Vapor Emissions Equipment For Air And Climate Available In Comoros
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Powerful and perfect for multitasking. The UniversalExtractor E-800 is powerful and perfect for demanding extraction tasks. Six distinct extraction positions enable individual process control and simultaneous operation of different extraction methods with high speed and ...
-
Manufactured by Transvac Systems Ltdbased in UNITED KINGDOM
We supply Ejectors for use on Vapour Recovery Units (VRUs), also known as Vent Gas Recovery Units. Our ejectors use Liquid Jet Pump or Gas Ejector Technology to compress vent gas for recovery. This gas is either pumped back into the storage tanks that emitted the vapour, or off into pipework for sale and distribution. Our Ejectors function by use of a high-pressure motive fluid (usually water). ...
-
Manufactured by Lamor Corporation Abbased in FINLAND
The Lamor Self-Priming Centrifugal (LSPC) 330 oil transfer pump is a skid-mounted automatic, self-priming suction pump. Designed to pump clear and dirty liquids with solids up to 7mm (3”) in diameter the pump can be used in a variety of environments. The durable construction makes the pump suitable for use with abrasive liquids. The pump is designed to be operated in the most arduous ...
-
Manufactured by Beijing Yingherui Environmental Technology Co., Ltd.based in CHINA
The Aluminum Geodesic Dome is a self-supporting cover used for municipal water and wastewater storage, petrochemical terminals, bulk material storage facilities and architectural structures, where the storage product and the structural tank components must be protected from atmospheric and environmental influences, while the same time, minimize hazardous vapour emissions and preventing water from ...
-
Manufactured by Atecobased in UNITED KINGDOM
The Ateco Guide Pole Sleeve, Leg Seals and Leg Socks are designed to control the vapour emissions coming from the slotted guide/gauge pole and the roof support legs on an external floating roof tank. Ateco Guide Pole Sleeve incorporates a reinforced premium grade urethane laminated fabric which is compatible with most hydrocarbon products as well as ozone and UV resistant. Can be fitted and ...
-
Manufactured by Aerosolv - A Justrite Group Companybased in USA
The Aerosolv 7000XL Can Puncturing System is specifically designed to comply with California's rigorous vapor emission regulations while minimizing your aerosol can waste stream. Intact, aerosol cans are considered hazardous waste, but once punctured and drained, they can be recycled as scrap ...
-
Manufactured by Heidolph Instruments GmbH & Co. KGbased in GERMANY
For all Hei-VAP Industrial models. Includes secondary condenser and air intake separation vessel. This vacuum system can be applied in many different fields in order to evacuate, evaporate and pump out gases and vapors. Thanks to the emission condenser it is possible to achieve a chemical recovery of almost 100%. ...
-
Manufactured by PETROGASbased in USA
PETROGAS offers turnkey marine vapor control systems: design, fabrication, data package, and U.S. Coast Guard certification to meet 33 CFR 154.800 ...
-
Manufactured by FLSmidthbased in USA
The best deoiler system you will ever use While it’s true that oil and water don’t mix, finding an effective and efficient system to separate the two liquids is not so easy. That is where the KREBS DeOiler Vessel steps in. Compact, consistent and incredibly low-maintenance, this proven hydrocyclone system removes hydrocarbons, regardless of flow ...
-
Manufactured by Vapor Technologies Inc.based in USA
This system is made of stainless steel and mounted to a gooseneck trailer. Vapors are scrubbed through three, 54" diameter towers (8 foot tall each). Unit has on-board pump (460V) which provides flow to all three towers. Third tower has full diameter mist eliminator which removes mist particulate from exiting the scrubber. This scrubber is rated up to 6,000 CFM. Large 1800 gallon reservoir ...
-
Manufactured by Maxwell Continental Tank Serv Engineering B.V.based in NETHERLANDS
Maxwell Aluminium Geodesic Dome Roofs for storage tanks are innovative clear-span structures custom designed to each individual tank within the requirements of API 650 Appendix ...
-
Manufactured by Puragen Activated Carbonsbased in USA
Reactivated non-hazardous carbon. 4x10 granular mesh. Economical, high purity ...
-
Manufactured by Kurz Instruments, Inc.based in USA
The Series 490-IS Mini-Anemometer incorporates Kurz sensor expertise into an inexpensive miniature Thermal Air Velocity Meter that you can take anywhere. The 490-IS is ideal for velocity measurements for EPA and OSHA emission regulations for a wide variety of vapor emission sources. The 490-IS is intrinsically ...
-
Manufactured by IPCO Power B.V.based in NETHERLANDS
The Refrigerated Vapour Recovery System (RVRS) is a flexible solution to reduce the VOC emissions and is available in mobile and fixed version. The system recovers clean product from the vapours without reportable emissions. PURGIT RVRS uses a proprietary system that condenses and recovers tank vapours. Depending on the application PURGIT's condensers are capable to recover over 99% of the VOC. ...
-
Manufactured by CST Industries Incbased in USA
CST is the world’s leading designer and manufacturer of innovative clear-span aluminum domes for municipal water and wastewater storage, petrochemical terminals, bulk material storage facilities and architectural ...
-
Manufactured by Catalytic Exhaust Products LTDbased in CANADA
Catalytic Exhaust Products Ltd. has been supplying high quality and cost competitive after market Diesel Particulate Filter (DPF) for over 25 years. Our Diesel Particulate Filter (DPF) product lines are for all types of off-highway machinery, including construction, mining, earthmoving and material handling vehicles, and portable equipment. With our advanced Diesel Particulate Filter (DPF) ...
-
Manufactured by Winovus Pte Ltd.based in SINGAPORE
Winovus is a thin-film coating company in Singapore that provides thin-film design, development and manufacture of high-performance optical coatings. ...
-
Manufactured by TESCORPbased in USA
The TESCORP “BTEX CONDENSER” Series systems are for application to meet EPA CFR 40, Subpart 0000 regulations and our customers' BTEX vapor recovery gas emission requirements. Designed and constructed for “wet/corrosive” gas applications utilizing all stainless steel components, TESCORP’s BTEX CONDENSERs are compact, self-contained, fully automated systems complete ...
-
Manufactured by Sai Tools Pvt. Ltd.based in INDIA
These seals comprise a Nitrile/PVC Wiper tip that is tightly held in continuous contact with the tank shell by a series of compression plates, which are bolted to the top of the rim. The adjoining shoe-to-shoe connection has a patented bolted & gasketted (slotted) joint design. The product "secondary" VAPOURs are contained below the seal. The WORLD'S FIRST Compression plate secondary seal ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Shand & Jurs offers a uniquely designed seal, named Expanda-Seal™, which uses tank pressure to inflate the gasket. This design actually uses the internal vessel pressure to create a tighter seal the closer the pressure gets to the set point. Whatever your industry, this high-performance sealing technology is an ideal fit for refineries, tank farms, terminals, sewage treatment plants, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you