Ventilation Monitoring Equipment For Air And Climate Near Nunavut
-
Manufactured by Secco International Inc.based in CANADA
A state-of-the-art upgradable system for a fully integrated management of the environmental ...
-
Manufactured by Durag Groupbased in GERMANY
Measuring system for continuous evaluation of flow velocity and flow direction in tunnels. Ultrasonic sensors for tunnel ventilation control system. Reliable measurement across the tunnel profile. Two identical sensors alternately transmit and receive ultrasonic pulses. The system evaluates the transition times dependant on direction and calculates flow speed. D-FL 220T requires extremely low ...
-
Manufactured by TSI Incorporatedbased in USA
TSI's VELOCICALC® Plus Multi-Parameter Ventilation Meters simultaneously measure and data log several ventilation parameters using a single probe with multiple sensors. The ventilation meters measure temperature, humidity and pressure. The meters also feature automatic calculation of flow rate and automatic conversion between actual and standard velocity readings. Six models are available, ...
-
Manufactured by TSI Incorporatedbased in USA
The TSI AeroTrak Portable Particle Counters Model 9350 offer best-in-class features and versatility. The Model 9350 provides a 1.77 CFM (50 L/min) flow with 0.3 μm sensitivity. Compatible with TSI’s accurate ventilation probes that measure air velocity/temperature/RH, Model 9350 provides you with a complete solution for your certification needs. Particle count data can be conveniently ...
-
Manufactured by TSI Incorporatedbased in USA
The TSI AeroTrak Portable Particle Counter Model 9550 offer best-in-class features and versatility. The Model 9550 provides a 1.77 CFM (50 L/min) flow with 0.5 μm sensitivity. Compatible with TSI’s accurate ventilation probes that measure air velocity/temperature/RH, the Model 9550 provides you with a complete solution for your certification needs. Particle count data can be conveniently ...
-
Manufactured by TSI Incorporatedbased in USA
The TSI AeroTrak Portable Particle Counter Model 9510 offers best-in-class features and versatility. The Model 9510 provides a 1.0 CFM (28.3 L/min) flow with 0.5 μm sensitivity. Compatible with TSI’s accurate ventilation probes that measure air velocity/temperature/RH, this product provides you with a complete solution for your certification needs. Particle count data can be conveniently ...
-
Manufactured by TSI Incorporatedbased in USA
The TSI AeroTrak Portable Particle Counter Model 9500 offers best-in-class features and versatility. Perform ISO 14644-1 classifications and complete certifications of EU GMP facilities by sampling 1 m3 of air in just 10 minutes! Particle count data can be conveniently viewed on screen, downloaded using TrakPro Lite Secure Software, or printed directly to the integrated printer.Compatible with ...
-
Manufactured by TSI Incorporatedbased in USA
The TSI AeroTrak Portable Particle Counter Model 9310 offers best-in-class features and versatility. The Model 9310 provides a 1.0 CFM (28.3 L/min) flow with 0.3 μm sensitivity. Compatible with TSI’s accurate ventilation probes that measure air velocity/temperature/RH, this product provides you with a complete solution for your certification need. Particle count data can be conveniently ...
-
Manufactured by Accutron Instruments Inc.based in CANADA
A comprehensive ventilation monitoring station, the all-in-one instrumentation solution built for underground mines. The MAQS is an affordable and complete underground mine ventilation monitoring station. Monitor your working environments, integrate and communicate with remote devices, automate your ventilation process. This flexible, low-cost instrumentation is designed to function with your ...
-
Manufactured by Accutron Instruments Inc.based in CANADA
Sentro 1 is the world’s foremost fixed gas detector for hazardous location gas detection. At the heart of Sentro 1 is the eModule; intelligent standardised gas sensing modules to cover a range of toxic and flammable gases. Dynamic and historic data is stored within each module together with the condition of the gas sensing element and its service ...
-
Manufactured by Gasera Ltdbased in FINLAND
MULTIPOINT SAMPLER is designed to enable multi-channel monitoring with any GASERA ONE analyser. MULTIPOINT SAMPLER enhances the monitoring capabilities of Gasera analysers by increasing the number of sample inlets up to 12. In addition, it performs automated sampling from multiple points. Functions are controlled with the graphical user interface (GUI) of GASERA ONE gas analyzer. It’s easy ...
-
Manufactured by Kanomax USA, Inc.based in USA
The airflow transducer model 6332/D is designed for fixed installation. The units can be wired with local electric for power and can be connected to any device that can accept analog output. Transducers are a good choice if you need to simultaneously measure airflow at multiple fixed points that may not be in proximity to other points. The relatively low cost of this solution makes it a good ...
-
Manufactured by Kanomax USA, Inc.based in USA
Based on the light scattering method, it always detects airborne particles. Pulse output that corresponds to concentration per unit volume of particles can be obtained, with using an original detection method based on light scattered principle similar to the particle ...
-
Manufactured by Kanomax USA, Inc.based in USA
Models 1550 and 1560 are the most advanced multichannel anemometers offered by Kanomax. These systems are capable of measuring many channels simulatenously and are capable of measuring temperature and relative humidity as well as ...
-
Manufactured by Kanomax USA, Inc.based in USA
The Kanomax 4-Channel Anemometer Model 1570 is an extremely capable, research grade instrument designed for high performance and precise measurements. When coupled with our highly accurate probes this four-channel anemometer provides accurate data on an easy to read LCD ...
-
Manufactured by Tandem Chillers Incbased in CANADA
Tandem Chillers Inc. designs and manufactures air cooled – free cooling modules that are easy to install, easy to repair and easy on your wallet. The water cooled modular chiller is compact in size allowing for easy installation in hard to reach places where space is severely ...
-
Manufactured by Theodor Friedrichs & Co.based in GERMANY
The temperature sensor type 2033 is equipped with a platinum resistance Pt 100, DIN 60751 B, 1/3 tolerance, with 4-wire connection, incl. 5 m measuring ...
-
Manufactured by Felix Technology Inc.based in CANADA
The Aspirator Psychrometer FT3060 series are used for measuring the air temperature and the humidity. Two parallel mounted, equal mercury thermometers are used. The bulb of one thermometer (wet bulb thermometer) is covered by a wick, which must be moistened for a ...
-
Manufactured by Felix Technology Inc.based in CANADA
Humidity/Temperature FT3030 series Sensors are used for the measurement of the relative humidity and the air temperature simultaneously. A capacitive measuring element is used for the measurement of the relative humidity and a PT100 is used for the measurement of the air temperature. Both sensors are located in a measuring probe, protected by a membrane filter. The measuring probe is placed ...
-
Manufactured by Ventech Systems Pvt. Ltd.based in INDIA
The unsatisfactory past practices to providing exhaust ventilation without giving thought as to how the outdoor replacement air is to be provided has resulted in worker discomfort, damage to the costly and sophisticated equipments consequently the impaired in-plant environment in an industry. A present day awareness of this considers the need of providing suitable make up air systems by means of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you