained air purification unit that can treat air flows of up to 50 CFM. It is the perfect choice for wastewater storage/collection system tanks and high capacity lift station vents. Larger pollution control barrels are available for air flows up to 250CFM as special order. The PCB-50 comes standard ...
-
PremiumManufactured by Absolute OzoneĀ®based in CANADA
The purpose of the ozone destructors is to convert ozone gas into harmless oxygen before releasing it into the atmosphere. The AOD series Ozone Destruct Unit utilizes a thermal-catalytic method to remove excess ozone. The destructor device uses Carulite 200. The ozone does not consume it and is a safe material that is not considered hazardous ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Non-contact infrared thermometer custom-designed for accurate preform temperature measurements in optical fibre manufacture. Optimised for precise preform temperature control in vapour deposition processes, AMETEK Land’s Vapour Deposition Thermometer delivers a critical measurement for production of low-loss, high-bandwidth optical fibre. VDT enables exact sighting onto the rotating preform ...
-
PremiumManufactured by AMS, Inc.based in USA
Easily and economically sample soil gas vapors at shallow depths for preliminary testing. The AMS "original" gas vapor probe can take vapor samples in soils to depths of 12' depending on soil conditions. This kit is an excellent choice for shallow gas vapor sampling in soft soil. The kit includes a base section with a probe tip and soil gas access holes above. An included liner rod with tip is ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is a high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The Environics ZAG will produce high purity zero air from your dry compressed air source, eliminating the need for expensive, dangerous and bulky gas ...
-
PremiumManufactured by AMS, Inc.based in USA
Probe up to 20' with extensions!: AMS extendible tile probes are made from high carbon stress relieved steel and are not plated. Designed for probing depths of 12' or more, they may also be used to prepare holes for insertion of small diameter soil or or gas vapor probes. At deeper depths, use an AMS slide hammer or compact slide hammer. Tile Probe Complete Includes: Base extension (3' or 4' ...
-
PremiumManufactured by Hydro Quip, Inc. (HQI)based in USA
Hydro Quip’s Below Ground Oil Water Separators are newly designed. Since below ground oil water separators first entered the marketplace, there has been little innovation with the design. Most conventional designs are based on a 10:1 ratio requiring long retention times and resulting in larger units. Over the years, SPCC and NPDES have become more stringent in their guidelines, permits, and ...
-
Manufactured by Terrafix Geosynthetics Inc.based in CANADA
terrafix Environmental Technology is a corporation specializing in the installation of engineered geosynthetics. At terrafix, our people make the difference and our experienced staff works closely with clients to ensure every project is completed on time, within budget and to exacting specifications. Our field technicians are trained in all aspects of Geosynthetic installation and have extensive ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The AcuPro is an industrial strength analyzer for continuous measurement of flammable and some combustible vapors, from 0% to 100% of the Lower Flammable Limit ...
-
Manufactured by Enviro-Klean Remediation Group Inc. (EKRG)based in CANADA
The Eniro-Klean technology can process a wide range of soil types. Some soils will be easier than others to work with, which will increase the throughput of the machine. The feed system on the machine will remove any rocks or chunks over 5cm (2 inches) in size using a trommel ...
-
Manufactured by Mettler - Toledo Int. Incbased in SWITZERLAND
The GPro 500 Oxygen TDL is a unique analyzer that fits anywhere in your process thanks to the broadest range of in situ and on-line process ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
The Shand & Jurs Model 95506 Cable Sheave Case is designed to operate on pressurized product storage tanks without loss of vapors. The entire unit consists of a roof plate and three sheave cases. For ease of operation and long service life, each sheave is bushed with bronze collar bushings. Standard sheaves can accommodate cables up to 3/4" diameter. For heavier cable requirements consult ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you